Table of Contents
At what height do you need scaffolding?
In the general industry, the height requirement for scaffolding is 4 feet above a lower level. For construction work, the height requirement is 6 feet above a lower level. All workers 10 feet above a lower level must have fall protection.
What is a tower scaffold?
A tower scaffold is one way to prevent a fall when working at height. The type of tower selected must be suitable for the work and erected and dismantled by people who have been trained and are competent to do so. Key issues with tower scaffolds are: Erection and dismantling. Stability.
What can I use instead of scaffolding?
Working at Height? 4 Alternatives to Scaffolding Access tower. Similar in its appearance to a prefabricated scaffold, an access tower gives you the same capabilities without the installation. Scissor lift. Ladder. Access platform.
Can I erect my own scaffolding?
Do I need to be insured to use scaffolding? Due to the need for working at height, there are a variety of safety issues at play. That includes injury to those working on the site as well as items which may fall on the public from a height. You should never have to erect the scaffolding yourself.
Can you use plywood on scaffolding?
Answer: It is permissible, under certain conditions, to use plywood as platform decking material. OSHA’s construction industry standards addressing scaffolds are in 29 CFR Part 1926, Subpart L. Platforms can be constructed using individual wood planks, fabricated planks, fabricated decks, and fabricated platforms.
How do you build scaffolding on uneven ground?
Setting Up Scaffolding on Uneven Ground Set a 2×10 block of wood under each leg, even when using a base plate. This will help prevent sinking into soft soils or hot asphalt. Setting the scaffold on blocks when working on concrete isn’t necessary, but it’s still a good idea.
What is wooden scaffolding?
Wood Scaffolds – A supported scaffold consisting of a platform supported by brackets attached to a building or structural walls. Metal Scaffolds – Horse Scaffolds – A supported scaffold consisting of a platform supported by construction horses (sawhorses).
What is a cantilever scaffold?
Cantilevered scaffolding is a form of scaffolding that is usually used to overcome obstacles that prevent a scaffolding tower being erected, or reduce the chances or damage occurring to the structure beneath the cantilevered area.
What is a birdcage scaffold?
Birdcage scaffolds are typically used in buildings where access is required, at high levels, for example ceilings. The birdcage is an independent scaffold consisting of more than two rows of standards in both directions connected by ledger beams at every lift height.
Do you need permission to put up scaffolding?
If your builder or scaffolder needs to put up scaffolding within the boundary of your property there is no need for a licence. However, if any part of the scaffolding needs to go on the pavement or the road outside your property your builder or scaffolder must get a licence from your local council.
Can anyone build a scaffold?
Yes. All scaffold systems must be designed by a qualified person in accordance with the provisions in §1926.451 (General Requirements) and §1926.452 (additional requirements applicable to specific types of scaffolds) and constructed and loaded in accordance with those designs.
How far can a scaffold be from a wall?
SCAFFOLDING INSPECTION CHECKLIST Ensure that the platform is 14 inches or less away from the wall or 18 inches or less away if plastering/stuccoing. Make sure there are guardrails, including mid rails and toe boards on platforms where work is being done.
Are DIY scaffold towers safe?
On a similar note, scaffold towers have their safe work load just like ladders do, so be careful not to exceed this. Taking more people, equipment or material onto the ladder than it’s explicitly designed to support can obviously open you up to severe risk – though thankfully, it’s one that most people manage to avoid.
Can anyone use a mobile scaffold tower?
The Work at Height Regulations requires all persons working at height to be competent using the relevant equipment and they must be able to prove their competency.
How high can you build a scaffold tower?
A mobile access tower (or ‘zip up’ tower) provides a free standing, stable working platform up to a maximum height of around 10-12m.
What is the best lumber suited to make a scaffolding?
Wood, such as fir or pine, is the most common material. High-quality wooden planks, such as Kennison Forest Products solid sawn scaffold planks or sure-lam LVL (laminated veneer lumber) scaffold planks, provide durable, safe planking solutions.
What are the components of scaffolding?
List of Scaffolding Components: Standards. Ledgers. Transoms. Scaffold Tubes. Scaffold Couplers. Adjustable Base Plates. Diagonal Braces. Toe Boards.
What are the 3 types of scaffolds?
Workers who use scaffolds can be divided into three groups: Suspended Scaffolds. Supported Scaffolds. Aerial Lifts.
What is a ladder jack?
A ladder jack scaffold is a system designed to perform activities, such as: installing building exteriors, trim, and finishes. Triangle-shaped brackets called “ladder jacks” are attached to portable ladders, which are used on each side of a ladder jack scaffold to form a means of support for a platform.
