Table of Contents
How do you turn a bookshelf into a built-in?
Step 1: Screw the bookcases together. Assemble bookcases if needed. Step 2: Cut trim for bookcases. Step 3: Attach the smaller trim. Step 4: Nail the larger trim. Step 5: Touch up and decorate built-ins.
How much does it cost to have built-in bookshelves built?
The cost to have built-in bookshelves installed averages $2,673 or between $1,274 and $4,091 for a carpenter to do the job. If you buy the materials yourself, you can usually get a handyman to install them for $30 to $130 per hour. For high end custom work, expect to spend $150 to $1,200 per linear foot.
How do you fill a gap between a bookcase and a wall?
Step 1: Scribe and Cut Trim Board. Scribe a board to fit over any irregularities and cut to length. Step 2: Fasten Scribed Board. Fasten the scribed board to the bookcase using screws. Step 3: Fill gaps with Caulk. Fill any gaps between the scribed board and the wall or bookcase with caulk for a clean finish.
How deep is a recessed wall?
Standard wall recesses only measure 3 ½ inches, the depth of the wall studs — not deep enough for even the smallest standard trade paperbacks, at 5 ½ inches wide.
How do you build a recessed niche wall?
use hammer to knock out drywall. Score the Wall, Knock Out the Drywall. Using a carpenter’s square and a level, measure and mark the desired location for the wall niche. nail box into wall studs. Install the Box. Fit the box into the wall. add rosettes to corners to finish. Attach the Trim, Rosettes; Finish Caulking.
How do you hide built-in shelves?
Hang a Picture With Access To The Books A picture can cover parts of the shelf that you don’t want to display. The picture easily swings open. Paint baskets to match the shelving color. Vases look good and can be used for storage. A pull down picture hides what is behind it.
How deep should bookcases be?
Shelf depth for a general purpose bookshelf is usually 10 to 12 inches. Shelf spacing will generally range from 7 to 15 inches with 8 to 12 inches being common for bookshelves.
Is it cheaper to build your own shelves?
The pros of DIY shelving include: Lower Cost – Generally, buying the materials for your garage shelves should be cheaper than purchasing prefab – just make sure you do everything right the first time. Durability – As long as you choose quality materials and a solid design, your DIY shelves will be more durable.
How deep should Built in bookshelves be?
How Deep Should Built in Shelves Be? Take stock of what you’ll be storing on them: trim travel guides or oversize art books, bulky board games or lidded baskets, collectibles large or small. Most shelves are built a minimum of 11 to 12 inches deep, but this is your chance to customize: Go for it!.
How far apart are studs?
The general spacing for wall studs is 16 inches on center, but they can be 24 inches. At my home, the exterior wall studs are spaced at 24-inch centers, but the interior walls are 16 inches on center.
How do you build a Billy bookcase?
Suggested tools. Remove the bookcase backing and prepare the bookcases. Prepare the wall. Determine the placement of your bookcases. Add trim to connect your bookcases. Add wood to encase your bookcases. Finish the built ins with molding, caulk, and paint.
How do you hide holes in bookshelves?
Using the putty knife, apply a small amount of spackling to each section of holes. I worked from top to bottom filling first one row then the next. Use plenty of spackling and push it into the holes as much as you can. You could also use your fingers for this process, but I found a putty knife to be more effective.
How do I reinforce an Ikea bookcase?
To correct and strengthen your BILLY, all you need is a few more nails (consider using double the nails as suggested in the original instructions) and some wood glue. Place the flimsy backing piece back on your bookcase as directed, but use more nails hammered more closely together.
Do bookcases need to be fixed to the wall?
Bookcases do not need to be fixed to the wall unless circumstances call for it due to safety reasons. It is recommended that you fix your bookcase to a wall if you have pets or small children, or if you live in areas that are prone to earthquakes.
How much weight can a Billy bookcase shelf hold?
How Much Weight Can Billy Bookcases Hold? Historically, Ikea Billy Bookcase shelves are designed to hold approximately 30 kilograms or about 66 pounds. This is a lot of weight and usually much more than you will want to place on a Billy Bookcase shelf.
Do I have to attach Billy bookcase to wall?
The Billy Bookcase is not specifically designed to be wall-mounted. Consequently, the only standard wall connection with the Billy Bookcase is two small brackets that attach the top of the shelving unit to the wall. That being said, there is no reason why you can’t get creative and wall-mount a Billy Bookcase.
How deep are Billy bookcases?
IKEA Billy Bookcases come in height variations from tall at 93.25” (237 cm) to short at 41.75” (106 cm). Widths range from wide designs at 31.5” (80 cm) to thin designs at 15.75” (40 cm). All bookcases have a depth of 11” (28 cm).
What do you do with Billy bookcases?
The options for storage for Billy Bookcase are endless. You can use them to store toys, turn them into dressers, house books, transform a room to appear that it has built-in shelving, and so much more!Jan 13, 2020.
