Table of Contents
Regularly dust and clean your hardwood floor to keep it looking like new. Avoid using water and vinegar, soap-based cleaners, wax or steam cleaners on your hardwood floor. Over time, vinegar and water will dull the floor’s finish, while soap or wax will leave a residue.
How do you maintain hardwood floors?
Here’s Exactly How To Maintain Wood Floors Clean Spills Immediately. Use Furniture Pads. Sweep Or Dust Daily. Vacuum Weekly. Use Wood Floor Cleaner Monthly. Re-Finish Every 3-5 Years.
What maintenance do hardwood floors need?
Routine cleaning involves sweeping, dust mopping, or vacuuming using the bare floor setting to remove dust and dirt. Clean spills immediately with a dry or slightly damp cloth. Don’t use wet mops or steam mops, which will damage the finish and the wood over long periods of time.
What is the best thing to use to clean wood floors?
You can use a commercial wood-cleaning product, like Bona or Murphy Oil Soap. Be sure to follow the manufacturer’s instructions. You can also make your own cleaner by mixing one part vinegar to 10 parts warm water. Add a few drops of liquid Castile soap.
What should you not put on a hardwood floor?
Don’t use straight ammonia, alkaline products or abrasive cleaners. They’ll dull or scratch the finish. Don’t rely on lemon juice or a vinegar-and-water solution to clean hardwood floors. “I don’t recommend using vinegar or lemon juice, at least not in large quantities, as these can damage the floor’s seal,” said Wise.
Are wet swiffers bad for hardwood floors?
You can safely use Swiffer products on hardwood floors. For a quick clean, try Swiffer WetJet Wood Starter Kit. With just the right amount of solution, it breaks up tough, sticky messes, brings out the natural beauty of your floors and won’t damage them.
Is it OK to damp mop hardwood floors?
Do not wet mop wood flooring. Damp is good. Dripping wet is bad. If you can ring out the mop or pad, you’re working with too much water. Excess water will lead to damage of the floor, and even the subfloor.
Should you use Murphy’s Oil Soap on hardwood floors?
To avoid the problem entirely, always wring out the mop tightly before placing the mop on the floor. Get the most out of your Cleaning Time and use products like Murphy® Oil Soap that can get the job done. Whether you’re cleaning one area or all of your flooring, Murphy® Oil Soap is safe to use on hardwood floors.
Is Murphy’s oil soap good for wood?
Murphy® Oil Soap gets deep into grime to break up dirt particles and it’s safe to use on wood products like cabinets. Avoid using any abrasive cleaning tools like steel wool on the cabinets, which can remove the finish or stain and damage the wood.
Is Murphy’s Oil Soap good?
5.0 out of 5 stars Great product for all of your wood and more! This product is great for cleaning of all of your wood surfaces and products. Has a wonderful light, lemon fragrance and does not leave a soapy residue. Have trusted this product for years, and can say that it is still the same great product!.
Can you steam mop hardwood floors?
Avoid Using a Steam Mop on Wood Although it may be tempting to deep clean your hardwood floors with a steam mop, don’t. “Drastic temperature changes and moisture may warp the wood,” says Steve Stocki, manager of marketing and merchandising at Lumber Liquidators.
Is vinegar bad for hardwood floors?
Using vinegar and water as a homemade hardwood floor cleaning solution can have a negative effect on your hardwood floor. Since vinegar is an acid, it will actually break down the finish on the surface of your floor, and over time it will reduce the shine and leave a dull appearance.
Are bare feet bad for hardwood floors?
Bare feet will cause only minimal marks on wood flooring. For example, moisture and oil from your body can cause problems for a wood floor and its finish layer. Walking barefoot on a wood floor can lead to some issues, but there are worse ways to use your floor, and with the proper care any effect will be minimal.
What is the best natural way to clean hardwood floors?
7 Best Homemade Wood Floor Cleaners Water and Vinegar. Water, Vinegar, and Essential Oils. Vinegar and Vegetable Oil. Plant-based Liquid Soap, Vinegar and Water. Tea Bags. Lemon Juice, Olive Oil and Hot Water. Dish Detergent, Water and Vinegar.
How do you keep hardwood floors dust free?
6 Simple Techniques to Keep Hardwood Floors Dust Free Remove Your Shoes and Keep Dust at the Door. Wipe Away Dust with a Floor Mat. Use Microfiber Dust Mops for a More Efficient Clean. Dump Your Bags and Live Clean. Clean Your Home from Top to Bottom—Literally. Keeping Hardwood Floors Dust Free Means Keeping a Schedule.
How do you tell if your wood floors are sealed?
To tell if your wood floor is sealed, find an inconspicuous area, dab a drop of water on the surface, and see if it soaks in or beads on top. If the water drop beads on top of the wood, your floor is sealed. Surface-sealed floors are stain and water-damage resistant and easiest to clean.
Can I use shark steam mop on hardwood floors?
You should never attempt to unleash the cleaning power of a Shark® steam mop on a hardwood floor unless the entire floor has been sealed. A range of different sealants – including waxes and resins – are used to create a protective barrier against moisture and other contaminants.
How do you deep clean hardwood floors?
If a surface-finished hardwood floor still looks dingy or dull after dusting, deep clean it with any pH-neutral, wax-free, and petroleum-free cleaner, such as Bona PowerPlus Hardwood Floor Deep Cleaner (view on Amazon) or a homemade solution comprising a quarter-cup of dish soap and a gallon of warm water.
Why are my hardwood floors still dirty after mopping?
2 REASONS YOUR FLOORS ARE STILL DIRTY AFTER CLEANING Many cleaners spray a ton of floor soap, believing “wet equals clean”. Continuing to use the mop pad on the floor leads to smearing dirt, not lifting it. The end result, dirty water dries back onto the floor.
