Table of Contents
What can I use instead of a Kreg jig?
Alternatives to Kreg jig Pocket Hole Screws CSH Pan-head screws. Massca pocket hole screws. SNUG pocket hole screws. Quick Screw pocket hole screws.
How do you drill a pocket hole without a Kreg jig?
To toenail boards together without any pocket hole jig, just start drilling a hole downward to get it started, then tip your drill to angle it toward the other board. You’ll still want to clamp the pieces together when you drive the screw in place to keep them from slipping apart.
Do you need a jig to make a pocket hole?
All you need is the jig, a drill (that can also act as a driver), and pocket hole screws. A drilling guide, a stepped drill bit and depth collar, and a long drive bit. The drilling guide typically has two or more holes so you can create two pocket holes in wide boards.
What is the angle of a pocket hole jig?
Pocket holes are a very useful joinery technique in woodworking. Hole are drilled at an angle, usually 15 degrees, into a workpiece and then joined to a second workpiece with self-tapping screws.
How do you make a wooden right angle?
First, be sure that all the ends of the cut pieces of timber for your right-angles are cut square and are smooth. You will need some good, strong wood glue. Take two of the pieces of wood, and glue the end of one piece neatly to the side at the end of the second piece. This forms a right-angle.
What material are drill bushings made of?
Material. Standard drill bushings are manufactured from either C1144 Stressproof steel or other high carbon steels. The bushings are heat treated to achieve an ID Rockwell hardness of C62-64.
Which is used for bushings in a drill jig?
Press-fit bushings are designed for one-step operations, such as drilling or reaming. The bushings are pressed directly into the jig plate. They are held in place by the force of the press fit.Figure 10-11. BUSHING OD A MINIMUM B MINIMUM 1/2 .73 .312 3/4 .98 .438.
How thick should the bushing wall be?
Thick-walled bronze bushings feature a standard wall thickness between 0.0625 and 0.156 inches. In comparison, the wall thickness of a plastic bushing is much thinner, typically anywhere from 0.0468 to 0.0625 inches.
What is a drill bit guide?
Drill Guide Kit This simple, yet precise Drill Guide locates exact drilling centers and guides drill bits perfectly perpendicular to the work piece on flat, round, spherical and corner edges. The Drill Guide allows you to make clean, accurate holes. It has many hole drilling uses around the house or workshop.
What is a drill guide?
A drill guide, like the one shown above, makes drilling straight holes by hand just about foolproof. A drill guide is nothing more than a jig that mounts to the end of your drill and guides it in a straight path. Think of it as a set of training wheels for your drill.
What router bit is used for box joints?
There is only one bit size used with the Box Joint & Beehive Jig. Your new jig is shipped with a 1/2″, 2 flute, carbide tipped straight bit. You may also use a 1/2″ spiral upcut bit in high speed steel or solid carbide.
What is the difference between a dovetail joint and a box joint?
A box joint is similar to a dovetail joint. The main difference is that the cuts are not tapered. Like a dovetail joint, a box joint forms a 90 degree angle and joins the ends of two perpendicular pieces of wood to form a corner. Box joints are easily cut using a dado blade on a table saw.
Can a router be used as a mortiser?
Creating accurate mortises quickly is a great way to get the most out of your plunge router. This easy-to-use jig simplifies the process. One of the best ways to get the biggest bang from a plunge router is to put it to work routing mortises. The technique is easy to master and the results are top-notch.
Is a Kreg Jig necessary?
Kreg makes a tool for everyone. Ultimately, you’ll need to decide if one of their tools is right for you. The Kreg Jig is a valuable tool. If you plan to construct cabinets, bookshelves, tables, or anything with multiple joints, then the Kreg tool is undoubtedly worth your money.
Do you have to use Kreg pocket hole screws?
Do you have to use Kreg pocket hole screws? You really do need to use Kreg screws when using the Kreg jig. The screws come specially designed to work with the holes that are drilled by the Kreg jig. Trying to use other screws will not properly bring the wood together.
What is an alternative to pocket holes?
These days the simplest non-jigged method is probably to use just a drill, sometimes using multiple bits to form the various holes needed — a face hole (using a Forstner or sawtooth bit), the clearance hole in the first piece (this goes into the side of the hole formed by the Forstner) and the pilot hole in the Dec 9, 2016.
Do I need special screws for pocket holes?
A description of the Kreg pocket hole screws says you must use their special screws because “the wide bearing surface of the screw head will not overdrive in the bottom of the pocket. This is especially important in softer material such as plywoods and composites.
Are pocket holes stronger?
The superior strength of a pocket hole joint has actually been proven. Independent testing found that a pocket screw joint failed at 707 pounds when subjected to a shear load while a comparable mortise and tenon joint failed at 453 pounds – meaning that the pocket screw joint was approximately 35% stronger.
What is a keyhole router bit used for?
Keyhole bit is used for cutting keyhole slots in plaques, picture frames and other wall hanging items.
