Table of Contents
How to Build a Bookshelf in 8 Steps Step 1: Cut the Legs, Shelves, and Supports. Photo by Kolin Smith. Step 2: Attach the Supports to the Legs. Step 3: Assemble the Box. Step 4: Level the Bookcase. Step 5: Plumb the Bookshelf. Step 6: Attach the Kick Board. Step 7: Scribe the Trim to Fit. Step 8: Apply Nosing to Shelf Faces.
Is it cheaper to build your own shelves?
The pros of DIY shelving include: Lower Cost – Generally, buying the materials for your garage shelves should be cheaper than purchasing prefab – just make sure you do everything right the first time. Durability – As long as you choose quality materials and a solid design, your DIY shelves will be more durable.
How much do bookshelves cost to build?
The cost to have built-in bookshelves installed averages $2,676 or between $1,275 and $4,091 for a carpenter to do the job. If you buy the materials yourself, you can usually get a handyman to install them for $30 to $130 per hour. For high end custom work, expect to spend $150 to $1,200 per linear foot.
How much does it cost to build your own shelf?
Built-In Shelves Cost Cost to Add Built-In Bookshelves National average cost $3,000 Average range $1,500-$4,000 Minimum cost $800 Maximum cost $5,000.
How thick should Wood be for shelves?
Use 3/4-inch thick materials for shelves and bookcase structure. If you’re using hardwood solids, it’s OK to boost the thickness to 1 1/4 inch for almost unlimited support. This type of shelf looks more like a mantel and is expensive, but adds the opulent look of craftsmanship.
Is it hard to build a bookcase?
In-the-wall bookcases are elegant, but they can be difficult and expensive to construct. Basically consisting of three plywood boxes fitted with a hardwood face frame, this piece looks built-in because it spans from wall to wall, and is trimmed with molding at the ceiling and floor. I used 3/4-in.
What wood is used for shelves?
If you are making shelves where the color and grain of the wood is an important part of the design, look for oak, maple, or cherry plywood—these options will still offer durability, but will help keep costs down compared to with non-manufactured hardwoods of the same species.
How deep should bookcases be?
Shelf depth for a general purpose bookshelf is usually 10 to 12 inches. Shelf spacing will generally range from 7 to 15 inches with 8 to 12 inches being common for bookshelves.
What tools do I need to build a bookshelf?
As for basic tools, you’ll need a portable circular saw, hammer, block plane, combination square, tape measure, metal rule, two clamps, nail set and putty knife. Other supplies include glue, nails, sandpaper, wood filler and varnish or paint and shellac.
How much does it cost to build floating shelves?
Approximate Total Cost: $10 The DIY Wood Floating Shelf can be made for about $10 in materials cost. This is the cost for the wood, wood finish, and other basic supplies. *Note: This doesn’t include smaller things you may already have around the shop, including: glue, sandpaper, etc.
How far can a shelf span without support?
Span Limits The span limit is defined as the maximum distance apart that you can place the shelving supports. Glass, particleboard, solid lumber, plywood, and other common shelving materials can have span limits that can range from 18 inches to almost 5 feet.
Is MDF good for bookshelves?
MDF is a good material for making shelves because it’s cheaper than plywood, it’s strong enough to carry light to medium loads, it’s easy to cut to size, has a smooth surface, and paint applies well to it. Additional stiffeners and supports can be added to the MDF shelves to allow for heavier loads.
How much weight can a 2×4 shelf hold?
A 2×4 can hold up to 40 pounds or 300 pounds when laying on its edge without sagging when laying horizontally. Several factors can lower or increase a 2x4s strength, including wood species, lumber grade, and moisture content.
How thick should Plywood be for shelves?
The most common size used in shelving is a 3/4 inch thickness. Cabinetry, furniture, and smaller decorative projects might generally use a combination of 1/2 and 3/4 and occasionally 1/4 inch.
What is the strongest wood for shelves?
Koa. If you want wood shelves that last for a long time, you should consider using Koa wood. This is considered to be the hardest among commercially available wood types. Even so, Koa is lightweight and has beautiful shellac qualities.
Is plywood good for shelves?
Plywood is the industry standard for shelving, so it’s a good choice for bookshelves. However, there are a number of sturdy woods with which you can construct bookshelves.
What timber is best for shelving?
Pine. For short length bookshelves, pine is a good material to work with. If you’re planning on building bookshelves in an alcove or with intermediate support, its strength comes into its own in plank form. Varnishing is recommended.
What size are built in bookshelves?
You can also find classic bookcases in standard sizes of 24 inches wide, 36 inches wide, and 48 inches wide. Standard heights are usually 36 inches, 48 inches, 72 inches, 84 inches, or roughly 90 inches tall. The average depth of a bookshelf is between 11 and 12 inches, though it can be shallower for media storage.
What height should shelves be?
How High Should I Hang My Shelf or Shelves? Like artwork, shelves should be hung at about eye level or about 4 to 5 feet from the floor. If you’re hanging the shelf above furniture, measure about 10 inches from the top of the desk or couch.
How do you measure a shelf for a bookshelf?
How to Measure for Bookshelves Measure the height of the wall on which or against which you plan to put bookshelves. Measure the horizontal width of the wall space for the bookshelves. Determine how far you want the bookshelves to extend into the room, and measure that distance outward from the wall.
