Table of Contents
Can you put a bookshelf on the wall?
Bookcases typically stand on the floor, but if you don’t have the floorspace, you can hang one on the wall. All bookcases are designed with a stretcher or board across the back at the top and bottom. This board gives the bookcase stability. The type that can hang on the wall should also have a backing.
Do bookcases need to be fixed to the wall?
Bookcases do not need to be fixed to the wall unless circumstances call for it due to safety reasons. It is recommended that you fix your bookcase to a wall if you have pets or small children, or if you live in areas that are prone to earthquakes.
Do I really need to anchor my bookshelf?
Bookcases, dressers, armoires and cabinets are all worthwhile candidates for anchoring — so is any piece of furniture holding a TV. Consider, too, whether a piece of furniture has drawers, shelves or doors.
How deep should bookshelves be?
Shelf depth for a general purpose bookshelf is usually 10 to 12 inches. Shelf spacing will generally range from 7 to 15 inches with 8 to 12 inches being common for bookshelves. To prevent the case from looking and being top-heavy, use a smaller shelf spacing near the top and a larger one near the bottom.
How deep should built in shelves be?
Most shelves are built a minimum of 11 to 12 inches deep, but this is your chance to customize: Go for it!.
How do you stabilize a freestanding bookcase?
Drill a hole for each foot in the underside of one of the legs and tap in the foot, using a hammer. Right the bookshelf and put it back into position. Raise or lower each foot until the bookcase stops wobbling. Raise the feet by turning them clockwise; lower them by turning them counterclockwise.
Does Billy bookcase have to be attached to wall?
The Billy Bookcase is not specifically designed to be wall-mounted. Consequently, the only standard wall connection with the Billy Bookcase is two small brackets that attach the top of the shelving unit to the wall. That being said, there is no reason why you can’t get creative and wall-mount a Billy Bookcase.
How do you keep a bookshelf from falling down?
Fasten a furniture strap to the wall and the bookcase to keep it from tipping over. The straps cost about $6 at Target and hardware stores. Or, fasten the bookcase to the wall by driving 3-in. screws through the back of the bookcase (at obscure locations) into studs (be sure you hit studs).
Will my bookshelf fall over?
Furniture will sometimes tip over because it is top-heavy. Try to keep heavier items on the lower half of your bookshelf to help stabilize the bookshelf at the bottom.
How do you secure a shelf to a wall without screws?
You can use plastic ties, steel cables, or Velcro straps to accomplish. Please note, you may have to drill or glue hardware to the back of the furniture. Be aware this method may not be sufficient for holding up furniture to the wall in the event of jostling, a natural disaster, or if the furniture is top-heavy.
What size are built in bookshelves?
You can also find classic bookcases in standard sizes of 24 inches wide, 36 inches wide, and 48 inches wide. Standard heights are usually 36 inches, 48 inches, 72 inches, 84 inches, or roughly 90 inches tall. The average depth of a bookshelf is between 11 and 12 inches, though it can be shallower for media storage.
How far away can bookshelves be from enchantment tables?
The bookshelves must be arranged one block away from the enchanting table in a 1 high, 5 by 5 square, with an opening for a door.
How much should a built in bookcase cost?
The cost to have built-in bookshelves installed averages $2,673 or between $1,274 and $4,091 for a carpenter to do the job. If you buy the materials yourself, you can usually get a handyman to install them for $30 to $130 per hour. For high end custom work, expect to spend $150 to $1,200 per linear foot.
What is the standard height between shelves?
Average Shelf Spacing A good average spacing for shelves is between 8 and 12 inches. If you have oversize books to store, you might prefer to increase the spacing to 15 inches.
How do you support a leaning bookshelf?
If your bookcase is leaning because it has a leg that is too short, Wobble Wedge® plastic shims are great for fixing this problem too. Soft plastic Wobble Wedge® shims will protect delicate wooden bookshelves from dents while allowing you to level the shelf on hard flooring, like wood or tile.
How do you brace a leaning bookcase?
Stand a level on the side of the bookcase. If the level shows that the bookcase is leaning to one side, tap on the side of the bookcase with a rubber mallet until the bookcase is level. If it won’t stay in place, tighten the screws slightly and tap on the case until it stays level.
How do you stabilize a Billy bookcase?
To correct and strengthen your BILLY, all you need is a few more nails (consider using double the nails as suggested in the original instructions) and some wood glue. Place the flimsy backing piece back on your bookcase as directed, but use more nails hammered more closely together.
Do Billy bookcases fall?
Thanks! The Billy bookcases have a high likelihood of tipping because they’re so tall but also so slender. With glass doors, it’s guaranteed to tip, especially when you’re pulling open the doors. The little L shaped brackets that come with the hardware will be enough to hold it in place.
Can you stack Billy bookcases?
BILLY bookcases are built with a stackable design that allows you to attach new units whenever you need additional storage, just decide on what height suits your space best.
How do you balance a bookshelf?
For a balanced look, avoid placing all books on the left side or the right side. Instead, space books throughout your bookcase, occasionally filling only half a shelf or skipping a shelf entirely. Group books with solid-colored or mostly solid-colored covers by shades and group multicolored books by topic or size.
