Table of Contents
How to Reset a Health o meter Scale Place the Health-O-Meter scale on a flat surface. Make sure the scale is indeed level. Tap the lower left or right corner of the scale three times. After you do this, you’ll notice the display shows “—.” Wait a few seconds for the scale to reset and recalibrate.
How do I reset my Healthometer digital scale?
To reset a Health o meter digital scale, hold down the lower right edge of the scale until the scale displays “0.0.” A Health o meter scale should be reset whenever it is moved, before each weigh-in and any time the scale displays an error message or reads “E.”.
Are Healthometer scales accurate?
The best thing about the scale besides it’s sleek look, is the fact that it’s extremely accurate. Most spring scales will show you two different weights if you step on it twice in a row, this ones shows the exact weight to the decimal.
Why is my Healthometer scale not working?
The unit may require a fresh battery. Locate the battery cover on bottom of scale, open it, and insert appropriate battery or batteries. If the scale has been dropped, it could be the cause of the problem. Gently tap lower right corner or middle of scale platform with a foot.
Is there a way to calibrate a digital scale?
Set the scale on a flat, level surface and turn it on. Wait a few moments for the scale to stabilize its readings. Locate the calibration switch (some scales require a sequence of numbers on the control panel) and activate the calibration mode. Place the quarter on the center of the scale and check the reading.
How do you calibrate a scale?
Calibrating Your Scale Power on the scale and allow it to warm up (usually 30 seconds) Begin the calibration mode sequence. Follow the instructions on the scale’s display. Once the calibration process has been completed, remove the calibration weight and return to normal weighing modes.
Why does my Health o meter scale give me different weights?
Health O Meter makes a variety of scales for home use, allowing you to keep track of your weight. The most common issues that come up are related to the scale’s calibration as well as battery issues. If all else fails, contact Health O Meter customer support at 800-815-6615.
How much weight can a Health o meter scale hold?
Health o meter Digital Bathroom Scale, 350 lbs Capacity.
What does e mean on Health o meter scale?
E. If the device is showing the error “E” on the message screen, check to make sure that you are not moving while calculating the weight. If after this the error message hasn’t gone away, there may be bad connection on your scale.
How do you calibrate a Health o meter balance beam scale?
The scale calibration can be adjusted by loosening the locking screw at the end of the Long Lever with a 5/16″ hexagon socket wrench. Once this screw is loose you can slide the Nose Iron outward to decrease the indicated weight or slide it inward to increase the indicated weight.
How do I change the battery in my Healthometer scale?
The battery is fairly easy to replace and is available at most electronics stores. Flip the scale over on top of a towel to prevent damaging the glass surface. Push the locking tab and lift the compartment cover. Insert the new battery into the compartment. Push the metal tab over the new battery.
What does e mean on a bathroom scale?
The “e” value is the verification scale interval, which means the smallest scale increment that can be used to determine price by weight in commercial transactions. “e” is the stated accuracy (or certified reliability) of a scale when the scale display has extra units added in order to expand the resolution.
How do you fix a scale that won’t calibrate?
Even if your scale is calibrated, it could show inconsistent readings if it’s resting on an uneven, tilted or rounded surface. Use a mouse pad or static-reducing pad on a flat, hard surface underneath your scale to steady the scale and ensure correct results every time.
How do you calibrate a digital scale without weights?
Make sure that the nickel should be also clean otherwise it will affect your calibration weight. Calibrate – To calibrate a digital pocket scale, you just press the calibration button and place the specific number of nickels on the scale. Normally, the calibration takes place when the digital readout will flash.
What can I use as a 200g weight?
Many items can amount to 200 grams, such as a roll of nickels and a cup of granulated white sugar. Other items of that weight include three C-cell batteries and an adult hamster. However, there are plenty of other everyday things that all weigh the same amount.
How do I reset my weight scale?
Remove all batteries from the back of your scale. Leave the scale without its batteries for at least 10 minutes. Make sure that the battery compartment is clean, and the contact terminals are free of debris or residue. Check that the batteries have the correct polarity and reinsert them firmly in place.
How do I fix my digital scale?
You need to reset your scale using the instructions below; Remove the batteries. Leave the scale for about 10 minutes after removing the batteries. Re-insert the batteries and confirm the polarity is good. Place your digital scale on a flat surface, and confirm the feet are clear of any dirt or rust particles.
What is a 100g calibration weight?
Product Details. This OIML Class M2 100 gram calibration weight has an accuracy of +/- 16 milligrams (0.016 grams). Use this calibration weight alone, or combine it with more weights to accurately calibrate your digital weighing scale.
How do you know if your scale is wrong?
Inconsistent Scale Readings: You should see the scale register the same weight each time, then return to the “000” display when the object is removed. If the scale registers anything other than 10 pounds, or doesn’t return to zero, this may mean it’s having mechanical problems or load cell problems.
