Table of Contents
Is it easy to change motorcycle chain?
The connection between the engine and rear tire doesn’t last forever; here’s how to replace your bike’s final-drive setup. Replacing the motorcycle chain and sprockets is a fairly easy task, but there are some pitfalls to watch out for along the way. Jun 14, 2016.
How much does it cost to replace a motorcycle chain?
It really depends on the motorcycle you’re working on. Chains can range in price from $20 for a plain chain for a small, lightweight motorcycle to over $200 for something like a quality O-ring chain for a bigger, more powerful bike.
What tools are needed to change a motorcycle chain?
Changing a chain is a fairly basic job that requires a chain breaker / riveting tool and whatever is needed to remove the rear wheel and sprockets. It’s nice to have a blow torch and a torque wrench on hand for this job, too.
Can you remove a motorcycle chain without breaking it?
cutting the chain isn’t that hard, you can use a grinder or dremel to grind off the top of two pins so that a plate can be popped off then just slide out the link. usually it’s easiest to grind the master link pins. most chains come with a 120 links so you may have to cut it to the desired length anyway.
How do you remove a motorcycle chain without master link?
If you have a standard chain with no master link: Seat the chain in the chain tool, with the pin of the chain tool aligned with a pin in the chain. Turn the handle of the chain tool until you push the pin out far enough that you can break the chain.
Do you need to change sprockets with chain?
If you determine that your chain is constantly getting stuck and lubrication is not increasing the smoothness of your ride, it’s likely time to get a new chain. However, when you replace your chain, it’s a great idea to replace your sprocket at the same time.
How often should motorcycle chain be replaced?
Most manufacturers recommend lubricating the chain every six hundred to a thousand miles, but this will be highly variable depending on where you ride and what the typical weather conditions are for you. The quality of the chain and even some bike variables enter into this so there’s really no one good answer.
What is the best motorcycle chain breaker?
Best Motorcycle chain Rivet tool reviews 2021 #1 Motion Pro P.B.R. Chain Tool. #2 Chain Breaker & Riveting Tool for Motorcycle Bike ATV 520 525 530 Chain. #3 ID KM500R Chain Cut and Rivet Tool. #4 A.B.N. #5 R.K. #6 Motion Pro 08-0058 Chain Breaker and Riveting Tool. #7 D.I.D KM500R Chain Cut and Rivet Tool, Silver.
How many miles is a motorcycle chain good for?
Don’t clean and lube your chain, replace it more often. It depends on how much rain/sand/grit you ride through in addition to your efficacy and frequency of chain cleaning. I often got 10,000 to 15,000 on a liter bike chain. I often got 20,000 to 25,000 on a VStrom 650 chain with a chain oiler.
How long should bike chain last?
Most mechanics agree that you should replace your chain about every 2,000 to 3,000 miles, depending on your riding style. Many Tour De France riders wear out two or even three chains on their primary bike over the course of the three-week race.
How often should I lube my motorcycle chain?
On a dirt bike, we recommend cleaning and lubricating your chain after every ride. On a street bike, the chain should be lubricated every 500-1000 miles depending on your riding habits and riding environment. This will ensure peak performance and sustainability for your bike.
Why did my motorcycle chain break?
Chains, like anything else on your bike, can be damaged if it gets hit hard enough. While not as common, chains can break if they are involved in a rock strike or other impact. The reason being, wear will typically only break one chain link, while impact can damage many.
Is a motorcycle chain directional?
While some bike chains are directional, most aren’t. For instance, Shimano chains tend to be directional while SRAM, KMC, Campagnolo chains are non-directional. Directional components usually have logos facing outwards on one of the side plates.
Can you take links out of a motorcycle chain?
Put a chain breaking tool on the chain and push the rivets out – do a bit on each side at a time until the chain ‘breaks’ open. Once you’ve ‘broken’ apart the master link the chain will come apart and you can pull it through and free of the bike.
