Table of Contents
What goes on first soffit or fascia?
Fascia and soffit are installed after the roof installation is finished. It is ideal that soffit and fascia materials be installed before you place tiles or any other type of roofing material on the roof. There are different types of finished and variations that can be used for the soffit.
Can I use 2×4 for fascia?
Install 1×6-80″ fascia boards to the 2×4 trusses. Install the fascia so the bottom edge of the roof sheathing will rest on the beveled edge. Install 22-1/2″ long 2x4s between the trusses to support the fascia boards where they butt.
Can I use plywood for soffit?
plywood are often used for soffits, optimum appearance and finish performance is achieved by using panels with Medium Density Overlay (MDO), or textured (such as APA 303 Siding) or sanded A-grade faces.
How wide should fascia be?
Fascias are typically made from 1-inch material, with the width being enough to cover the rafter width. Typically rafters will range from 2×6 to 2×8, although some are larger depending on the roof construction. Therefore, the more common fascia board sizes are 1×6 or 1×8.
What is a soffit board?
Soffit boards are the horizontal boards which fit under the roofline which together with fascia boards or capping boards finish off the roofline in a weatherproof seal. They are available in 3 different styles, standard utility board, vented soffit boards or lightweight hollow soffit boards.
How tall should a soffit be?
Standard Ceiling Space Soffit space should begin 84 inches off the kitchen floor. This means that a typical soffit for an 8-foot tall kitchen will be 12 inches high. But, you will still need to ensure this size space works well for your kitchen. The standard size is only a general starting point.
What is the difference between eaves and soffits?
Eaves are usually made of wood and then covered with roofing material. Soffit materials coordinate with siding and fascia boards on the exterior walls, and generally follow the aesthetics of the residence.
What wood is used for soffits?
Standard soffit material is 3/8- or 1/2-inch-thick exterior plywood in pine (or similar softwoods) or cedar. Common, but much less durable, is Masonite or similar fiberboard soffit, as well as much more weather-resistant fiber-cement.
How long does it take to install soffit and fascia?
Working alone, you can clad the soffits and fascias on a 1,200-sq. -ft. house in about five days. Get a volunteer to cut and hand you up materials and you’ll really move along.
What is difference between soffit and fascia?
An exterior soffit is located on the span beneath the rafter tails, while the fascia is the exposed horizontal band you see at the end of the rafters. These architectural elements found along the eave area do more than just add visual interest and give a finished look to your home.
Does fascia board go under roof sheathing?
Measure up the rafter 45-3/4 inch from the cut end of the truss tail and snap a line along the trusses. This indicates the upper edge of the first row of roof sheathing—leaving enough overhang that the subfascia and fascia will tuck neatly underneath when the time comes.
Can you use 2×6 for fascia?
Around here everyone uses 2×6 fascia and then covers it with aluminum fascia. If you are leaving the fascia as wood to be painted then the finished face board is better to wider. So you could use 2×4 frame work and 5/4 or 1×6 fascia boards.
What boards are used for fascia?
Typically for fascia boards, cedar and redwood are popular choices given their resistance to rot from excessive moisture. However, if you prime and paint the fascia, then fir, spruce, and pine can also make beautiful choices from a design standpoint.
What is Subfascia?
The sub-fascia (or rough-fascia) is part of the framing. It supports the roof sheathing at the eaves, and provides backing for the gutters. That said, many older houses, or those with exposed rafter tails, don’t have a rough fascia.
How thick is a soffit board?
While not all soffit board sizes are the same, the width of most soffit falls in the range of 16 inches to 24 inches when used to cover the eaves of the home. In addition, standard soffit sizes feature a ¼-inch thickness, too, which can help with installation.
What is the best plywood for soffit?
Finishing. Although unsanded and touch-sanded grades of plywood are often used for soffits, optimum appearance and finish performance is achieved by using panels with Medium Density Overlay (MDO), or textured (such as APA 303 Siding) or sanded A-grade faces.
What can I use for soffit board?
Soffit Material Options Wood. Wood is one of the oldest materials used for soffits, and like wood siding is still around today. Vinyl. Vinyl soffits are another option that emerged along with vinyl siding in the 1950s. Aluminum. Fiber Cement.
