Table of Contents
How much does it cost to build a 10×12 deck?
Cost To Build A Deck By Size Deck Size Square Feet Average Cost 8×10 80 $1,200 – $2,800 10×10 100 $1,500 – $3,500 10×12 120 $1,800 – $4,200 12×12 144 $2,160 – $5,040.
What material do I need for a 12×12 deck?
You will need 18 boards of 2-by-6-inch lumber or nine 2-by-10 inch boards to build the joists, also known as the beams. You should purchase an additional 25 percent wood to allow for framing pieces and waste.
What’s the cheapest way to build a deck?
Pressure-treated wood, or chemical-treated wood, decks are generally the cheapest material to build decks with. For up-front savings, that seems great, but don’t forget long-term costs.
Is it cheaper to build your own deck?
When you construct a basic deck with the least expensive lumber on the market, you will probably pay between $8-10 for every square foot of area if you build it yourself. But, if you hire someone to build it, you could end up paying as much as $25 per square foot.
Is it hard to build a deck yourself?
Deck construction is not as hard as you might think, and if you follow some basic guidelines it can be a great DIY project. Decks are built to add living space to a home and every one of them should be built nice and level.
How many deck blocks do I need for a 12×12 deck?
Calculating Out How Many Deck Blocks for a Floating Deck Deck Dimension Square Feet of Deck Number of Deck Blocks 12″ x12″ Supporting 2000 lbs 8×8 64 4 8×10 80 4 10×10 100 4 10×12 120 6.
How many decking boards do I need for a 12×12 deck?
For example, a 12-foot x 12-foot deck of 5/4 x 6 pressure treated wood decking on 16 inches on center spacing of joists will require: A 12-foot long deck with joists 16 inches on center will require 10 joists. 20 fasteners x 26 (number of rows of decking) = 520 fasteners. Add 10 percent to be safe.
How many posts are needed for a 12×12 deck?
For an attached 12 x 12′ deck, you’ll need at least 3 footings, plus at least 2 more if you’re planning on building stairs with it.
How far apart should posts be for a deck?
Layout and Footing Locations Starting with your perimeter, mark the location of each deck post to locate the fitting position. In general, posts should be spaced no more than 8 feet apart. Some builders position them every 4 feet for a completely rigid frame.
How far apart should deck footings be?
For most situations, you will want to place footings and posts less than 8′ apart. If you are planning on installing a hot tub or porch on top of your deck, you will usually need more footings and posts to support the additional loads. Decks with a lot of angles may also require additional footings.
How much does it cost to build a deck DIY?
How much does it cost to build a deck? For basic deck designs using the least expensive lumber, you can expect to pay from about $8 to $10 per square foot (depending on the material) of deck area if you do the work yourself or pay about $30 per square foot if the material is professionally installed.
How can I save money building a deck?
8 Tips for Saving Money on Getting a Deck Built Type of Deck. One of the first items of business before building a deck is to ask yourself what it will be used for. Deck Design. Materials. Watch the Flyers. Contractor Deals. Buy Accessories in Bulk. Deck Blocks Instead of Pouring Concrete. Seal Your Deck.
Whats cheaper flagging or decking?
Decking is more affordable, quicker to install but doesn’t last very long. Paving slabs can be pricier, take longer to install but require little-to-no maintenance and will last for a long time.
How do I calculate deck materials?
The first step for answering “how to calculate how much decking I need” is to determine your deck’s square footage, or area, by taking the length of your deck times the width (L x W). EXAMPLE: For a deck that is 16 feet long and 12 feet wide, multiply 16 by 12. This gives you 192 square feet, your deck’s total area.
How many decking boards do I need for a 10×10 deck?
For a 10×10 square deck, you would therefore need twenty-two 10′ deck boards. Dimensions for deck boards can vary depending on the look you want and the deck board type you use. However, the most common is a 5/4” thick by 6” wide deck board of any length.
What do I need to build a deck?
Deck Construction The foundation and 4-inch-by-4-inch posts. 2-inch-by-10-inch beams. 2-inch-by-4-inch diagonal bracing. 2-inch-by-8-inch framing and joists. 5/4-inch decking. Stairs. Railings.
Can you build a deck without pressure treated wood?
Yes, you can use untreated wood to build a deck, but not without preparing it first. You can’t, of course, pressure treat it yourself, but you will need to seal; the wood and stain/paint it to ensure the wood is ready to take on the harsh external weather.
Can one person build a deck?
It may seem overwhelming at first, but if you have the time and a solid understanding of basic construction principles, you can build a pretty incredible deck all on your own. Just keep in mind that while a DIY deck project might be a great option for some, it’s not the solution for everyone.
