Table of Contents
How deep is a valance?
A standard valance should have a drop of about 18 to 24 inches. You may be able to make a 16- or 17-inch drop valance work in some cases, but anything less than that may be too short.
How far should a cornice come out from the wall?
Cornice boards are usually mounted 4 inches above the top of the window frame or window treatment. The height of the cornice is generally 1/5 the total height measurement of the window or the current treatment.
What type of wood is used for cornice boards?
The commonly used wood for making cornice boards are MDF or plywood.
How much wider than the window should a valance be?
Most valances should only be 1-1/2 to 5 inches wider than the window if the valance hangs by itself or over a Roman shade. It should be 10 to 30 inches wider than the window if it’s hung over a pair of custom drapes. If the valance is gathered, its total, flat width should be 2 to 3.5 times the width of the window.
What can I use instead of a valance?
Tablecloth Linens. A crafty homeowner can whip up a window treatment with any textile—even table linens! Debbie from Debbie Doo’s took pretty cloth napkins and hung them from a rod using curtain clips. The result is an easy and cheerful alternative to a traditional valance.
How far down should a window valance hang?
Another rule of thumb used by decorators is that the window valance depth should be 1/4 of the overall window height, plus 1 inch. A 60-inch tall window, then, would call for a 16-inch deep valance, while a 48-inch window calls for a valance about 13 inches deep.
What is curtain pelmet?
Pelmets are narrow pieces of wood or cloth used above curtains, doors, and bed frames to conceal curtain fittings or even unwanted rods. Pelmets can be made out of fabric over a wood frame, which may also contain foam padding.
What is the length of most valances?
It depends on the style of the valance, as well as how it’s installed and how high the ceiling is. Outside-mounted valances usually have an average drop length of 17 to 21 inches if hung on walls with 8-foot ceilings, and that length gets proportionately longer as the ceiling gets taller.
How long should a valance be for a 36 inch window?
To determine the width of a valance for a 36-inch window, the Window Treatment Expert website suggests adding 2 to 4 inches on each side, adding less for narrower windows and more for wider windows. For a 36-inch window, this measurement would provide you with a valance that has a width of 40 to 44 inches.
What is the normal width of a valance?
If you’re shopping for ready-made valances, the most common standard size you’ll likely come across is a 50-inch wide valance. If you’re hiring a custom workroom, you can specify any size.
How deep should a cornice box be?
Your cornice should be an inch or two longer than the curtain rod, including the finials, to make it easy to install. It should also be deep enough to clear the finials and the rings by 1 inch.
How high should cornices be?
You cornice boards may be any height you wish. But try to keep the overall size proportionate. A general rule of thumb used to determine the cornice height is to measure the width of the window casing and add 6 inches. To begin building your cornice, cut the two side pieces to the desired depth and height.
Are cornice boards still in style?
It is very safe to say that cornices are still in style, so don’t hesitate, pick a cornice that integrates your whole space cohesively and set up by your window space. The year 2020 presents an array of options with cornices right from the classic wooden cornices, right up to the upholstered options as well.
Can you use a valance with blinds?
Valance over drapes is quite common, imparting a regal and luxurious feel to the rooms. Valances can, however, be also paired with blinds and shades. You have to choose the color and design judiciously to pull off the look that you want to create.
How do you hang a cornice board without a top?
Secure a screw into each pilot hole, leaving a small part of the head poking out. Line up the keyhole marks on the back of the cornice board with the screws, and push the cornice against the wall. Pull down gently to lock the cornice board in place.
Can you use Liquid Nails on cornice?
Use the caulking gun to apply a bead of Liquid Nails Fast to the top and bottom of the back of the cornice surface. Place cornice firmly into position and press against the wall. Liquid Nails Fast should be used with mechanical fasteners in structural, critical or high stress applications.
Do you need a double curtain rod for a valance?
We recommend using two single curtain rods of 1″ – 2″ in diameter: the top one is for the valance with swags and tails, and the lower one for the two curtain panels. This way, you have more flexibility in adjusting height, width and projection (distance from the wall).
What size valance do I need for a 40 inch window?
Our example window is 40 inches wide, including the window frame. That means that the valance should cover a total width of about 42 to 44 inches once gathered. Using a 2- to 2-1/2 times fullness calculation, that means that the valance (when laid flat) needs to be between 84 and 106 inches wide.
How much material do I need for a valance?
The obvious answer is that it depends, but you should expect to need somewhere between 1-1/2 to 5 yards of face fabric for a standard 36- to 40-inch window. For double-wide windows (about 70 to 80 inches wide), about 2-1/2 to 8 yards of face fabric is a realistic estimate.
