Table of Contents
How do you build a fireplace mantel beam?
Instructions: Step 1: Cut 45• miter cuts at each end on two of your 1x8x6 boards. Step 2: Glue and nail the boards in place. Step 3: Measure and cut your end caps to size. Step 4: Distress your beam. Step 5: Fill the wood seam with wood putty. Step 6: Sand your beam.
How deep should a fireplace mantel shelf be?
A depth of 7 inches is ideal for most mantels, as it allows plenty of room to accommodate decorative objects. Keep in mind that the top and the sides of the mantel should be the same depth. First, use a measuring tape and pencil to measure and mark the mantel top to size.
What type of wood is used for mantels?
Walnut is a popular choice for fireplace mantels. It is a harder and heavier type of wood than most and is extremely durable. The rich dark brown wood is an excellent for an impressive fireplace mantel. Hickory is also a great choice for a fireplace mantel if you are going for a unique look.
What is a floating mantel?
Our mantels are hollow on the inside, providing an easy alternative to solid wood mantels. Live grain end caps maintain the look of a solid piece of wood. Each mantel is hand crafted from reclaimed longleaf pine, providing a unique look and character that cannot be duplicated.
How do you install a floating mantel?
Here’s how to install a floating mantel!How to Install a Mantel Remove the old mantel. Add support by drilling holes for lag shields, then install lag bolts into the brick. Measure carefully and drill corresponding holes for the wood mantel. Push the wooden mantel carefully into place using wood glue for extra support.
How wide are most fireplace mantels?
For a quick reference, a 36-inch fireplace will probably have a mantel width of 48 inches. A 42-inch fireplace will probably have a mantel width of 54 inches. The mantel should not be so wide that it reaches anything else, like a wall, window or door.
What height should a mantle be?
The average height ranges between 50 and 60 inches because as a general rule mantles are never lower than 50 inches, but they can be above 60 depending on what look and feel you are going for in your house.
How tall is the average fireplace mantel?
Standard Mantel Height Again, “proper” height is relatively subjective to your fireplace, but average or standard fireplace mantel height construction is around 54” above the hearth’s floor.
Can you use timber for a fireplace mantel?
This reclaimed barn beam would be a true rustic fireplace mantel in your home or business. All mantels are surface washed and kiln dried, and have a variety of finish options and customizations to choose from. These solid wood timbers are cut to your specified length and finished with your preferred shade of finish.
Does Pine make a good mantel?
Woods to Avoid for a Fireplace Mantel Not all woods are suitable for fireplace mantel shelves. Softer woods like fir and pine look attractive when they have been sanded down and polished, but are known to crack easily with the passing of time.
What are fireplace mantels made of?
What Are Fireplace Mantels Made Of? Standalone floating mantels are commonly made from wood, while mantels found as part of a complete fireplace surround can commonly be found made from wood, stone, concrete and marble.
How do you attach a floating mantel to a brick fireplace?
Slide Over Bolts Method Locate the studs behind the brick, stone, or faux veneer. Drive 1/2in lag screws through each of the studs. Have a helper support the mantel while you mark the location of the support rods on the back of the beam. Apply construction adhesive into the holes. Slide into place, admire, and enjoy!.
How far should mantle be above fireplace?
As a general rule, it’s important to mount the mantle an average of 12 inches over the fireplace opening, which is a general rule from the National Fire Protection Agency (NFPA) to ensure it’s up to code. The mantle can also be 4 1/2 feet above the floor.
How much does it cost to build a mantel?
Install a Fireplace Mantel: national average cost cost to install a fireplace mantel National Avg. Materials Cost per mantel $236.47 National Avg. Cost (labor and materials) for 1 mantel $578.11 National Cost Range (labor and materials) for 1 mantel $483.53 – $672.69.
How much weight can a fireplace mantel hold?
Combustible objects placed on or around the mantel must meet your fireplace manufacturer’s requirements for clearances to combustibles. DO NOT OVERLOAD MANTEL: THE MAXIMUM LOAD FOR ALL 60 INCH MANTELS is 150lbs. MAXIMUM LOAD FOR ALL 72 INCH MANTELs is 180lbs.
How many inches should a fireplace mantel be?
Usually, it is best to add six inches to both sides of your fireplace to determine the length the mantel should be. For example, a fireplace that measures 36 inches across the top should have a mantel that is 48 inches long. The mantel should not be so long that it extends from wall-to-wall.
Should the fireplace be wider than the TV?
For the false wall options, generally there is a rule of thumb – always make sure the fireplace is wider than the TV. This allows the wall to frame the TV, while offering sleek lines for the edges of the fireplace. Having more space beyond the TV edges can sometimes make the TV look too small for the wall it is on.
How far above the mantle should a TV be mounted?
The rule of thumb is, if your mantel is less than four feet from the floor, you should mount your TV about 12 inches above it. This rule applies to a fireplace without a mantel as well.
Is Poplar a good wood for mantels?
A Poplar Fireplace Mantel is the most economical wood specie option due to its abundance. Our Poplar Fireplace Mantel Surrounds are available in both paint and stain-grade levels.
