Table of Contents
How do you build a base for a hot tub?
Gravel Base Dig out an area several inches deep and make sure the ground at the bottom is pressed flat. Fill the hole with gravel and press it down to make sure it will not shift or sink once it has weight on it. The gravel will conform to the shape of the bottom of your tub to hold it firmly in place.
How do you support a hot tub on the ground?
Gravel is an excellent choice for a hot tub base. It’s relatively cost-effective and easy to install, plus it’s very good for drainage. This is important because you need to make sure any rain water or overspill from your hot tub is able to drain away from the base. And unlike concrete, gravel won’t crack over time.
Can you put a hot tub on a wood platform?
You essentially need to double the supports of the deck for it to hold a hot tub. You will need larger lumber and more of it. This all would need to be engineered to your specific project details like how high off the ground, how much total weight, and more.
What is the best base to put a hot tub on?
Concrete Base This tends to be a common approach for hot tubs becuase it offers strong support for the weight and also keeps the area nice and clean. Concrete is solid, not overly expensive and is quite easy to lay.
Can I put hot tub on gravel?
Gravel has two main advantages, it is good for drainage and easy to install. First, you will need to remove about 6 inches of soil before lining the hole with landscaping cloth and placing a 4 inch layer of gravel on top. So yes, a hot tub can sit on gravel!Oct 18, 2018.
Can you put a spa on pavers?
Surfaces that suit hot tubs are: Concrete Slab – for spas you require a level base of 100mm (4”) minimum thickness with F72 mesh (subject to soil conditions). Pavers are OK as long as they are flat and are bedded well (concrete base or cement mixed with crusher dust).
What should I put down under my hot tub?
Below are some foundation ideas for inflatable hot tubs. Grass. It is probably one of the most popular surfaces used as an inflatable hot tub base. Paving Slabs. Concrete Pad. Crushed Gravel. Tub Pads. Interlocking Tiles. Ease Of Access and Maintenance. Drainage.
What type of foundation do you need for a hot tub?
A concrete surface is an excellent base for your hot tub as this material is extremely sturdy and long-lasting. If you have an existing patio made of concrete bricks, make sure it’s in good condition and is level (not angled for drainage). A customized poured concrete pad is an even better choice.
Do hot tubs have leveling feet?
If you ever need to move the hot tub, a spa leveler can be relocated and then releveled to the new spot’s contour by simply adjusting the feet again.
Does a hot tub have to sit on concrete?
A hot tub requires a stable surface — whether it’s a concrete slab, reinforced deck, or firmly compacted soil with crushed gravel. There’s also the option to have the hot tub installed in the ground but that still requires a concrete vault.
Can you put inflatable hot tub on decking?
Using your decking as a base for your inflatable hot tub can cause instability and structural damage to your decking frame. As for the record we are advising you NOT to use your decking for your hot tub base.
How thick should a concrete base be for a hot tub?
A solid cement pad should be no less that 4 inches thick. This is something that the average homeowner may not want to tackle. The spa pad should be at least the size of the spa. If you are going to pour cement pad put a slight slope in it so that water won’t pool under the spa.
Do you have to plumb in a hot tub?
Hot tubs are fully portable units and are NOT plumbed in. You will need to be within a hose distance of a water supply to fill the hot tub up. But that’s it, no pipes or permanent water supplies are necessary.
Can you put a hot tub directly on the ground?
A hot tub should not be placed on soil or on a lawn. Instead, it will need a solid platform to support all of the weight. Exposure to wet soil and grass will reduce the life of your hot tub and expose it to insects and moisture. A hot tub should never be installed in soil or on a lawn.
How many inches of gravel do you need for a hot tub?
Make sure you are digging at least 6 inches for your base, but nothing more than that. Without enough gravel, drainage can be compromised. With too much gravel, the hot tub base may become too soft and cause damage over time.
What base does a spa need?
A reinforced concrete slab of at least 100mm (4”) thick is a suitable foundation for your spa; this must be increased to a minimum of 125mm (5”) thick when installing swim spas. You must ensure this base is an even, level surface free from cracks or hollows.
How do you put a hot tub in your backyard?
In most cases getting the hot tub into the backyard is fairly simple and straightforward. A delivery crew will bring the hot tub to your home and then place the hot tub on its side on a hot tub cart. Then they roll the cart into your backyard and to the spot you would like the hot tub placed..
