Table of Contents
How do you prepare the ground for a ground level deck?
Preparing Deck Site Checklist Layout the shape of the deck with a hose or string and remove any sod. Ensure there are no underground services in the area where you will be digging. Locate the positions of the piers and footings. Dig the holes for the footings and piers. Prepare the soil with landscaping fabric.
Can I build a deck directly on the ground?
Yes, you can build a deck directly on the ground, but with some conditions. A deck on the ground must be built with ground-contact wood, and the substructure needs to be adapted for minimal height. Even though technically a ground level deck is elevated up to 24”, here we will discuss decks built less than 8” high.
How do you build a simple deck step by step?
Step 1: Attach the Ledger. Photo by David Carmack. Step 2: Protect the Ledger. Step 3: Set Footings and Piers. Step 4: Install Post Bases and Side Rim Joists. Step 5: Install Front Rim Joist, Beams, and Interior Joists. Step 6: Install Front Rim Joist, Beams, and Interior Joists (continued) Step 7: Attach Trim and Decking.
Do I need footings for a ground level deck?
If you want to expand your outdoor living space, a ground level deck might be your best option. Since it’s not connected to a house, it can go anywhere in your yard and doesn’t require deep footings. Because it rises just inches above ground, it doesn’t need stairs or railings.
What put under decking?
Many professional and self-made builders agree that gravel is the perfect material to place under your deck. How can you put gravel as your deck’s base? First, you will need to prepare the installation area and dig a few inches out. Then, you’ll need to cover the area with landscaping fabric.
Can you put decking over dirt?
You will be pleased to learn that, YES, outdoor deck and patio tiles can be easily installed on uneven ground, grass and dirt. They can be used as a permanent, temporary or even portable outdoor floor. Many companies only sell interlocking patio tiles that work when installed over even, flat and hard ground.
Can pressure treated wood touch the ground?
Ground-contact pressure-treated lumber can be used either above ground or in contact with the ground. Has twice the level of chemical retention and protection compared to above-ground treated wood. Must be used when lumber is less than 6 inches from the ground or has poor ventilation.
How do you build a freestanding deck?
How to Build a Freestanding or Detached Deck Step 1: Layout & Prepare the Deck Site. Step 2: Dig Concrete Footing Holes. Step 3: Pour the Concrete Footings. Step 4: Install the Posts. Step 5: Build the Beam. Step 6: Set the Beam. Step 7: Install the Floor Joists. Step 8: Lay the Deck Boards.
Is it hard to build a deck yourself?
Building a deck is not as hard as you might think, and if you follow some basic guidelines it can be a great DIY project. Decks are built to add living space to a home and every one of them should be built nice and level.
How many footings do I need for a ground level deck?
For an 8×10′ freestanding deck, you’ll need six footings. Unless you have access to a power auger, that’s a lot of digging. After digging each hole, you will need to install tube forms into each. Each tube form then needs to be filled with one 60 lb.
Can I use deck pier blocks instead of footings?
Pier blocks can be used instead of footings for a ground-level deck not requiring permits. Piers blocks can also be used if the frost level depth is less then the height of the pier block.
Can I use 4×2 for decking frame?
4 x 2 Timber Rail / Joist These decking joists are the most common sized framing timber for decking. They provide a solid structure for fixing your decking boards too. When making your decking frame you should use a 400mm spacing between your timber joists.
Can I use pallets as a base for decking?
Even though it may not last as long as decking planks, pallet wood is intended to be used outdoors and, if you install a quality pressure-treated timber base, it won’t rot away from below. If any planks crack over time you can simply replace them with more pallet wood for an easy, low-cost fix.
Should you put plastic under a deck?
Plastic under the deck will trap moisture, increase rot and attract insects to your deck. Landscape fabric is a better alternative for stopping weeds from growing under the deck while allowing water to drain. Never put plastic under a deck except if its part of a dry deck system drainage system.
What size wood should I use for decking frame?
Commonly used joist sizes are 2-by-6, 2-by-8 and 2-by-10. For example, when you space joists 16″ apart — which is standard for residential decks — a deck spanning 9 1/2′ would require 2-by-6 joists, a 13′ deck would need 2-by-8 joists and a 16′ deck calls for 2-by-10 joists.
How do you build a level platform on uneven ground?
1 Answer Lay out a simple rectangle with joists at 16″ centers (across the short dimension). Using a 6′ level (or a shorter level with a straightedge extension), find the difference from the highest point to the other three corners, and cut legs or simple spacer blocks to level up the platform.
How do you level uneven deck boards?
Once locating the joists needing to be planed, you have three options to level out the joist: a wood planer, belt sander or circular saw. The idea is simple, remove the material above the line. Reseal with end treatment, and voilà, you have a consistent decking surface.
Can I use 2×4 for floating deck joists?
The short answer is yes. 2x4s can work for deck joists. However, they aren’t ideal for spanning long distances without bending or breaking, so you have some limitations. Choosing 2x4s for a low-sitting deck is perfect for keeping your feet out of the mud.
How do you lay decking on soil?
Laying decking on soil: 4 easy steps Materials. Equipment. Step 1 : Create a solid foundation. Step 2: Build a decking frame. Step 3: Lay out and level the decking slabs. Step 4: Add and level the decking frame. Now you can lay decking on soil with peace of mind.
