Table of Contents
Is it cheaper to build a log splitter?
As with many of these DIY log splitters, you might have to spend a little cash for the basic components, but when you consider that buying a log splitter can cost upwards of $1,000, constructing a machine such as this is still a very economical alternative.
What size cylinder do I need for a log splitter?
Most people choose a size that allows for a 20 to 30 second overall cycle that allows for enough time to load a log and remove split wood without having to wait. A 24 inch, 4 inch diameter cylinder is a popular choice.
How much force does it take to split wood?
The species of the tree is a strong determinant of the pounds of force needed to split your logs. For example, an Oak tree log requires 1350 pounds of pressure to split, based solely on its level of hardness.
What’s the average price of a log splitter?
The lowest price is for a hydraulic log splitter that will cost you just $649.99, while their most expensive product is a high-end Deluxe hydraulic splitter that costs $1,999.99.
What size hydraulic pump do I need for a log splitter?
This 16 gallon per minute hydraulic pump is a must have for any log splitter application. Fits a wide range of applications, most commonly used on log splitters with a rated force less than 35 TON. This 2 stage gear pump allows for maximum speed without a loss of pressure.
What are the parts of a log splitter?
Key Hydraulic Log Splitter Components Include: Hydraulic fluid tank and hoses. Hydraulic pump. Hydraulic cylinder or ram. Hydraulic control valve. Wood splitter head or blade. Motor or power source. Splitting Wedge.
What is the RAM on a log splitter?
The ram stop is used to shorten the return distance of the log splitter.
How do I calculate my log splitter tonnage?
With a little simple geometry you can calculate a cylinder’s force in pounds or tons. The pound force is the product of the fluid pressure in psi multiplied by the cross-sectional area of the piston. To get the hydraulic cylinder tonnage, divide the pound force by 2,000.
Does hydraulic cylinder size matter?
Why Size Matters The size, in terms of bore and surface area of a hydraulic cylinder, directly affects the available force and internal pressure – thus determining its potential power output. It therefore makes sense to work backwards from the capacity required from your cylinder before settling on size.
How wide are log splitters?
Dimensions Length 89.5 in. Width 51.3 in. Height 39.3 in. Weight 434.3 lb.
How good are electric log splitters?
If you want to do you back a favor and replace your axe with a log splitter, there are many great options to choose from. While gas-powered versions are bigger and more powerful, electric splitters are quiet, less polluting – and usually quite sufficient for most home users.
What does the ton rating mean on a log splitter?
Tonnage is the amount of force that the ram of a log splitter will exert as it splits a log. So to put it simply, the higher the tonnage the harder the ram will push on the log and the easier it will push through bigger logs. Lower tonnage would equal less force.
How much force does a splitting maul have?
And they serve only one function – splitting wood. Photo by Lorna Kring. The cutting edge is slightly rounded, making it duller than an axe, and the head shape is much broader. A maul cleaves wood along the grain and is powered by the momentum generated by its heavy head – typically in the range of four to 12 pounds.
How many tons does it take to split a log?
Large logs require a 30-ton log splitter, whereas small logs can be split by a 4-ton splitter. The age, type of wood, and other factors matter as well.
How much horsepower do you need to run a hydraulic pump?
1 HP is required for each 1 GPM at 1500 PSI or any multiple of 1500 such as 3 GPM at 500 PSI, 2 GPM at 750 PSI, 1/2 GPM at 3000 PSI, etc. Another handy rule-of-thumb is that it takes about 5% of the pump maximum rated HP to drive the pump when unloaded and pressure is very low.
How much HP does it take to run a log splitter?
If you are serious about making your own backyard log splitter, then you want to have, at a minimum, the following components to provide the right amount of force and power for basic splitting of averaged sized, seasoned logs: A 5 Horsepower engine. A two-stage hydraulic pump rated at a max of 3 gpm at 2,500 psi.
What is the fastest hydraulic log splitter?
This Hyper Split Fast Cycle log splitter by Tool Tuff Direct is one of the fastest hydraulic log splitters on the market today thanks to their new cylinder technology. Powered by a Ducar 6.5HP horizontal shaft engine. This proven engine has been tested in cold weather and high elevations.
How do I increase the cycle time on my wood splitter?
Increasing Log Splitter Return Stroke Speed If your desire is simply to just increase the return stroke speed, you can just replace the hydraulic cylinder with one that has a larger push rod diameter. This decreases the volume of fluid between the rod and the bore so that less fluid is required to retract the cylinder.
How can I speed up my log splitter?
Only way to speed up a splitter is to move more oil. Either get a bigger pump or speed up the existing pump.
