Table of Contents
Is it OK to put a hot tub on decking?
Using your decking as a base for your inflatable hot tub can cause instability and structural damage to your decking frame. Decking & Hot Tubs – WARNING! As for the record we are advising you NOT to use your decking for your hot tub base.
What kind of wood should I use for a hot tub deck?
Teak hardwood decking – Tectona grandis is referred to as teak, a tropical hardwood used on boat decks, which makes it ideal to use around your hot tub. Teak is a popular decking material because it’s hard, resists mildew, fungi, and rot from moisture. Additionally, Cumaru is referred to as a Brazilian hardwood teak.
How big of a deck do you need for a hot tub?
If you have a raised deck, support joists and beams may need to be added beneath it to add to how much weight the deck can handle. Typically, a deck raised less than a few feet will be able to handle 100 pounds per square foot, which is strong enough for most hot tubs.
Do I need to reinforce my deck for a hot tub?
Hot tubs, however, are very heavy, especially when filled with water, and chances are that your existing deck can’t safely support it without additional reinforcement. Fortunately, reinforcing your deck in preparation for a hot tub is a relatively easy task.
How much weight can a 10×10 deck hold?
In short there’s no one right answer to “how much can my deck hold?” However, one rule of thumb to keep in mind while answering the question is that the answer commonly is that if a deck is properly designed, it’s built to hold 50 lbs. per square foot.
What kind of base do you need for a hot tub?
A concrete surface is an excellent base for your hot tub as this material is extremely sturdy and long-lasting. If you have an existing patio made of concrete bricks, make sure it’s in good condition and is level (not angled for drainage). A customized poured concrete pad is an even better choice.
Can you put a hot tub on a Trex deck?
A hot tub or spa full of water can exert as much as 112 lbs per square foot of decking. A fraction of the 500lbs or more of concentrated load most composite decking can support. Making composite decking strong enough for under and around a hot tub.
Will joist hangers support a hot tub?
Don’t use a ledger board or joist hangers when building a hot tub deck.
What is a floating deck?
A floating deck, also called a free standing deck, is simply a deck that’s not attached to any structure, including (of course) your house. Instead, you can put your deck’s structural members — posts, girders, and joists — on precast pier blocks set directly in the ground.
Can you build your own hot tub?
If you have ever wondered whether you can build a DIY Hot tub in your backyard. Well, it is totally possible.
How much weight can a 12×12 deck hold?
A 12’x12′ (144sq’) deck properly supported can hold 5 760lbs on it. you build. All floating decks, in fact, all decks built to code, can support no less than 40 lbs per square foot of deck.
Does a hot tub have to sit on concrete?
A hot tub requires a stable surface — whether it’s a concrete slab, reinforced deck, or firmly compacted soil with crushed gravel. There’s also the option to have the hot tub installed in the ground but that still requires a concrete vault.
How heavy is a hot tub?
How much does a hot tub weigh? There is no single standard hot tub weight. In general, a small two- or three-person hot tub generally weighs around 500 pounds empty and 3,000 pounds when filled with water. A six-person model typically weighs approximately 1,000 pounds empty or 6,000 pounds full.
Can you put a hot tub on pavers?
Patio Pavers Are The Ideal Support For Hot Tubs But before you run out to the hot tub store, consider where you’re going to place it, and what you’re going to place it on. Once the pavers are in place, they will sweep hydrostatic sand into the joints, and you can set your hot tub up as they leave your driveway.
What is a hot tub pad?
Spa pads are wonderful hot tub accessories that provide a sturdy base for most hot tubs, while still allowing for flexibility in location. People who opt for an indoor hot tub typically use spa pads so that they won’t need to do any major renovations, however, spa pads can be implemented outdoors as well!Oct 30, 2019.
How do I know if my deck can hold a hot tub?
In general, most decks can withstand 100 lbs per square foot. So if a hot tub like the one in the example is under that weight, the average deck should be able to support it.
Can I use 2×6 for deck joist?
2×6 joists should only be used on ground-level decks that do not require, and will not provide for, any guards. Most decks use 16″ on center spacing for joists. Most decking is not strong enough to support longer spans than 16″.
Can a deck hold 5000 lbs?
To determine the maximum load capacity of your deck, start by calculating its total area and multiply by 50 psf. So, a 100 sqft deck would be designed to support 5000 lbs.
Can a hot tub be placed directly on the ground?
A hot tub should not be placed on soil or on a lawn. Instead, it will need a solid platform to support all of the weight. Exposure to wet soil and grass will reduce the life of your hot tub and expose it to insects and moisture. A hot tub should never be installed in soil or on a lawn.
How do you put a hot tub in your backyard?
In most cases getting the hot tub into the backyard is fairly simple and straightforward. A delivery crew will bring the hot tub to your home and then place the hot tub on its side on a hot tub cart. Then they roll the cart into your backyard and to the spot you would like the hot tub placed..
