QA

Quick Answer: How To Build A Commercial Bar Free Plans

What is the standard size for a bar?

Home bar tops are usually between 12- to 16-inches wide. Commercial bar tops vary from 20- to 28-inches in width, including a drink rail (or trough) on the server side of the bar. Drink rails are typically 3/4-inch deep by 4-inches wide. The minimum bar top thickness is 1 3/4-inches utilizing a flat grain wood.

How do you make a restaurant bar?

How to Open a Bar: Your Complete Checklist Write Your Bar’s Business Plan. A failure to plan is a plan to fail. Set Up Your Business Structure. 15 Licenses and Permits Needed to Open a Restaurant. Trademark Your Name and Logo. Obtain the Proper Licenses. Choose a Location. Design Your Bar. Purchase and Track Your Inventory.

How wide should a commercial bar top be?

A commercial bar is usually 20” to 30” wide, and that includes the drink rail on the bartender’s side.

How many sinks do you need behind a bar?

Even the smallest restaurant requires at least two sinks, and many establishments need three. Large commercial kitchens may have several. You need at least one double sink for washing and rinsing equipment. You are required to have at least one more sink for washing hands.

How do you construct a bar area?

5 Steps to Create a Bar Area in Your Home Decide Where to Put It. Like I mentioned, our teenagers hang out in our basement, while Dean and I and our (grown up) friends spend our time on the main floor. Add Stools. Make it Personal. Create Pretty Storage. Add Somewhere to Wash Up.

What makes a bar unique?

Service, décor, atmosphere, drinks selection and food, or at least bar snacks, all contribute to make a good bar but within those broad headings it is numerous small things that contribute to make a truly great bar. What follows is something of a check list.

How much overhang should a bar have?

A typical overhang for a comfortable seating area should be around 25-30cm (10-12”), this should leave enough knee room and adequate space between the countertop edge and the person seated. Therefore, as the depth of the overhang increases, so does the comfort and usability of the bar.

How tall should a homemade bar be?

Just remember that most bar stools are 30 inches tall, so your bar should not be much lower than 42 inches high, to allow for comfortable seating for your guests.

How deep should a bar top be?

Not Too Deep It should be large enough to fit a sink and fixtures but not so deep you can’t reach to the back. Typically a bar top that is a minimum of 18 inches deep works well, but you can extend this to 20 to 24 inches to allow more space for larger sinks and fixtures.

How profitable is owning a bar?

The average gross profit margin for a bar is between 70 and 80%. That’s enormous considering businesses like general retail and automotive are around 25%. A beverage program with low pour cost is the beating heart of a profitable bar or restaurant. The average net profit margin for a bar is between 10 and 15%.

How do I start a bar with no money?

How to Open a Bar with No Money Tip. A new bar can acquire capital through crowdfunding, which includes family friends and individual investors. The most popular crowdfunding sites for the bar business include GoFundMe, Crowdcube, Kickstarter, or Indiegogo.

What are the start up costs for a bar?

Startup costs are the first major hurdle to bar ownership. Total startup costs for a bar that rents or leases its location are estimated to be between $110,000 and $550,000, depending on size. 1 A bar that purchases its location and pays a mortgage has an average startup cost of between $175,000-$850,000.

What is the average height of a bar stool?

Bar stool height: Bar tops are usually around 40 to 42 inches high, so opt for a bar stool about 28 to 30 inches tall.

Do commercial sinks have to be stainless steel?

You may be required to have a 3 bowl stainless steel commercial sink that allows you to wash, rinse and sanitize your dishes. You need to meet hygiene requirements, and employees must wash their hands when handling multiple types of food.

What tools do I need to build a bar?

Tools Required to Build a Home Bar: Compound Miter Saw. Circular Saw. Drill. Hammer. Finishing Nails. Nail Gun. Brad Nails 15-16 Gauge (Optional) Safety Glasses.

How do you make a mood bar?

5 Ways to Create an Amazing Atmosphere in Your Bar or Restaurant for Your Guests Decorations. Your bar or restaurant’s decorations contribute a lot to the overall atmosphere of the space. Lighting. Lighting has a huge effect on the mood of a room. Music. Entertainment. Seating.

How do you style a bar at home?

HOME BAR STYLING IDEAS: A desk and three floating shelves serve as a bar area. An antique chest and simple tray create an area to serve drinks from. Accessories and a plant or flowers do wonders! If you’ve got a buffet in your dining room or kitchen you can use the top as a bar for the evening.

How do I create a bar in a small space?

Home Bar Ideas for Small Spaces Save. Try a Layered Look With Shelves and Storage. Create a Home Bar To Go. A bar cart is one of the most popular choices for small spaces, and with good reason. Save. Swap Wall Shelving. Play Hide & Seek to Optimize Storage. Save. Break Up Your Open Space. Save. Try an All-in-One Cabinet.