Table of Contents
Does a bar in the basement add value?
The return on investment (ROI) of upgrading your basement That’s great for the inhabitants of your home (hello, man cave!), but it’s also a great way to increase the resale value of your home. In fact, Remodeling magazine’s cost-versus-value projection of a basement remodel with a bathroom and a wet bar is around 70%.
How expensive is it to build a bar?
A home bar costs $8,000 on average or $500 to $22,500. Custom work runs $5,000 to $20,000. Premade units run from $800 to $6,000, not including plumbing, outlets or lighting. Labor and design fees range from $200 to $8,000.
How wide should a basement bar be?
Key Components for a Basement Bar Countertop/bar: The standard height and depth of a bar counter is 42” from the floor and 24” deep. Don’t try to go too much wider than 16-20” wide on your bar top (which includes the overhand) or you’ll have trouble passing drinks over.
How much space should be between bar and wall?
Allow at least 36 inches between the bar and the back bar or wall. This is a bare minimum to allow a single bartender space. If constructing a large bar, where it is possible more than one person will be behind the bar, allow more space.
Why do people put bars in basements?
Believe it or not, the basement bars that you recognize from the ’70s trace their roots all the way back to the Victorian Era’s tea carts. These carts, handy for parlor socializing, later evolved into what we know today as the bar cart.
What is a wet bar vs dry bar?
Essentially, a wet-bar has a sink with running water. A dry bar only has a place where you can prepare drinks and no sink. The technical difference is just a matter of plumbing.
Where do wet bars go?
While today’s home layouts include open floor plans that make the kitchen easily accessible, a wet bar can still be a good idea. They are still popular in a “man cave” or entertainment room in a finished basement, as well as in upscale patio entertainment areas.
How long does it take to build a bar?
Option 3: Start a do-it-yourself home bar project It will take 2-3 days to finish the bar, assuming you’re willing to devote at least 6 hours per day working on it.
Can you put a bar on carpet?
Carpet, tile and luxury vinyl tile are options to consider for your home bar. Carpet provides some sound insulation and will help warm up a room, such as the basement, that tends to be colder than other areas of your home.
How much space is needed for a home bar?
Typically, you want about 2′ of space between bar stools to have enough room to navigate in and around the stools. Most standard home bar designs are at least 6′ long to accommodate three bar stools or an 8′ bar that will give you room for four stools.
How do you make a dry bar?
Follow these steps to get started: Buy or Build Your Cabinets. The first thing you’ll want to do is decide if you’re going to build the cabinets for your dry bar or purchase premade ones. Prepare the Cabinets for Painting. Paint the Cabinets. Install the Cabinets. Install the Bar Top. Add Upper Cabinets or Shelves. Enjoy.
How long is a bar for 4 stools?
Measure the usable length of the counter top or bar. Divide that by 21″ per stool for a small stool and 24″ for larger stools with swivels and arms. Some very large stools may require more than 24″. Looks like 7 feet will be a bit tight for 4 bar stools, 8 feet would be more comfortable.
How high off the floor is a bar foot rail?
Standard bar foot rail height is about 6 inches. The bar rail height is measured from the floor to the center of the tubing. So, this means that the center of the rail should be about 6 inches off the ground to provide the best comfort for the bar patrons.
How deep should a counter bar be?
The surface of the bar should be 24 inches deep. Any larger and it becomes difficult to reach across. A breakfast bar also requires an overhang. This is the space between the base of the bar, and the edge of the counter, where your legs rest while seated.
How much should a bar overhang in a house?
The bar top overhang should be a minimum of 8-1/2” and could be as much as 10” so your knees do not hit the bar front. For our extra tall customers the 10” overhang maybe necessary.
How much overhang should a bar top have?
A typical overhang for a comfortable seating area should be around 25-30cm (10-12”), this should leave enough knee room and adequate space between the countertop edge and the person seated. Therefore, as the depth of the overhang increases, so does the comfort and usability of the bar.
