Table of Contents
How do I know my vape juice ratio?
The mix of an E Liquid refers to the ratio of VG (Vegetable Glycerine) and PG (Propylene Glycol) content. For example, a 50/50 E Liquid will contain an even mixture of 50% PG and 50% VG, whereas a 70/30 E Liquid will have 70% VG / 30% PG Mix.
How do I use my e juice calculator?
How to use the eliquid calculator Enter the desired final volume in the first box (default 10ml) Enter the desired nicotine strength (default 3mg) Enter the desired percentage of VG (default 70%) Enter the desired percentage of VG (default 70%, the PG% will be dictated by the VG%).
How much 18mg nicotine makes 3mg 100ml?
100ml short fill – add two 10ml 18mg nic shots to take it up to 3mg.
How much nicotine do I add to 50ml juice?
Add 1/4 of an 18mg nicotine shot. 50ml shortfill: Add 1/2 of an 18mg nicotine shot.
What’s the difference between 50 50 and 70 30 vape juice?
For example, an e-liquid with a VG:PG of 50:50 will be 50% vegetable glycerine and 50% propylene glycol. An e-liquid with a VG:PG of 70:30 will contain 70% vegetable glycerine and 30% propylene glycol.
What is a 50/50 e-liquid?
In short, 50/50 e-liquid is vape juice with a balanced 50% ratio of the main e liquid ingredients; propylene glycol and vegetable glycerin. These ingredients are otherwise known as PG & VG and are important in helping you choose the right type of e-liquid for your vape kit or vape tank.
How do you calculate nicotine in e juice?
If you need to work out the total amount of nicotine in a bottle or in a tank, just multiply the strength in mg/mL by the number of milliliters of it you have. For example, if you fill up a 5 mL vape tank with 6 mg/mL e-liquid, you have 5 mL × 6 mg/mL = 30 mg of nicotine in your tank.
How much nicotine do I put in my vape juice?
Nicotine Chart You will need to first remove the same amount of juice from your flavour bottle, and then replace it with the nicotine. Here are some examples: If you have a 60ml bottle and you want a nicotine strength of 6mg, first remove 3.6ml of flavour from the bottle and then replace it with 3.6ml of nicotine base.
How much juice does a 30ml concentrate make?
Most of our one-shots are designed to be mixed at 20-25% which means that with 30ml you’ll be able to produce 120-150ml of juice.
How many NIC shots does it take to make 3mg?
100ml shortfil + 2 x 10ml nic shots = 120ml of 3mg e-liquid.
What is the equivalent of 3mg nicotine?
A 12mg e-liquid is the same as 1.2% – this would contain 12mg of nicotine per millilitre of liquid. 1.2% of the liquid is nicotine. A 3mg e-liquid is the same as 0.3% A 20mg e-liquid is the same as 2%.
How much nicotine is 3mg ml?
This number relates to how many milligrams of nicotine there is per millilitre of e-liquid. Essentially – the lower the number, the less nicotine there is. Sometimes it’s written in a percentage format too – for example a 3mg/ml is 0.3% nicotine.
What percentage is 50 Nic?
50mg/ml juice is equivalent to 5% juice. You move the decimal one place to the left.
Is 50 mg nicotine a lot?
How Much Is Too Much? The CDC says 50 to 60 milligrams of nicotine is a deadly dose for an adult who weighs about 150 pounds. But some research suggests a lethal amount may be a lot higher. It’s not likely you’ll overdose on nicotine just from smoking cigarettes.
Is 70/30 Good for pod systems?
We are often asked which VG/PG ratio is the best for our e-liquids! The short answer: We recommend 70VG/30PG for all tanks and 50VG/50PG for pod systems!Jun 8, 2020.
What’s the difference between 50 50 and 80/20 vape juice?
A lot of e-liquids come in either a 70/30, or an 80/20 mix. However these liquids will come with a higher price, as does everything that is high quality. 50/50 flavour is a very common ratio, and will most often be found in the cheaper more basic flavours.
Can you use 50/50 in a sub ohm tank?
I’ve often been asked if you can use 50:50 e-liquids in a sub-ohm vape tank. If you are using a tank designed for clouds, with low resistance coils and high power levels, you will probably find that the throat hit is too harsh. However, you can use 50:50 e-liquids in a sub-ohm tank if you really lower the wattage.
Does 50 50 vape juice have nicotine?
The 50% PG and 50% VG formulation creates a perfect liquid base in which to blend flavouring and nicotine, resulting in a beautiful balance of clouds, nicotine hit and satisfying flavour.
What’s the difference between Nic salt and 50 50?
Basically, a 20mg nic salt feel more gentle to vape (as well as hitting faster) while an 18mg freebase nicotine 50:50 will feel a lot more scratchy. So, if you want a high strengthand a strong throat hit, we’d recommend 50:50s for you.
What wattage should I vape 50 50?
The sweet spot for getting a balance of vapour and flavour is around 0.3ohms. Depending on your coil choice you’ll want to up the wattage from anywhere between 50 and 100 watts. Clapton and Alien coils usually take a bit more power to ramp up so you’ll want to boost the wattage if you’re using either of these options.
What is 5.0 nicotine in MG?
JUUL Labs reports each 5% (nicotine-by-weight) cartridge contains approximately 40 mg nicotine per pod and is ‘approximately equivalent to about 1 pack of cigarettes.
How much nicotine is in 10ml of e-liquid?
A 10ml bottle of e-liquid that is 10mg/ml or 1.0% has 100mg of nicotine in total. Or 1% of the entire contents of the 10ml bottle is nicotine. The lower the mg/ml or percentage, the less nicotine is contained in the e-liquid. So, an 18mg or 1.8% is much stronger than a 3mg or 0.3%.
