Table of Contents
How much does it cost to add a water feature to a pool?
A water feature comprises 10 to 15 percent of the total cost of pool construction on average, Marshall says. Typical waterfalls run $7,000 to $10,000, though some cost as much as $30,000.
Can you add waterfall to existing pool?
Yes, it is possible to add a waterfall to an existing pool. Speak with waterfall companies or ask a professional to come and look at your pool to show you what options are available.
How do pool water features work?
Typically rocks are stacked in natural looking positions to a desired height. Water flows from the top rock down the rest of the rocks, then descends into the pool. The water flow can usually be set from a slow trickle to a fast moving waterfall.
Are water features expensive to run?
Water fountains don’t use a lot of electricity, but they can become pricier if you use high-end pumps. Less water and horsepower will reduce electrical consumption, but it’ll also lessen the effect of the fountain. Most water fountains cost less than $50 per month to operate several hours per day.
Do water features add value?
Home appraisal experts say in higher-end neighborhoods where expensive landscaping is the norm; a pond or water feature may boost your home’s value to the top of the price range. A much less expensive alternative is to add a pond-less water feature to enhance the outdoor landscape.
How much do outdoor fountains cost?
Water Feature or Fountain Prices by Material Material Price Range Plastic or Resin $100 – $400 Fiberglass $100 – $1,600+ Rock or Stone $200 – $1,200+ Concrete $300 – $3,000+.
Does a pool waterfall need its own pump?
Your waterfall will need its own pump. The pump you choose depends on the size of your waterfall. We recommend that for each inch in your waterfall length you get a pump with 1 GPM. So if you purchase a 48″ Original waterfall you will need a pump that can handle 48 GPM.
Are pool waterfalls a good idea?
Waterfalls help keep water moving throughout your pool, which helps keep your water clean. Working in tandem with your pool pump, the additional airflow and circulation helps evenly distribute chemicals throughout your pool and move water through your filtration system.
What are pool bubblers?
Pool bubblers are fountain-like additions that spew water in a pool’s shallow areas. These are typically used on spas, pool steps, and shallow shelves. If your pool compliments your outdoor kitchen or has surrounding trees and greenery, having bubblers at home can maintain that Zen vibe that you are aiming for.
Do fountains cool pool water?
Fountains & waterfalls Fountains and waterfalls lower the water temperature—as the water action that is created by fountains and waterfalls causes evaporation, which cools the water. This also tends to cause more water loss due to this evaporation.
Why is my pool fountain not working?
The pool pump runs but has low water flow. It could be something blocking it, a dirty pool filter, or too much air in the system. If there’s something blocking your pump’s suction, check your filter gauge. This will reduce pressure and reset your pump’s flow. Then check your pump basket and impeller for debris.
What is an above ground pool skimmer?
Above ground pool skimmers are typically located in a unit that hangs on the side of the pool, with the basket slightly submerged in the water. It works much like an inground pool skimmer in that it pulls the top layers of water into the basket to filter out debris.
How can I cool my pool water?
Cool Pool Water: 6 Ways to Keep Your Pool Water Cool #1. Invest in a Mechanical Evaporative Chiller. #2. Run Your Pool Filter at Night. #3. Add a Water Feature. #4. Shade Your Pool Area. #5. Drain & Refill Your Pool. #6. Consider a Reversible Heat Pump. Stay Cool This Summer.
Do water features use a lot of electricity?
Many water features are self-contained, so the water just circulates. You may just need to top up the water occasionally. If the feature has moving water, you will probably need an electricity supply to drive the pump, unless the feature is solar powered. Practically all water features will work the same way.
Should I leave my water fountain on all the time?
Water fountain pumps are meant to run 24/7. It is harder on the pump if it is turned on and off continuously. You should not need to turn your fountain off as long as there is enough water in the fountain for the allotted time.
Are water features hard to maintain?
Water features can be a challenge to maintain. They are a lot like having a mini pool. The water level requires observation, the equipment requires maintenance, and sometimes chemicals need to be added to keep the water clear. Leaf litter, dirt and other debris can build up over time and cause problems.
Is it harder to sell a house with a pool?
It won’t be easy since a swimming pool can actually make your home harder to sell. Many buyers consider it a liability rather than a luxury. Under the right circumstances, however, a pool could boost your home’s value by as much as 7%, Houselogic estimates.
Does a small pond add value to property?
Ponds provide recreational opportunities, increase property values. Many people enjoy living near a body of water. Lutz noted that studies have found that in rural areas, a well-managed pond can increase property values five to 15 percent.
What do you need for a water feature?
A running water feature needs a pump and a reservoir, which can involve digging a large hole and hooking electrics up to the mains,’ says DIY expert, Jo Behari. The simplest way to introduce water, especially on a patio area, would be to install a small bowl pond, which doesn’t need a pump and reservoir.
How long does it take to build a fountain?
The average pond or water feature takes about 3 days to complete, while small fountains may only take few hours and very large ponds may take 3 weeks.
