Table of Contents
What kind of concrete do you use for basement walls?
Poured Concrete Wall Basements Solid concrete is better able to resist cave-ins caused by lateral pressures of water, earth, and wind. More fire resistance-because solid concrete is dense and is joint free. More resistant to water because concrete has fewer and smaller voids than concrete block.
How do you put concrete on a basement wall?
How do you fix crumbling concrete basement walls?
You have to apply a water-based epoxy basement waterproofing coating on the wall. The epoxy will act as a bonding agent. They will penetrate the surface and mix with some of the powder while you brush the epoxy on the wall. The application of water-based epoxy as a bonding coat provides a surface.
What do you put on concrete basement walls?
The most common way to cover concrete walls in a basement is drywall, a.k.a. sheetrock. Drywall comes in panels panels made from calcium sulfate dihydrate or “gypsum.” Panels come in different thicknesses and sizes, the most common being 4′ x 8′ x 1/2″ thick.
How many bags of concrete do I need for a 10×10 slab?
The thickness of your 10′ x 10′ slab will determine just how many bags you need. The average thickness of a 10′ x 10′ concrete slab for a shed is 4 inches thick. At 4″ thick, your 10 x 10 slab will take 56 bags of concrete that weigh 80 lbs.
What is the cheapest way to finish a basement wall?
Paneling. Paneling can be used as an inexpensive way to finish you basement walls or ceiling. Use a strong adhesive to put strips of wood on your concrete basement walls, and then use wood screws that match your paneling to attach the paneling to the wood strips.
Why does parging fall off?
A sudden drop in temperature is bad news for a freshly applied coat of parging. Water soaks into the parging, then expands as it freezes, cracking the surface and breaking off chunks. If the ambient temperature is too cold -the Parging freezes.
Is Drylock good for basement walls?
Drylok is a product that is used to stop water seepage on interior masonry walls. It is supposed to seal basement foundations, primarily block foundations but I’ve seen it on concrete as well. Of course, the reason you need to seal any basement foundation is because the foundation is porous.
How do you repair old concrete basement walls?
You can use packaged masonry or concrete repair mixes, available at home improvement stores, or buy a bottle of concrete bonding agent and a bag of mortar. Brush the bonding agent onto the old concrete and let it sit until tacky.
How do you reinforce basement walls?
There are 3 widely used methods for repairing basement walls depending on the cause and type of damage: Crack repair with carbon fiber staples. Bowed wall support and/or crack repair with carbon fiber straps. Bowed wall support and relief of pressure with helical ties.
Do basement walls need to breathe?
Foundation walls like concrete are porous. This means they can take in 10-15 gallons of water vapor a day. That is why your walls need to breathe. Moisture needs somewhere to go, and a house that is sealed up too tight ends up with moisture in puddles and rotten drywall.
Do I need a vapor barrier on my basement walls?
Building codes usually require a vapor barrier (4 mil plastic sheeting) on exterior basement walls if the framing is attached to masonry or concrete surfaces, or if the wood framing butts up against the outer basement walls.
How can I make my concrete basement walls look better?
If your concrete-block basement walls are dry and free of efflorescence or mold, you can seal them with a masonry sealer or all-purpose water-base primer-sealer and paint with a high-quality latex paint. Paint is an easy way to make the basement feel warmer, brighter, and more welcoming.
How much does an 80 pound bag of concrete cover?
80 lb bag of concrete cubic feet 80 lb bag of concrete yields 0.60 cubic feet which is approximately around 0.0222 cubic yards that will cover around 3.6 sq ft area up to standard depth of 2 inch excavation or backfills, and for 1 cubic feet of landfill you will need 1.66 bags of 80 lb concrete.
What is a cheaper alternative to concrete?
There are a few different types you can find in the home improvement store that can replace concrete cement used for driveways and walkways. These include pea gravel, crushed stone, and quarry process. Cheaper than other surface materials and low-cost to install.
How many square feet does a 50 lb bag of cement cover?
Regarding this, how much does a 50 lb bag concrete cover?, as 133 lb concrete = 1 CF, so a bag of 50 lb concrete = 50/133 = 0.375 CF, therefore, a 50 lb bag of concrete approximately cover around 1.5 square feet area upto standard depth of depth of 3 inch for your patio and sidewalk.
Can I finish my basement myself?
The basic steps to finish your basement include insulating walls, choosing flooring and adding a ceiling to transform your lower level into an additional living area.
What can I use for basement walls instead of drywall?
Finishing Basement Walls Without Drywall: Options and Paint. Basement Panels. Wood Fiberboard. Fabric. Vinyl and Wallpaper. Stone Veneer. Pargeting. Exposed Brick.
Is it worth it to finish basement?
Finishing Your Basement Adds Value to Your Home According to NerdWallet, a finished basement with an entertainment area and basement bath raises a home’s value at an average of $50,000. Also, according to Zillow, homeowners see an average of 70 percent return on investment with a basement remodel.
