Table of Contents
How much does it cost to build a home bar?
A home bar costs $8,000 on average or $500 to $22,500. Custom work runs $5,000 to $20,000. Premade units run from $800 to $6,000, not including plumbing, outlets or lighting. Labor and design fees range from $200 to $8,000.
What is a wet bar vs dry bar?
Essentially, a wet-bar has a sink with running water. A dry bar only has a place where you can prepare drinks and no sink. The technical difference is just a matter of plumbing.
Does a home bar add value to a home?
Does a Wet Bar Add Value to a Home? According to Remodeling magazine’s cost-versus-value projection, a basement remodel with a home-based pub and bathroom is around 70%.
How big should a home bar be?
Most standard home bar designs are at least 6′ long to accommodate three bar stools or an 8′ bar that will give you room for four stools. You’ll also want to think about the shape that you’d like your bar to be.
What tools do I need to build a bar?
Tools Required to Build a Home Bar: Compound Miter Saw. Circular Saw. Drill. Hammer. Finishing Nails. Nail Gun. Brad Nails 15-16 Gauge (Optional) Safety Glasses.
How tall should bars be?
Bar height is the tallest option available. Bar-height tables usually measure between 40 to 42 inches high. In comparison, the seat heights of bar stools and chairs are anywhere between 28 to 33 inches.
What’s the purpose of a sink in a wet bar?
A wet bar is a designated space where you can make alcoholic drinks for guests while entertaining in-home. Its name comes from the fact that a wet bar always has a sink. This sink allows for easy clean-up without having to retreat to your kitchen sink, and it can also act as a makeshift ice bucket.
What is a bar area called in a house?
A dry bar is a piece of furniture or separate counter area built into a room, designed to hold everything you need for an in-home bar: bottles, barware, cocktail napkins and other accessories.
How deep should a wet bar be?
Not Too Deep It should be large enough to fit a sink and fixtures but not so deep you can’t reach to the back. Typically a bar top that is a minimum of 18 inches deep works well, but you can extend this to 20 to 24 inches to allow more space for larger sinks and fixtures.
Where do wet bars go?
While today’s home layouts include open floor plans that make the kitchen easily accessible, a wet bar can still be a good idea. They are still popular in a “man cave” or entertainment room in a finished basement, as well as in upscale patio entertainment areas.
Is a wet bar considered a kitchen?
The main difference is that a wet bar is typically used solely for drink preparation, while a kitchenette allows for the preparation of both drinks and food. There are various reasons why a homeowner may choose a wet bar over a kitchenette and vice versa.
What is a wet bar refrigerator?
A wet bar is a space in a home or hotel room that provides a countertop area to prepare alcoholic or non-alcoholic drinks. The addition of small appliances such as microwaves or mini-fridges, or even large built-in ones such as ovens are additions you may consider adding to a wet bar.
How much space do you need behind a home bar?
Walking space behind the bar should be 3′ wide minimum. Front bar width will be either be 2′-10″ or 3′-6″ depending on either a 1 or 2 tier bar. Bar stool area should be at least a 3′ area to move bar stools in and out.
How much overhang should a bar have?
A typical overhang for a comfortable seating area should be around 25-30cm (10-12”), this should leave enough knee room and adequate space between the countertop edge and the person seated. Therefore, as the depth of the overhang increases, so does the comfort and usability of the bar.
How wide does a bar need to be?
Home bars and commercial bars differ, of course. Home bars are much smaller and tend to be between 12” and 20” wide. A commercial bar is usually 20” to 30” wide, and that includes the drink rail on the bartender’s side.
What is the bar exam out of?
The California Bar Examination consists of the General Bar Examination and the Attorneys’ Examination. The General Bar Exam consists of three parts: five essay questions, the Multistate Bar Exam (MBE), and one performance test (PT).
How do you make a dry bar?
Follow these steps to get started: Buy or Build Your Cabinets. The first thing you’ll want to do is decide if you’re going to build the cabinets for your dry bar or purchase premade ones. Prepare the Cabinets for Painting. Paint the Cabinets. Install the Cabinets. Install the Bar Top. Add Upper Cabinets or Shelves. Enjoy.
