Table of Contents
Length in feet x Width in feet x Depth in feet (inches divided by 12). Take the total and divide by 21.6 (the amount of cubic feet in a ton). The final figure will be the estimated amount of tons required.
How do I calculate tonnage?
tonnage, in shipping, the total number of tons registered or carried or the total carrying capacity. Gross tonnage is calculated from the formula GT = K1V, where V is the volume of a ship’s enclosed spaces in cubic metres and K1 is a constant calculated by K1 = 0.2 + 0.02 log10 V.
How do I calculate how much gravel I need?
Measure the length and width of the area in feet and multiply the figures together. Multiply your area figure by the depth of gravel that you wish to use, ensuring your measurement is also in feet. If your depth is in inches, divide it by 12 first. You now have a cubic feet volume figure.
How do you calculate aggregate tonnage?
Manual Calculator Multiply the length of the area by the width of the area = Square Feet. Multiply Square Feet by the Depth* = Cubic Feet. Divide Cubic Feet by 27 = Cubic Yards. Multiply Cubic Yards by 1.5 = Tons Needed.
How do you calculate tons of gravel for a driveway?
Gravel is sometimes sold by the ton instead of the cubic yard. If you know how many cubic yards of gravel are needed then find the number of tons needed by multiplying the cubic yards by 1.35.
What area does a ton of gravel cover?
Type 3 Aggregate Calculator Un-compacted Cloburn aggregates weigh 1.4 tonnes per cubic metre. Therefore if you wish to apply them at a 50mm depth (the normal depth for a driveway) one tonne will cover 14 square metres.
How is boat tonnage calculated?
How to calculate gross tonnage of recreational vessels? For a boat with a simple sailing hull: Gross Tonnage = (. 5 x L x B x D) divided by 100. For a sailing boat with keel: Gross Tonnage = (. 375 x L x B x D) divided by 100. For power boats: Gross Tonnage = (. 67 x L x B x D) divided by 100.
How many square feet will 5 tons of gravel cover?
Regarding this, “how much area does 5 tons of gravel cover?, typically, as 1 ton of gravel cover around 108 sq ft area for 2 inch depth, so 5 tons of gravel = 108 × 5 = 540 sf coverage, therefore 5 tons of gravel can cover around 540 square feet or 60 square yards or 50 square meters area for standard 2 inch depth.
How many yards is a ton of #57 gravel?
Calculate #57 Limestone Gravel Coverage (Square feet) 400 sq ft Volume (Cubic feet) 67 cu ft Volume (Cubic yards) 2.5 cu yd Estimated amount (Pounds) 5,951 lb Estimated amount (Tons) 2.98 ton.
How deep should my gravel be?
Gravel 1-1/2” to 2” will need to be 3” deep, and 2” to 4” gravel needs to be 4” deep. This is to provide complete coverage and so you cannot see the landscape fabric (weed-mat) through the gaps in the gravel.
How many tonnes are in a cubic Metre of crushed rock?
General Weights Solid rock is estimated at 2.5 to 3tons per cubic meter. If rock is crushed into uniform sizes, the presence of open space between the particles causes the load to be lighter — approximately 1.6 tons per cubic meter. Mixed sizes of crushed rock can range from 1.6 to 2.2 tons per cubic meter.
How many tons is a stone?
Weight of Gravel and Other Landscaping Materials Material Weight per Cubic Yard Pounds Tons Rock (2″ – 6″) 3,000 – 3,400 lbs 1.5 – 1.7 tons Sand (wet) 3,000 – 3,400 lbs 1.5 – 1.7 tons Sand (dry) 2,600 – 3,000 lbs 1.3 – 1.5 tons.
How many cubic feet are in a ton of gravel?
How much is a ton of gravel? A ton of gravel with average-sized pebbles is about 0.705 cubic yards, or 19 cubic feet, assuming it has been screened for debris and contains no leftover dirt, sand, etc.
How many inches deep should a gravel driveway be?
A standard driveway is between 12 and 18 inches deep. Each of these gravel layers is a minimum of four inches deep, and some folks recommend making each layer as much as six inches. If you have a large area to dig out for your new driveway, the idea of a shovel and wheelbarrow may not be very appealing at this point.
How do I calculate driveway rocks?
To measure the driveway in cubic feet, multiply the length by width by depth. For cubic yards, divide the total cubic feet by 27. Because one cubic yard of gravel is equal to 1.13 tons, you can multiply your total cubic yards by 1.13 to convert this measurement to tons.
How many square feet will 20 tons of gravel cover?
How many square feet will 20 tons of gravel cover:- typically, as 1 ton of gravel cover around 108 sq ft area for 2 inch depth, so 20 tons of gravel = 108 × 20 = 2160 sq ft coverage, therefore 20 tons of gravel can cover around 2160 square feet or 240 square yards or 200 square meters area for standard 2 inch depth.
What size is #57 gravel?
Stones in AASHTO #57 blend are detected with a 1.5-inch sieve, which is why the #57 stone size is around 1 to 1.5 inches. Its size makes it useful for weight-bearing applications such as foundation beds and driveways.
How much gravel is in a dump truck?
How many yards of gravel in a dump truck:- a standard sized dump truck is always recommended for your project. It can carry about 15 to 16.5 cubic yards of 3/4″ or pea gravel per truckload. Thus, a dump truck can have capacity to hold 15 to 16.5 cubic yard of gravel per truckload.
How much does 1 cubic yard of gravel weigh?
One cubic yard of gravel can weigh between 2,400 to 2,900 lbs. Or up to one and a half tons approximately. Generally, a cubic yard of gravel provides enough material to cover a 100-square-foot area with 3 inches of gravel. Keep in mind that some materials compact more than others, so exact coverage may vary.
