Table of Contents
What is the formula to build steps?
You divide the height by 7 inches; if, say, the floor-to-floor distance is 8 feet, 10 inches (or 106 inches), then you’ll need 15 treads (106 divided by 7 equals 15.14). Next, you divide the height by the number of treads (15 into 106), producing the exact tread height (7.06 inches).
What is the code for outdoor steps?
Exterior Stair Construction The rise of the stairs should be between 125 mm (5”) and 200 mm (8”). This is measured from top of a tread nosing to the top of the next tread nosing or landing. The run should be between 210 mm (8 ¼”) and 355mm (14”). Unit run is measured from face of nosing to face of nosing.
What size lumber is used for stair stringers?
The stair stringers are essentially the backbone of your staircase. Always use straight, high-quality, pressure-treated 2x12s for stair stringers. If you are planning on resting the stringer on the ground, make sure the wood has .
What is the best wood for outdoor steps?
Two types of wood widely considered the best for outdoor building of any kind are redwood and cedar. This is because they are both naturally resistant to weather damage, are easy to work with, and have a reputation for being long lasting wood even when not treated, stained, or painted.
How do I calculate how many steps I need?
Divide the rise by 6 or 7 inches (15 or 18 cm) to find the total number of stairs. For larger stairs, divide by 6 and for smaller stairs, divide by 7. The total you get is how many stairs your future staircase will have so you can plan accordingly.
What is a good rise and run for stairs?
Over the years, carpenters have determined that tread width times riser height should equal somewhere between 72 to 75 inches. On a main stair, the maximum rise should be no more than 8 1/4 inches and the minimum run should be no less than 9 inches.
Do exterior steps require a landing?
All exterior doors shall have a landing immediately on the exterior side. These landings shall be as wide as the door and a minimum of 36 inches in the direction of travel. InspectAPedia ® Question? Just ask us! InspectAPedia Encyclopedia of Building & Environmental Construction, Diagnosis, Maintenance & Repair.
Do you need a railing for 3 steps?
A: Editorial Adviser Mike Guertin replies: Since your stairs will have only three risers, you don’t need to install a handrail. That said, it’s important to count the number of risers accurately.
Is a landing required for exterior stairs?
Outdoor stair landing code 7.6 Landings for stairways. There shall be a floor or landing at the top and bottom of each stairway and the width perpendicular to the direction of travel shall not be less than the flight served.
Can I use 2×12 for stair treads?
It is acceptable and within building code guidelines to use either 2×10 or 2×12 dimensional lumber to create a set of stairs; however, a stair stringer should not be less than 3.5 inches wide at its narrowest point to provide adequate strength for the load the stairs will be supporting.
Can I use 2×10 for stair stringers?
Pressure-treated or cedar 2×10 or 2×12 can be used depending on the depth of the cut-outs you’ll be using. By code you will need a minimum of 3-1/2″ of material left on the stringer after the cut-outs and that area should also be free of large knots which would weaken the stringer.
Do you need pressure treated wood for stairs?
Treated lumber is ideal for projects such as deck stairs, basement steps and steps leading to back porches and outbuildings. Treated lumber is strong and long lasting. It is always a smart choice for ground contact because it resists rot better than most wood products.
Is Cedar better than pressure treated wood?
Cedar is stronger and more durable than pressure-treated lumber. Pressure-treated lumber can warp and weather within a few years if left untreated, while cedar is more capable of naturally keeping its shape.
What type of wood is used for steps?
Oak Stair Treads Oak is a common type of wood for stair treads. It has a lot of positive qualities that make it a good option. Oak matches virtually any home style and is among the most durable of wood species.
Can you buy premade steps?
You definitely can buy premade deck stairs. Whether you’re looking for a large project option or a quick fix, there is an option for you out there. Premade deck stairs can be bought at any place that sells premade stair kits like Paragon Stairs, the same as other stair types.
Can I use 2×4 for deck steps?
Either way, 2x4s as deck joists are safe as long as your design doesn’t span too far or include guard rails or stairs. The other main limitation is the size of your deck. 2x4s are the smallest dimensional option, making them great for low, ground-level decking if they’re spaced no further than 12” on center.
What is the standard step height for stairs?
Riser Heights In the United States, the step height standard should be between 7 or 7 ¾ inches at the most, and no less than 4 inches. You should follow other measurements if given by local building codes. In Canada, the maximum step riser height is 8 ¼ inches.
How do I anchor my deck stairs to the ground?
Attach the stringers to the deck using angle brackets and 3” galvanized deck screws. Cut a 2×6 board to fit snugly between the two stringers at their base. This will be used to fasten the stairs to the concrete pad. Place the board between the stringers and attach to stringers with 3” galvanized deck screws.
