Table of Contents
Can a floating deck support a hot tub?
In general, most decks can withstand 100 lbs per square foot. So if a hot tub like the one in the example is under that weight, the average deck should be able to support it. It is always wise to contact a professional to get an accurate estimate of what your deck can safely handle.
How much weight can a 10×10 deck hold?
In short there’s no one right answer to “how much can my deck hold?” However, one rule of thumb to keep in mind while answering the question is that the answer commonly is that if a deck is properly designed, it’s built to hold 50 lbs. per square foot.
How much weight can a 12×12 deck hold?
A 12’x12′ (144sq’) deck properly supported can hold 5 760lbs on it. you build. All floating decks, in fact, all decks built to code, can support no less than 40 lbs per square foot of deck.
How do you prepare the ground for a hot tub?
Place a layer of gravel on the leveled spot. The thickness of the layer will depend on the size and weight of your hot tub, but a layer four to six inches thick should be adequate for most hot tubs. Extend the gravel out around the tub in all directions, to avoid having a muddy area around your hot tub.
What is a floating deck?
A floating deck, also called a free standing deck, is simply a deck that’s not attached to any structure, including (of course) your house. Instead, you can put your deck’s structural members — posts, girders, and joists — on precast pier blocks set directly in the ground.
Will 2×6 hold a hot tub?
What is this? Joist size and spacing for non-hot tub decks commonly are 2x6s spaced on 16” centers. The spacing to support a spa is usually 12” centers and joists may increase to 2x8s or greater.
Do I need to reinforce my deck for a hot tub?
Hot tubs, however, are very heavy, especially when filled with water, and chances are that your existing deck can’t safely support it without additional reinforcement. Fortunately, reinforcing your deck in preparation for a hot tub is a relatively easy task.
How heavy is a 6 person hot tub?
There is no single standard hot tub weight. In general, a small two- or three-person hot tub generally weighs around 500 pounds empty and 3,000 pounds when filled with water. A six-person model typically weighs approximately 1,000 pounds empty or 6,000 pounds full.
How much does it cost to build a 12×12 floating deck?
A 12 x12 deck can range in cost from $2 200 to $13 000, but the average will be $6 000. Costing $40 a square foot but can be as little as $15 or as high as $85, depending on the deck’s features. A pressure treated deck is the most economical, with composite being the more expansive option.
How many deck blocks do I need for a 12×12 deck?
Calculating Out How Many Deck Blocks for a Floating Deck Deck Dimension Square Feet of Deck Number of Deck Blocks 12″ x12″ Supporting 2000 lbs 8×8 64 4 8×10 80 4 10×10 100 4 10×12 120 6.
Do I need joist hangers for a floating deck?
Are Joist Hangers Necessary? No, joist hangers are not necessary.
Will a floating deck move?
By very definition, a floating deck will move. Sitting on the surface of the ground, it is as stable as the ground beneath it. A floating deck’s movement is often connected to seasonal freezing and thawing by can also be caused by other factors. If a floating deck has good support, it will move very little.
How much is a floating deck?
Floating decks cost on average $20 to $60 per square foot and can be built anywhere on the property without being attached to an existing structure like a home.
Can a deck hold 5000 lbs?
To determine the maximum load capacity of your deck, start by calculating its total area and multiply by 50 psf. So, a 100 sqft deck would be designed to support 5000 lbs.
How large can a floating deck be?
In the United States, a floating deck’s maximum height is 30″ above grade if not attached to a house or in front of an egress door. In Canada, a floating deck can be no taller than 24″ (0.6m) above grade.
Can I use 2×6 for deck frame?
In general terms, joists spaced 16 inches on center can span 1.5 times in feet their depth in inches. A 2×8 up to 12 feet; 2×10 to 15 feet and 2×12 to 18 feet. 2×6 joists should only be used on ground-level decks that do not require, and will not provide for, any guards.
Can I put pool on deck?
You can place a pool on a wooden deck if the construction takes into account several factors. Of course, pools are very heavy. Finally, water moving around in your pool creates a lot of swaying and stress on a wood deck. Construct a deck that can hold up to the weight and stress of supporting a pool.
How close can a hot tub be to a house?
Having your hot tub right next to the wall of your home is probably too close. The steam that comes from the water may seep into windows and water splashed from the tub may cause a slippery walkway. A few feet away from your home and a few feet away from your walkway is typically the ideal combination.
What base should a hot tub sit on?
If you’re having a base installed especially for your Hot Tub we would recommend a patio, decking area or poured concrete base. Whatever you choose make sure whoever installs it for you ensures the base is level and large enough for your Hot Tub and steps.
