Table of Contents
Can you build a deck over pool?
If your pool has outlived its usefulness and it would cost more to repair than you can afford, you can cover it. Building a deck over a pool presents a challenge similar to any raised deck, so be prepared for hard work, sore muscles and a great sense of accomplishment.
How much does it cost to build a deck over a pool?
On average, building a pool deck costs around $5,000. Most homeowners pay between $3,000 and $12,000 for this project. Where you fall on that range depends on the materials you choose, the size of the patio, and the difficulty of the terrain. A simple wood deck for an above-ground pool may only need a $3,000 budget.
Can you put a deck over an inground pool?
A Pool Deckover Saves Money & Gives You Back Usable Space. If you’re not using your inground swimming as much as you once did, a pool Deckover puts an end to costly pool maintenance and gives you lots more usable living space in your backyard.
How much does DeckOver cost?
Most deckovers cost between $10,000 and $12,000, or $20 to $30 per square foot, and can vary depending on factors such as engineering requirements, various asthetic considerations and optional features.
What is DeckOver stain?
This 100% acrylic formula conceals cracks and splinters up to 1/4″. It creates a slip-resistant, waterproof coating that resists cracking and peeling. It’s available in 54 solid custom colors, and is great for decks, patios, composite decks, pool decks and walkways. View ADVANCED DeckOver Colors.
How much does a deck around an above-ground pool cost?
The cost to build a deck around an above-ground pool is $15 to $30 per square foot depending upon the design and materials used. The deck alone can range from $2,800 to more than $10,000 installed, or buy a small deck system/kit that’s easy to put up as a DIY project for $800 to $3,000.
How much would it cost to build a 20×20 deck?
The average homeowner spends $2,200 to build a 10×10 foot deck, $6,160 to build a 14×20 deck, and $8,800 to build a 20×20 deck. The cost to build a deck with pressure-treated wood, hardwood, or composite is about $25 per square foot, for both materials and installation.
What is the cheapest pool decking?
Pool Deck Pavers Concrete paving stones are the cheapest at about $5 to $10 per square foot. Stone pavers are the most expensive option but offer the most versatility in color, texture and design. Brick pavers can create a beautiful look, and they’re easy to replace if one or more of them crack.
How do you permanently cover a pool?
Rosie recommends that you cover your unused pool with a deck made from a composite material. Composite is a wood-polymer lumber made from wood waste mixed with reclaimed plastic from shopping bags and plastic film.
How much does it cost to backfill a pool?
Full vs. Partial Cost To Fill In A Pool Fill Type Time (Days) Average Cost Partial Removal (Small) 1 – 3 $2,000 – $7,000 Partial Removal (Large) 2 – 5 $2,500 – $10,000 Full Removal & Backfill 3 – 7 $4,000 – $16,000.
What happens if you leave a pool empty?
The Problem With An Empty Pool Pools are designed to hold water. When there’s no water in them, they’re at risk of damage as there’s nothing keeping them weighed down. If left exposed to long periods under the hot sun, pool finishes will dry out, creating cracks and flaking.
What is the best thing to put around an above-ground pool?
Landscaping Around Your Above Ground Pool Concrete or Pavers. Concrete patios are a dependable and easy to care for option for your poolside. Gravel or Rock. Using gravel or rock is one of the most popular ways when landscaping around your above ground pool. Plants or Trees. Planters.
What is a floating deck?
A floating deck is a deck that isn’t attached to a building and they “float” above the ground. Generally, floating decks are low to the ground and don’t require handrails or even staircases. They are sometimes called “grade-level” or “freestanding” decks because they’re built just above the ground level, or grade.
How big should the gap be between a pool and a deck?
The maximum gap between the decking and the pool coping is generally 3/4 inch. Slip resistance, gaps between boards and slope of the deck may also be regulated depending on the local codes. These design requirements should also be considered for any deck adjacent swimming pools or hot tubs, whether in or above ground.
Can I thin Behr Deckover?
DO NOT THIN PRODUCT. For nail holes and cracks up to 1/4″, completely fill in with DeckOver coating using a nylon/polyester brush and allow to dry prior to rolling.
Is Cabot deck correct oil based?
Cabot DeckCorrect Tintable Satin Solid Water-based Mildew Resistant Resurfacer (5-Gallon) in the Waterproofers & Sealers department at Lowes.com.
How long does it take for DeckOver to dry?
Dries to touch in 4 hours. Wait 24-48 hours before light foot traffic. 72 hours to full cure. Additional dry time may be needed in cooler temperatures and higher humidity.
