Table of Contents
What do I need to build a deck?
Deck Construction The foundation and 4-inch-by-4-inch posts. 2-inch-by-10-inch beams. 2-inch-by-4-inch diagonal bracing. 2-inch-by-8-inch framing and joists. 5/4-inch decking. Stairs. Railings.
How much does it cost to build a 10×20 deck?
2. Deck Cost Estimator by Size Dimensions Total Square Feet Average Price Range 10×20 200 $8,000 – $12,000 12×20 240 $9,600 – $14,400 16×16 256 $10,240 – $15,360 14×20 280 $11,200 – $16,800.
Can I build my own deck?
It may seem overwhelming at first, but if you have the time and a solid understanding of basic construction principles, you can build a pretty incredible deck all on your own. Just keep in mind that while a DIY deck project might be a great option for some, it’s not the solution for everyone.
What material do I need for a 12×12 deck?
You will need 18 boards of 2-by-6-inch lumber or nine 2-by-10 inch boards to build the joists, also known as the beams. You should purchase an additional 25 percent wood to allow for framing pieces and waste.
How many decking boards do I need for a 10×10 deck?
For a 10×10 square deck, you would therefore need twenty-two 10′ deck boards. Dimensions for deck boards can vary depending on the look you want and the deck board type you use. However, the most common is a 5/4” thick by 6” wide deck board of any length.
Should I use 2×6 or 2×8 for deck?
For upper-level decks, 2×10 is recommended as the minimum size to use for strong guard post connections. 2×6 joists should only be used on ground-level decks that do not require, and will not provide for, any guards. Most decking is not strong enough to support longer spans than 16″.
What’s the cheapest way to build a deck?
Pressure-treated wood, or chemical-treated wood, decks are generally the cheapest material to build decks with. For up-front savings, that seems great, but don’t forget long-term costs.
How many joists do I need for a 12×12 deck?
For example, a 12-foot x 12-foot deck of 5/4 x 6 pressure treated wood decking on 16 inches on center spacing of joists will require: A 12-foot long deck with joists 16 inches on center will require 10 joists.
Is it cheaper to build your own deck?
When you construct a basic deck with the least expensive lumber on the market, you will probably pay between $8-10 for every square foot of area if you build it yourself. But, if you hire someone to build it, you could end up paying as much as $25 per square foot.
How many hours does it take to build a deck?
A 12 x 24-foot one typically requires two people to complete and will take anywhere from one to three weeks depending on experience and skill level. A professional team can usually have the project done in a week or less.
How much does it cost to build a deck DIY?
How much does it cost to build a deck? For basic deck designs using the least expensive lumber, you can expect to pay from about $8 to $10 per square foot (depending on the material) of deck area if you do the work yourself or pay about $30 per square foot if the material is professionally installed.
Can a novice build a deck?
Any beginner deck building project can seem a bit challenging. This deck design is as simple as it gets. In this course you will learn about design, site layout, footings, beams, ledger attachment, framing, stairs and railings. Think of it as a crash course in building a basic deck.
Is it hard to install your own deck?
Building your own deck is a great way of transforming an outdoor area into a space perfect for entertaining. Believe it or not, it is not as hard as it seems – you can even do it yourself. All you need is timber supply, some materials and the right tools for the job.
Is it difficult to build your own deck?
In general, building a deck is fairly straightforward — you make a basic frame using standard beams and top it off with some kind of deck material. In reality, it ranges from simple to complex. A properly constructed deck requires some knowledge of woodworking, concrete, landscaping and engineering.
How many deck blocks do I need for a 12×12 deck?
Calculating Out How Many Deck Blocks for a Floating Deck Deck Dimension Square Feet of Deck Number of Deck Blocks 12″ x12″ Supporting 2000 lbs 8×8 64 4 8×10 80 4 10×10 100 4 10×12 120 6.
How far apart should deck posts be?
Layout and Footing Locations Starting with your perimeter, mark the location of each deck post to locate the fitting position. In general, posts should be spaced no more than 8 feet apart. Some builders position them every 4 feet for a completely rigid frame.
How do you stagger deck boards?
A common method for staggering a deck is to start the first row with a full plank, then cut one-third of the next row’s first board off the end. The row after that has an additional one-third cut off and then repeat when you get back to a full board.
How much does it cost to build a 20×20 deck?
The average homeowner spends $2,200 to build a 10×10 foot deck, $6,160 to build a 14×20 deck, and $8,800 to build a 20×20 deck. The cost to build a deck with pressure-treated wood, hardwood, or composite is about $25 per square foot, for both materials and installation.
