Table of Contents
Measure the height of your window opening in three places: left, center, and right. Use the smallest measurement if you’re measuring for sheer shades, vertical blinds, solar shades, or roller shades. For all other blinds and shades, use the longest measurement. Order at the exact opening size with no deductions.
How do I know what size blinds to buy?
Measure exact width where the blind is to be placed. Add at least 3 inches for overlap (1-1/2″ per side) for optimum light control and privacy. Measure exact height from the top of the proposed headrail location to the base of the sill. If there is no sill, measure to where the blind is to reach.
Do blinds have to fit exactly?
Shades and blinds must fit precisely to a window’s measurements only if they are installed inside the window frame or opening. If the shades are installed outside of the window opening — called an outside mount — the shades typically are wider than the window by a few inches and can also be longer than the window.
What size blinds do I need for a 35 inch window?
The actual width of the 35″ blinds are 34.5″ (half inch narrower) to comfortably fit inside a 35″ opening. So if your frame is exactly 34.5 inches, I would go with the 35″ blinds.
How much smaller should blinds be than the window?
Record the height of the window accurately, including any brackets or moldings you may have. Add three inches to the measurement to ensure sufficient mounting space. Deduct half an inch from the blind’s height when it extends beyond the frame. Need Mini Blinds?Jun 25, 2021.
What is the standard blind size?
If you’ve ever wondered what the standard size of window blinds is, the standard window length ranges from 36 to 72 inches, and the standard width ranges from 24 to 60 inches.
Do you buy blinds bigger or smaller?
Because you’re mounting the blinds outside the window on the wall above, they need to be slightly wider and taller than the opening. We recommend going at least 2″ wider than the opening on either side, so 4″ total.
Should blinds touch window sill?
Generally, blinds are usually fitted within a window recess and are fitting so that they touch or sit just above the window sill.
Are blinds supposed to cover trim?
While inside-mounted blinds provide good coverage, some gaps may remain on the side of the blinds as the blinds don’t cover the window trim. Outside-mounted blinds provide better coverage as they cover the entire window frame and thereby, the chances of any gaps existing on the sides become very low.
Does Home Depot cut blinds length?
Once you have properly measured, bring your measurements in to the store. Our associates can cut your in-store bought blinds to the exact size needed, for free.
How wide should outside mount blinds be?
Outside Mount To minimize light leakage and ensure privacy the blind should overlap the window opening by 4″ on each side for a total of 8″ on entire width.
How much gap do you need for window blinds?
Blinds.com recommends at least 1.5″ of overlap on each side of the window for blinds and shades, and 2″ of overlap on each side for solar or roller shades and vertical blinds. The extra width provides more privacy and light blockage. As always, record your measurements down to the nearest 1/8 inch.
What do you do when your blinds are too short?
Mounting Window Blinds That Are Too Short A few options to cover this gap is by adding a larger custom valance, a cornice, or drapery above the blinds. If you are handy you could even mount wooden valance boards at the top and paint or stain them to match the horizontal blinds.
How do you install blinds that are too narrow?
Here are some simple installation steps to follow: Position Headrail. Place blind centered in the window with the brackets and mark with a pencil on the top of the window sill on each side of the blinds headrail. Installing the mounting brackets. Install blinds. Install the valance.
How wide can a single blind be?
As you measure your windows, you may find a window opening or two that are very large widths. Payless Decor blinds and shades have maximum widths that can be six, seven, or eight feet or longer, and thus can cover many large openings. Aug 6, 2012.
Is it okay for blinds to be too long?
It’s simpler than it looks to shorten blinds. Horizontal blinds that are too long look bad, but also create a serious safety hazard for young children. Fortunately, shortening them is easy—all you need are scissors and a screwdriver.
Should blinds be flush with wall?
1) Mounting flush with the wall gives a cleaner look, as it hides the depth of the window sill itself and gives a smooth surface against your wall. We recommend this in most cases if you are mostly concerned with aesthetics.
Are blinds better inside or outside recess?
Why fit outside of the recess? The main advantages of hanging your blinds outside of the recess are that more light will enter the room when the blinds are open. You can block out more light when the blinds are closed. However, any items that you have placed on the windowsill won’t be visible when you close the blinds.
What is the best blind slat size?
You don’t want to go too small, or you’ll risk a chaotic, busy appearance. Stick with 2-2 ½ inches for the slat size. Because large windows require more blinds, you’ll want to choose your blind material wisely so they don’t end up being too heavy.
What is Zebra blinds?
Zebra Shades are a very modern alternative to a horizontal blind. Zebra Shades are Roller shades that allow you to transition between sheer and privacy. The blinds can be adjusted so that the 3″ zebra stripes line up-offering privacy, light control, and insulation.
Can you put blinds on window frame?
Inside mounted blinds and shades will give you the cleanest look. That is because they fit inside the window frame, and can be mounted as deep or as shallow as you like. You just mount the brackets outside of the window frame and hang your blinds or shades so they extend past the frame.
What is a blind Valance?
A window valance (or pelmet in the UK) is a form of window treatment that covers the uppermost part of the window and can be hung alone or paired with other window blinds, or curtains. Valances are a popular decorative choice in concealing drapery hardware.
