Table of Contents
How deep should bar shelves be?
The bar top should be at least 18 inches deep. 20 to 24 inches is better if you have the room. My bar ended up being 28 inches deep so that it would completely cover a rear shelf that is used to store bottles of soda, beer, glasses and supplies.
What is the typical bar overhang?
A typical overhang for a comfortable seating area should be around 25-30cm (10-12”), this should leave enough knee room and adequate space between the countertop edge and the person seated. Therefore, as the depth of the overhang increases, so does the comfort and usability of the bar.
How wide are bar shelves?
A two-tiered back bar shelf that displays liquor should be 9 to 10 inches wide. Each step should be 4 to 5 inches high. The distance between the edge of the bar and the adjacent wall should be 76 to 90 inches. There should be 30 inches of aisle space behind a bar stool for easy movement.
How much weight can floating shelves hold?
How Much Weight Can A Floating Shelf Hold? It depends on the build and the bracket. Believe it or not, most floating shelves can’t carry much weight at all. A standard floating shelf can usually only carry between 15 to 30 pounds.
Do floating shelves need studs?
Ideally, you should attach floating shelves (or anything else you’re hanging) to a wall stud, as this will give you the most supportive base for your project.
How wide should a bar ledge be?
Home bar tops are usually between 12- to 16-inches wide. Commercial bar tops vary from 20- to 28-inches in width, including a drink rail (or trough) on the server side of the bar.
What is the ideal height for a bar?
The standard height for a bar in the United States is 42 inches. This is the perfect height for a 30 inch bar stool. You want 12 inches of clearance between the top of the bar stool and the top of the bar.
How tall should a drink rail be?
Measure up from the floor, and mark each end of a wall or section of a wall at the height the ledge installs. Typically, a drink ledge is between 36 and 42 inches high.
What is a bar rail?
A bar rail is the longer rail that hangs directly below the top of a bar. The purpose of it is to make a bar look complete and also someplace to hang your purse or jacket when visiting your favorite pub.
What is a bar speed rail?
Bar speed rails, or bottle racks, provide a place to store your most needed bottles of liquor and mixers close at hand, making service faster and raising potential profitability.
Is 8 inch overhang enough?
If you have a smaller room to work with, you can go with the minimum overhang of about 8 inches. You will want to find a good balance between not taking up too much space and still having enough room for people to sit.
How far can a countertop overhang without support?
Different countertop materials have different requirements. Solid Surface countertops can overhang 6 inches without additional support (e.g. plywood decking). 3 cm Quartz (engineered stone) can handle a 14 inch overhangs and 3 cm Granite overhangs should not exceed a 10 inch overhang without additional support.
How do you support a bar overhang?
Overhangs like those found on a wall pass through, and eating bars of more than 6”, but less than 12”, can be supported with wood or metal corbels. They can also be supported by a relatively new product called a COUNTERBalance™ CounterPlate™.
How wide should shelves be?
The lowest shelf should be 3 to 4 inches from the floor level. Shelf width or span is determined both by aesthetics and sag considerations. Shelf depth for a general purpose bookshelf is usually 10 to 12 inches. Shelf spacing will generally range from 7 to 15 inches with 8 to 12 inches being common for bookshelves.
Do floating shelves hold less weight?
Generally, the deeper your floating shelf is, the less weight it can hold, or the stronger the floating shelf bracket needs to be. If you are floating kitchen shelves, 12″ usually works since most cabinets and the plates, cups, and bowls they house, are 12″ or less deep.
Can you put up a shelf without wall plugs?
For heavy loads we’d recommend 38 mm or 50 mm screws as these have a strong fixing and don’t need wall plugs. The screws should be the heaviest gauge that the holes in the bracket will take. This is usually a 4 mm gauge on small brackets and 5 mm or 5.5 mm on larger ones.
Can I hang floating shelves with Command Strips?
To hang up your shelf, you’ll need to get strong adhesive mounting strips designed for pictures or other large objects. Popular adhesive strips include Command picture hanging strips, Scotch reclosable fasteners, and Velcro removable mounting strips.
How do you attach a shelf without studs?
Fortunately, there are several different options you can use to support a shelf. The most common one is a drywall anchor, which is like a plastic screw that plugs into drywall. If you’re working with plaster or need something that bears more weight, try using a molly bolt. For very heavy shelves, pick toggle bolts.
Is 45 inches too high for a bar?
Commercial Bars They should measure between 42 to 45 inches. In this case, you should consider the average height of both males and females, which is 5 feet, 4 inches. This is equivalent to 64.8 inches, which makes 42 -45 inches perfect for a commercial bar setting.
How much space should be between bar and wall?
Allow at least 36 inches between the bar and the back bar or wall. This is a bare minimum to allow a single bartender space. If constructing a large bar, where it is possible more than one person will be behind the bar, allow more space.
How do you frame a breakfast bar?
Steps: Use a utility knife to cut along the corners of the wall and the ceiling. Make an inspection hole to see what wiring is behind the wall. Use a hammer to remove drywall all the way to the floor. Frame in the breakfast bar with 2x4s. Build the base for the cabinets with 2x4s. Set the cabinets in place on the base.
