Table of Contents
How do you make a rat trap car?
Build a Mousetrap Car Step 1: Materials. 2 pieces of Cardboard (4” x 10”) many dimensions will work, but this is a good starting place. Step 2: Car Body. Step 3: Attach the Straws. Step 4: The Mousetrap. Step 5: Preparing the Wheels. Step 6: Adding the Axles and Wheels. Step 7: Attaching the Hook to the Rear Axle.
What do I need to build a mousetrap car?
What You Need: Wooden snap-back mousetrap. Duct tape. 4 eye hooks. Wooden dowel that fits inside the eye hooks. Heavy cardboard. Large and small rubber bands. Foam board (usually found at a craft store) String.
How do you make a rat trap car go far?
Mousetrap cars will go farther if the spring has more distance from the back wheels. Create traction on the wheels. Add rubber bands, or tape around the wheels to give them better traction. The better the wheels can grip the floor, the farther the mousetrap car will go.
How do you make a fast mousetrap car?
Making The Vehicle Faster Thicken the axle: Wrapping some tape radially around the axle or adding a spool. It may be surprising as to how much faster this makes the vehicle. Use smaller wheels. They will require less force to complete a rotation. Make the vehicle lighter.
What can be used as wheels for a mousetrap car?
As you might guess, the materials used to build mousetrap-powered cars are light out of necessity. Foamcore board or balsa wood are often used for the body. The wheels can be off-the-shelf radio-controlled car wheels, but many builders use blank CDs or DVDs because their thin edges reduce friction.
What is the fastest mousetrap car?
The Speed-Trap Racer is the fastest mousetrap powered racer anywhere and was designed after Doc Fizzix’s own record-setting mousetrap racer that traveled 5 meters in 1.2 seconds.
What is an axle hook on a mousetrap car?
An important part of a mousetrap vehicles propulsion system is the axle hook. If the string does not properly release from the drive axle the string will rewind around the drive axle and cause the mousetrap car to come to an instant stop.
What makes a mousetrap car move?
The mousetrap storespotential energyin the form of the spring. That potential energy is converted into kinetic energy in the form of the arm rotating forward. The arm pulls on the wound-up string, which turns the drive wheel dowel, which is connected to the wheels, which makes the car drive forward.
How long should a mousetrap car be?
The ideal size for an ultra big wheel on a long distance mousetrap racer seams to be somewhere between 10 and 15 inches. And the ideal size for a drive wheel on a speed-trap racer seams to be between 2 and 3 inches but no more than 4 inches.
How long should the lever arm be on a mousetrap car for distance?
For maximum speed, position the mousetrap 2 1/4 inches from the drive axle and cut the lever arm to a length of 4 1/4 inches. The lever arm can be cut using a dremel tool or by using a fine tooth hobby saw. The lever arm should always be “just” long enough to reach the drive axle or performance will be compromised.
How do you make a mousetrap car stop at a certain distance?
For an easier to adjust and more accurate braking set-up see the lock-nut system. The idea with the string methods is to use a set length of string that will wind around a brake axle until the target distance is reached and then the string will trigger some type of brake or stopping mechanism.
How do you increase the friction of a mousetrap car?
Larger diameter axles have greater friction when compared to the same axle of a smaller diameter. With a smaller diameter axle the force of friction is applied closer to the center of rotation and applies less torque than a larger diameter axle. Try to select axles that are equal to or less than 3/16 inch in diameter.
When designing a trap car What are the 2 variables that truly determine performance?
In general, mousetrap competitions have two categories, speed and distance. If you want to optimize for speed, you’ll want to design a car that exerts as much force/rotation as possible on the wheels as fast as possible.
What is gravity vehicle?
Gravity Vehicle is an event that returned for the 2020 and 2021 competition seasons after being held in 2012 and 2013. In this event, competitors design and build a ramp and a vehicle that is powered solely by the vehicle’s gravitational potential energy.
Are CD wheels good for mousetrap car?
Mouse Trap Cars: CD/DVD Wheels. Learn more about using DVDs/CDs as wheels on your mousetrap racer. DVDs/CDs make great wheels because they can slice through the air with very little resistance. Because CDs and DVDs are some of the best wheels you will ever find for building a long distance mousetrap powered vehicle.
What materials can be used to hold a mousetrap car together?
Build the Body of the Mousetrap Car The cardboard becomes the frame of your car. Then place the two pieces of heavy cardboard on top of each other and use your masking or duct tape to tape them together, making a double-thick, heavy-duty piece of cardboard.
Why is my mousetrap car not going straight?
If your mousetrap car does not travel straight energy is also being wasted to over come the force of friction turning the vehicle’s wheels. If a mousetrap vehicle is not traveling straight then there is one reason and one reason only: the front and rear axles are not parallel to one another!Jan 21, 2012.
How do you make a mousetrap car reversible?
To make a reversing mousetrap car go forward and then come back you will need to know how to “back-wind” the string. Back-winding the string it a technique where you first wind the string around the axle in one direction and then rewind the string in the opposite direction.
What happens if the mousetrap is mounted too close to the drive axle?
7. What happens if the mousetrap is mounted too close to the drive axle? The energy goes too quickly and you lose pulling force.
What simple machines are in a mousetrap car?
Six Simple Machines Inclined plane • Wedge • Screw • Lever • Wheel and axle • Pulley Your mousetrap vehicle will have a number of moving parts making it a type of machine.
Are Bigger wheels better for a mousetrap car?
By changing the size of the drive wheel(s) you can speed-up or slow-down your mousetrap vehicle. Larger drive wheels will have a greater travel distance per each turn compared to smaller drive wheel.
What size wheels are best for a mousetrap car?
Use large rear wheels. So, for maximum distance, make the wheels on the drive axle (the one the mousetrap is tied to, which is usually the rear one) very large. The front wheel is a little less important — it can be large or small.
Is it better to have a lighter or heavier mousetrap car?
A heavy mousetrap vehicle will required more pulling force than a lighter mousetrap vehicle in order to achieve an equal acceleration. Lighter mousetrap vehicles will require less energy at the start and can use longer lever arms for more pulling distance.
