Table of Contents
Can I build my own Trex deck?
Build Your Own Deck Trex® engineered composite decking to be as simple to install as it is to care for. And to make it even easier, we’ve compiled all the resources you need to build a DIY deck.
How far apart do deck joists need to be for Trex?
The majority of composite deck board brands including Trex, TimberTech, and more require deck joists spacing to be at 16 inches O.C. (on center) for standard straight composite decking installation.
Is it hard to install Trex decking?
It’s not hard to install. With Trex Decking’s simple to install clip system, even amateurs can effectively install a new deck. Trex even provides simple how-to guides for those who want to make their deck a DIY project.
What tools do I need to build a Trex deck?
7 Must-Have Tools to Build A Deck Circular Saw. This will probably be the tool you use the most when building a deck. Hand Saw. Chalk Line. Tape Measure. Carpenter’s Level. Power Drill.
How much overhang should a Trex deck have?
Trex is a popular composite material with a maximum overhang of 102mm or around 4 inches. Between one and two inches of deck board overhang is ideal when you attach an outer fascia board, or at least 1 ¾” to 2 ¾” of overhang before installing the fascia.
How many Trex boards do I need for a 12×12 deck?
(Choose from 8, 12, 16, or 20 ft board lengths. Choose which board best fits the dimensions of the deck.Decking Materials. Board length Boards required 8 FT 206 12 FT 137 16 FT 103 20 FT 83.
How do you finish the edges of Trex decking?
Composite decking ends can be finished by picture framing, raised fascia board, painting the ends, attaching decking veneer, composite nosing strips, vinyl stair nosing cove, composite corner trim or plastic end caps.
Can Trex be installed on 16 inch centers?
Most composite and PVC decking brands, like Trex and Azek, recommend a maximum joist spacing of 16 inches OC. Some brands, like WearDeck, let you get away with more – reinforced with a layer of fiberglass on both the top and bottom, WearDeck boards easily allow for spans of 24 inches OC.
Are 2×6 strong enough for deck joists?
2×6 joists should only be used on ground-level decks that do not require, and will not provide for, any guards. Most decks use 16″ on center spacing for joists. Most decking is not strong enough to support longer spans than 16″.
Do you gap Trex decking?
All deck boards must always be installed with a 6mm side-to-side gap. The Trex Hideaway Hidden Fasteners automatically measure the 6mm gap between grooved edge boards but you must still ensure the 6mm gap with the square edge boards.
Is Trex decking worth the money?
Yes, worth it! Yes, composite materials on decking and trim are worth the money. The labor to install composite is the same as the labor to install wood, which will rot and require a lot of maintenance. For example, the labor to replace a deck with Trex or wood might both be $4000.
Is Trex hot on your feet?
Composite decking is hot on bare feet in direct sun, but some composite decking boards are cooler on your feet even in the sun. The temperature of your decking is critical in summer. If the decking is too hot to walk on, you cannot enjoy being outside on your deck in summer, leaving your shoes inside.
Can Trex decking warp?
Trex decking resists termites, won’t rot, warp, or splinter-and never needs staining or painting. What’s more, Trex decking is made from 95% recycled materials: That’s an eco-friendly decking choice you can feel great about.
What is a floating deck?
A floating deck, also called a free standing deck, is simply a deck that’s not attached to any structure, including (of course) your house. Instead, you can put your deck’s structural members — posts, girders, and joists — on precast pier blocks set directly in the ground.
How much does it cost to install Trex decking?
The cost to install Trex ranges from $5 to $15 per square foot. For complete installations that include rails, stairs and framing, expect to spend anywhere from $15 to $35 per square foot for labor, permits and other installation costs.
What is the cheapest Trex decking?
Trex Select is their most affordable line of decking.
How far can a 5 4 deck board overhang?
The edge of decking should never overhang more than one-third of the decking material. For your standard 5.5” decking, that is 1 ¾” overhang.
How wide should the gap be between decking boards?
Proper Gap between Decking Boards When installing decking boards, make sure to leave 1/4 to 1/8 inch gaps in between them. This gap will make sure that the deck can breathe, have sufficient drainage, and make it easier to clean. For the gaps, you can use different tools to help you.
Should deck stairs have a Lip?
This is a measurement from the nose of the tread to nose of the tread. You are not required to have a nosing/overhang on your stair treads. But if your stairs don’t have a nosing you are required to have a tread that is at least 11 inches long.
How much should a 20×20 deck cost?
New Deck Installation Cost The average homeowner spends $2,200 to build a 10×10 foot deck, $6,160 to build a 14×20 deck, and $8,800 to build a 20×20 deck. The cost to build a deck with pressure-treated wood, hardwood, or composite is about $25 per square foot, for both materials and installation.
What are the lengths of Trex decking?
Available in 12′, 16′ and 20′ lengths.
How many sq ft is 10×10?
How many square feet is a 10×10 room? The square footage of a room 10 feet wide by 10 feet long is 100 square feet. Find the square footage by multiplying the width (10 ft) by the length (10 ft).
Should you seal the ends of composite decking?
Kim Katwijk The cut ends of composite decking will absorb moisture and can swell, as shown here. Sealing the end cuts with lumber wax will help prevent swelling. Because the uncapped ends of the boards are free to pick up water, the core can absorb moisture, which can lead to all sorts of problems.
