Table of Contents
Length in feet x Width in feet x Depth in feet (inches divided by 12). Take the total and divide by 27 (the amount of cubic feet in a yard). The final figure will be the estimated amount of cubic yards required.
How do I calculate how much dirt I need?
To estimate soil volume for any area, all you need is a tape measure. “The basic formula is simple: Length x Width x Height = Volume,” says Michael Dean, co-founder of Pool Research. Then divide the number of cubic feet by 27. So one cubic yard = 27 cubic feet = 1,728 cubic inches.
How do I calculate cubic yards?
The formula: Number of Cubic Yards = Length (in feet) Width (in feet) Depth (in feet) ÷ 27. Simply multiply the three dimensions together to find the number of cubic feet, then divide by 27 to find the number of cubic yards.
How much does a yard of dirt W?
What does a yard of topsoil weigh? According to Grow Your Yard, a cubic yard of topsoil can weigh 1,400 to over 2,000 pounds. The exact answer depends on the soil’s moisture and whether it contains rocks, sand, debris, or other impurities. 40 pounds of topsoil fill about 0.75 cubic feet.
What is a yard of dirt?
For example, if you dig up a flower bed that is 9 feet long, 3 feet wide and 12 inches deep, you will have one cubic yard of dirt. 3 feet equals 1 yard, so 9 feet equals 3 total yards in length. The width of 3 feet equals 1 yard.
How many square feet does a yard of dirt cover?
How Much Does A Yard Cover? A cubic yard of material can be spread to cover 100 square feet (10×10 foot area) at 3 inches of depth. It’s a very helpful ratio because when spreading mulch, a depth of 3 inches is considered ideal.
How many yards of dirt are in a dump truck?
Dump Truck Cubic Yardage – The Basics While there is room for variance, most full-size dump trucks have a capacity of between 10 and 16 cubic yards.
Is 1 yard the same as 1 cubic yard?
Under the United States’ Customary System, 1 yard is equal to 3 feet or 36 inches. And a cubic yard is the volume of material that fits in a space that is 1 yard wide by 1 yard deep by 1 yard high. This is important because quite a few common materials are measured in cubic yards — here are some of them: Concrete.
How much rock do I need to cover an area?
How much landscaping rock do I need? Material Suggested Depth Coverage Area per 1 ton 3”-8” rock 3”-8” 60 square feet 1”-3” rock 1”-3” 80 square feet 3/4”-1” screened gravel 2” 100 square feet 5/8”-1/2” screened gravel 2” 120 square feet.
How much does a cubic yard cover?
1 Cubic Yard Covers Example: One cubic yard spread at a depth of 3 inches covers 108 sq feet.
How many 40lb bags of topsoil are in a yard?
Since 27 cubic ft is a cubic yard, it would take 54 bags to make a yard.
How many yards is 10 tons of dirt?
based on different condition loose and dense, dry and wet, moisture contents, on average a yard of dirt weighs around 2,200 pounds, for 10 yards = 10×2200 = 22000 lbs, as we know 1 short ton equal as 2000 lbs, in this regard, “how much does 10 yards of dirt weigh”, in general 10 yards of dirt weighs around 22000 lbs or.
How much is a yard of dirt cost near me?
Cost to Deliver Landscaping Fill Material Cost per Cubic Yard Delivery Topsoil $12 – $55 $15 – $150 Dirt $5 – $15 $150 for 10 – 13 cubic yards Sand $15 – $20 $50 – $150 Mulch $15 – $65 $150 for 10 – 13 cubic yards.
How many wheelbarrows are in a yard of dirt?
Depending upon your wheelbarrow size (i.e. 2 or 3 cubic feet per wheelbarrow load), it will take 9 to 14 full loads to equal 1 cubic yard.
What size is a cubic yard of dirt?
A yard is 3 feet or 36 inches, and therefore, a cubic yard is 3 x 3 x 3, or 27 cubic feet(ft3). It doesn’t seem very complicated at first, but when you start considering the following, it just might get a little tricky: For landscaping projects, we often need to measure depth by inches only, not feet.
How much dirt does it take to raise 1 acre of 1 foot?
So, if you dig 1 foot deep over an acre, you get 43,560 cubic feet of dirt. If you dig 5 feet deep, then you have 5 times this amount of dirt. If you dig 5 feet of dirt out of 50 acres, then you have 50 times as much dirt as if you did that over 1 acre.
How much dirt will a cubic yard cover?
One cubic yard of soil covers 100 square feet at a 2 inch depth.
How many bags of soil do I need for a 4×8 raised bed?
For a 4×8 raised garden bed, you will need 15 bags of soil (1.5 cubic feet per bag) or 21.44 cubic feet of soil. This is assuming your raised garden bed is 8 inches high and the bags of soil you are buying contains 1.5 cubic feet of soil per bag.
How much dirt can a 1/2 ton pickup carry?
The volume of a pickup bed is far more than what the half ton could hold if filled with dirt. Common dirt will average about 2200 lbs a cubic yard. So the truck can typically handle a little less than half a yard. People will often put a full yard in a half ton truck.
How many yards of dirt does a Triaxle hold?
When you have more materials to transport, consider a 16-18 ft. Load King tri axle dump truck. With a standard length of 16′-18′, this dump body handles sand to large aggregates, riprap and asphalt and has the capacity from 16 to 19 cubic yards.
How many cubic yards is a 6 foot truck bed?
Short-bed Pickup Truck The bed of a standard short-bed pickup has dimensions of: 6′ long X 4.5′ wide X 1.5′ high. When loaded level full, a truck of this size will hold 1.5 cubic yards of material.
