Table of Contents
How deep should a kitchen soffit be?
Options Planning Soffits: A soffit is the bulkhead between the ceiling and the top of the cabinets. Distance from floor to soffit should be at least 84″. Allow another 14″ if you install an 84″ cabinet. Depth may vary – normal is 13″ which is 1″ deeper than a wall cabinet.
How do you build a soffit frame?
Table of Contents Step 1: Measure and Mark. Step 2: Cut and Install Wall and Ceiling Plates. Step 3: Build the Box Frame. Step 4: Install the Box Frame. Step 5: Mark the Studs. Step 6: Cut and Hang the Drywall. Step 7: Add Finishing Touches.
Are kitchen soffits out of style?
Kitchen soffits are out of style, with fewer people retaining these fixtures in their homes and fewer still having them installed at all. Their outdated look often makes a room look smaller, and when building new kitchens, it’s better to free up that space for a bigger and brighter feel.
What is a kitchen soffit?
A kitchen soffit is usually a boxy structure built to hide wiring, pipes, or other mechanicals, or to fill the space between the top of your cabinets and the ceiling. Depending on the age of your home they may be very large and perhaps even extend out past the cabinets.
What is a kitchen bulkhead?
A bulkhead is a section of ceiling that has been dropped and boxed-in or enclosed. It’s not uncommon to have bulkheads in your kitchen, bathroom or basement. Bulkheads are typically used to conceal something. It could be plumbing pipes, electrical wires, duct work, or exhaust fans.
What do you do with kitchen soffits?
8 Ways to Deal with Those Awkward Kitchen Cabinet Soffits Fill in the space with trim. Fill in the space with a furr down. Fill the space with trim in a contrasting color. Get some really tall upper cabinets. Add a second row of cabinets. Add a window. Paint the wall the same color as the cabinets. Embrace it.
What is the average size of a soffit?
Soffits usually range from 16 to 24 inches wide. For instance, CertainTeed Ironmax soffits may span 24 inches without additional nailing strips, if permitted by code rules.
What is ceiling soffit?
Soffit ceiling is the covering that forms a ceiling on the underside of the roof in the area that extends beyond the walls of a home. Simply put, it covers the gap between the wall and the fascia, also referred to as the eave. It can also cover the underside of arches, stairways, and balconies.
What wood is used for soffits?
Although unsanded and touch-sanded grades of plywood are often used for soffits, optimum appearance and finish performance is achieved by using panels with Medium Density Overlay (MDO), or textured (such as APA 303 Siding) or sanded A-grade faces.
Can I build a soffit with 2×2?
A soffit is usually constructed with 2×2 lumber, which is easy to work with and inexpensive. You can use 1 x 3s to keep the frame as small as possible and 2 x 4s for large soffits that will house other elements, such as recessed lighting fixtures Chases should be framed with 2 x 4s.
Can you use OSB for soffit?
Basement Soffits & drops are easy to build using 2X2’s and ½” OSB plywood. Not much to how to build them as you rip the plywood to the desired height which can be determined by the lowest duct height allowing space for framed material under the duct as well.
Should kitchen soffit be painted same color as walls?
If you’re asking us, then our answer is a resounding – YES! No matter which side of the soffit paint debate you landed on at the end, either wall or ceiling color, painting the entire soffit the same color is important in making sure it looks intentional and cohesive.
How do you fill the space between kitchen cabinets and ceiling?
You can build the cabinets to the ceiling (most expensive option), keep the area open (no cost!), build a soffit to match the cabinets, or add a drywall soffit.
Are soffits load bearing?
There is nothing below the soffit and it’s hanging from the ceiling so it can not be load bearing. Only reason I can think of it being is decoration. Is this a kitchen? often there will be a soffit that comes down to the cabinet height.
What is interior soffit?
A soffit is an exterior or interior architectural feature, generally the horizontal, aloft underside of any construction element. Its archetypal form, sometimes incorporating or implying the projection of beams, is the underside of eaves (to connect a retaining wall to projecting edge(s) of the roof).
Why is there a soffit above kitchen cabinets?
A kitchen soffit serves a purpose, which is typically to cover up and hide the necessary kitchen wiring, ductwork, and even plumbing. The only way to know what is behind the soffit is to look at the original building plans or to cut holes into strategic areas to determine what’s inside.
What’s the difference between a soffit and a bulkhead?
That is a soffit a term used more in the HVAC trade. A bulkhead is a wall by definition. Bulkhead is a wall in a ship that separates compartments. The International Building Code section 717.2.
How do you disguise a kitchen bulkhead?
How to Disguise a Kitchen Bulkhead Paint your bulkhead the same color as your ceiling to help it blend in, if it hangs away from your cabinets. Attach decorative items to the bulkhead to help disguise its awkwardness and make it look purposeful.
