Table of Contents
How much does it cost to build garage shelves?
But the basic rule of thumb for garage shelving is $60 per linear feet. There would be additional costs for hooks and accessories. So, for a 12-foot system (shelving only, installed) would cost approximately $720.
Is it cheaper to buy or build garage shelves?
Lower Cost – Generally, buying the materials for your garage shelves should be cheaper than purchasing prefab – just make sure you do everything right the first time. Tailored – Making your own allows you to build shelving that meets your exact needs.
How thick should Plywood be for garage shelves?
We use 1/2″ plywood for the 16″ width shelving – perhaps go up to 5/8″ or 3/4″ if you do 24″ wide shelving or have especially heavy loads destined for these shelves.
How deep should a garage shelf be?
Garage shelves typically range from 12 – 24 inches deep.
How much does it cost to build your own shelves?
Built-in Shelving Costs Item Unit Cost Line Cost Materials: stronger woods that do not sag are the most affordable while premium or decorator materials are much higher in price. $70-$180 per linear foot $700-$1,800 Labor (carpenter/installation) $70 per hour $840-$1,190 Total Cost $154-$299 per linear foot $1,540-$2,990.
Is 1/2 inch plywood strong enough for shelves?
For everything else, like casework, shelves, slab doors, drawer fronts, and raised panels (done with edging with solid wood). In using 1/2″ for cabinet construction, it has the propensity to warp, and doesn’t lend itself to hold screws very well (because of the thickness).
How thick should OSB be for garage shelves?
The dimension of shelf width is hotly debated, but we settled on a depth of 16 inches. It’s deep enough to support tool cases and standard boxes, but shallow enough as to not lose stuff in the back and have to reach to far. Our shelves are cut from 1/2-inch OSB and measure six feet in length.
What size plywood should I use for shelving?
First and foremost, the wood you use for making bookshelves will impact the design as well as the cost of your project. ¾-inch plywood is considered the industry standard, thanks to it being strong yet inexpensive—especially when compared with some solid woods.
How tall should a storage shelf be?
Ideally, shelves should be 6” to 1′ off the floor to keep the items stored on them clean and dry. This also leaves the floor area for storage of bulky and heavy items such as shop vacuums and five-gallon containers.
What is a good shelf height?
How High Should I Hang My Shelf or Shelves? Like artwork, shelves should be hung at about eye level or about 4 to 5 feet from the floor. If you’re hanging the shelf above furniture, measure about 10 inches from the top of the desk or couch.
What is a good shelf depth?
The shelves shouldn’t be too deep. The standard depth of most shelves is 16 to 20 inches deep. The highest shelf should be shallower, like 12 inches deep, to make those items easier to access. If you find that stuff seems to get pushed to the back and forgotten about, you should consider even shallower shelves.
How much does wood cost to build a shelf?
Custom Bookshelf Cost by Material Material Price per Linear Foot (Installed) Plywood $400 – $500 Metal $450 – $800 Metal and Wood $450 – $1,000 Wood $500 – $1,000.
How much weight can a 2×4 shelf hold?
A 2×4 can hold up to 40 pounds or 300 pounds when laying on its edge without sagging when laying horizontally. Several factors can lower or increase a 2x4s strength, including wood species, lumber grade, and moisture content.
Do shelves need to be anchored?
If you’re going to be attaching your floating shelf and bracket to a wall stud, you do not need any anchors. If you are working with plaster or drywall, however, additional support is necessary. Wall anchors, also called molly plugs, will help you build a sturdy foundation for your shelf.
How do you secure a freestanding shelf?
You can add cross bracing with straps to strengthen the shelves. If you have more than one shelf, place them together back to back and attach them together using bolts for metal shelves or screws for wooden shelves.
How do you hang garage shelves without studs?
Fortunately, there are several different options you can use to support a shelf. The most common one is a drywall anchor, which is like a plastic screw that plugs into drywall. If you’re working with plaster or need something that bears more weight, try using a molly bolt. For very heavy shelves, pick toggle bolts.
Is plywood good for shelves?
Plywood is the industry standard for shelving, so it’s a good choice for bookshelves. However, there are a number of sturdy woods with which you can construct bookshelves.
What is the strongest wood for shelves?
Koa. If you want wood shelves that last for a long time, you should consider using Koa wood. This is considered to be the hardest among commercially available wood types. Even so, Koa is lightweight and has beautiful shellac qualities.
Is 12mm plywood OK for shelves?
It is generally unsuitable for shelving as the finish is poor. Use 12mm chipboard as a minimum and support the shelf at no greater than 300mm centres for all but the lightest of loads. Or 18mm chipboard with supports no greater than 700mm apart.
How thick should Wood be for shelves?
Use 3/4-inch thick materials for shelves and bookcase structure. If you’re using hardwood solids, it’s OK to boost the thickness to 1 1/4 inch for almost unlimited support. This type of shelf looks more like a mantel and is expensive, but adds the opulent look of craftsmanship.
Should I use half inch or 3/4 inch plywood?
In my experience building cabinets and drawers, 1/2 plywood only becomes useful for drawer sides, sometimes, bottoms, and cabinet backs. However, if you’re working on shelves, fronts, and panels, it would be best to use 3/4 plywood for better strength.
