Table of Contents
Can I build a retaining wall myself?
While retaining walls taller than four feet should be engineered by professionals, you may be able to DIY a solution for a tall slope by creating two or more shorter “tiered” retaining walls as opposed to a single tall wall.
What is the cheapest way to build a retaining wall?
What Is the Cheapest Type of Retaining Wall? The cheapest type of retaining wall is poured concrete. Prices start at $4.30 per square foot for poured concrete, $5.65 for interlocking concrete block, $6.15 for pressure-treated pine, and about $11 for stone.
What is the easiest retaining wall to build?
For the average do-it-yourselfer, building a retaining wall is easiest when using masonry blocks that will be stacked no taller than three feet, with no mortar binding the stones or concrete members.
How deep should a retaining wall be in the ground?
To keep the bottom row of blocks from pushing outward, bury the lowest section of a retaining wall. The general rule of thumb is to bury about one-eighth of the height of the wall. For example, if your wall will be three feet (36 inches) tall, the first course of blocks should start five inches below soil level.
Does a 2 foot retaining wall need drainage?
These walls need a drainage system regardless of the wall height. If there are poor draining soils such as clay behind the wall, there needs to be drainage incorporated the wall system. Clay when wet is very weak, so it is essential to provide a way for water to escape from behind the wall.
How much should I budget for a retaining wall?
You’ll pay between $250 – 550 per square metre for a retaining wall in Sydney.The cost of retaining wall materials in Sydney. Retaining Wall Material Price Per Square Metre Poured Concrete $200 – 250 Treated Pine $50 – 150 Hardwood $100 – 250 Stone Veneer $110 – 150.
What can I do instead of a retaining wall?
Reinforced Soil Slopes. Reinforced soil slopes are a quick and easy construction style that uses a geotextile, such as polyethylene or polypropylene, to lock existing soil into place to create a reinforced mass. Natural Stone Walls. Wooden Timbers. Gabion Walls. Soil Bioengineered Walls.
How many deadmans are needed for a retaining wall?
Install one dead man every 6 to 8 feet around the entire wall. Continue building up the retaining wall, using landscaping screws to secure each timber. Cover the ground in front of the retaining wall with 2 to 4 inches of bark mulch.
How much weight can a retaining wall hold?
Even small retaining walls have to contain enormous loads. A 4-foot-high, 15-foot-long wall could be holding back as much as 20 tons of saturated soil.
WHY DO Retaining walls fail?
A retaining wall will fail when it is unable to withstand the force on it created by the soil behind it. Water is heavy, and as it builds up in the soil behind the wall the force acting on the wall dramatically increases. At some point, that force may exceed the capacity of the wall and cause the wall to fail.
Can you build a retaining wall on concrete?
While you can build a retaining wall on concrete, it isn’t that straightforward. If you have an existing concrete base, you cannot just build your wall on top of it. Without being secured into the concrete, your wall will slide due to the soil pressure against the wall.
How high can a sleeper retaining wall be?
This system works for sleeper walls up to 1200mm in height; anything higher than 1200mm needs to be designed by an engineer to take account of local ground conditions and loadings.
What is a sleeper retaining wall?
One particular type of retaining wall is a sleeper retaining wall. These walls used wooden or concrete planks, usually built for use in railroad tracks (parts called sleepers since they simply lay in place and allow for trains to glide along them) to form the structure of the retaining wall.
How long will railroad tie retaining wall last?
Cons: Limited life span (10 to 20 years) because timbers rot and are damaged by pests.
Do you need gravel behind retaining wall?
Second, a retaining wall must have properly compacted backfill. In order to provide proper drainage, at least 12 inches of granular backfill (gravel or a similar aggregate) should be installed directly behind the wall. Compacted native soil can be used to backfill the rest of the space behind the wall.
Can you use sand as a base for a retaining wall?
To keep the blocks on your retaining wall level and structurally sound, you need a base layer of several inches of well compacted, sharp gravel. Be sure to use coarse builder’s sand, and tamp it down firmly to keep the sand from shifting and settling after the wall is built.
Does a 4 foot retaining wall need drainage?
Any reinforced wall or walls over 4 ft. (1.2 m) in height or with slopes or other surcharges above the wall will need a toe drain. In all cases wall rock is located within the cores of the block and a minimum of 12 in. (300 mm) behind the block.
How much does it cost to level a yard with retaining wall?
Leveling your backyard isn’t cheap, but it’s well worth it. A typical leveling job can take between a few days to a week and can cost roughly $2,500, which includes materials like sod and topsoil.
What kind of engineer do I need for a retaining wall?
In New South Wales, any retaining wall over 600mm from ground level requires a structural engineer.
How much does an engineered retaining wall cost?
Generally speaking, the California average cost for a retaining wall is anywhere between $300-$900 per linear foot.
