Table of Contents
Boil concentrated sap in kitchen until it reaches a temperature of 7 degrees over the boiling point of water (varies with elevation). Skim off foam, if necessary. Pour into sterilized canning jars, leaving appropriate head space, and cover with sterilized lids and rings. Process in boiling water bath for 10 minutes.
How long does it take to boil maple syrup?
Depending on how far we’ve already taken it down, it takes us anywhere from 15-45 minutes to finish it. So, how do you know it is done? Well, when it reaches the temperature of about 7 degrees above the boiling point of water… or approximately 219F if you’re around sea level.
How do I know when maple syrup is done boiling?
Boil it as soon as you can. Finished maple syrup will be 7°F above the temperature of boiling water at your elevation. Your syrup or candy thermometer will tell you this. If you have a larger operation you may get a syrup hydrometer and testing cup which will tell you when the syrup is done.
What happens if I boil maple syrup?
Maple syrup that is boiled too long will crystallize and maple syrup that isn’t boiled long enough will spoil quickly and will be watery because the concentration of sugar in the syrup will be too low.
How do you make maple syrup step by step?
The five steps involved from start to finish are: (1) preparing for the season; (2) determining WHEN to tap; (3) identifying the trees to be tapped and tapping them, (4) collecting the sap and processing (boiling/evaporating) it; (5) filtering, grading and packing the syrup.
How much maple syrup do you get from 5 gallons of sap?
How much sap does it take to make maple syrup? The general rule of thumb is that it takes 40 parts maple sap to produce 1 part maple syrup. This translates into 40 gallons of sap to produce 1 gallon or syrup (or 10 gallons of sap for one quart of syrup). This estimate is dependent on the sugar content of your sap.
Can you boil maple sap inside?
Because of the large quantity of steam generated by boiling sap, it is not recommended to boil indoors. If you do decide to boil the sap indoors, make only small batches and ensure good ventilation (and keep an eye that your wallpaper does not peel off the walls).
Why does my homemade maple syrup crystallized?
Simple syrup crystallizes when enough of the sugar molecules stick to one another that they become insoluble in the water. In a syrup prepared with a high 2:1 ratio of sugar to water (often referred to as a rich syrup), the chance of sugar molecules clustering and crystallizing is high.
What temperature does maple sap boil at?
The sap should be at a boiling temperature around 217°F to 218°F. Transfer the concentrated sap to a smaller boiling pan or pot and complete the finishing process on a controlled heat source such as a gas burner, camp stove or kitchen range.
What is floating in my maple syrup?
What could be floating in your maple syrup is a mold that some studies indicate is non-toxic. According to Vermont Maple Sugar Makers’ Association, you can remove the mold, boil your maple syrup, then transfer it into a clean container for future use.
Can maple syrup be heated?
Re-Heating Maple Syrup Re-heating your syrup to 180°F will kill any mold or bacteria in your syrup and make it safe to eat. The sugar content will increase a little bit as some of the water evaporates from the maple syrup, but this probably won’t be an issue for most folks.
Does maple syrup dissolve in water?
As far as sugar goes, maple syrup is an all-natural, minimally processed option that’s basically evaporated maple sap. Finally, maple syrup is water soluble, which makes it easy to digest and quick to absorb.
How long does it take to boil maple syrup to soft ball stage?
In a large heavy-bottomed saucepan, bring the maple syrup to a boil over medium-high heat stirring occasionally. Boil until syrup reaches 235 degrees F (110 degrees C) on a candy thermometer. Remove from heat and cool to 175 degrees F (80 degrees C) without stirring, about 10 minutes.
How do you cook maple sap for syrup?
You simply boil the sap until enough water is removed and you are left with pure maple syrup. This process generates a lot of steam so it may be worth doing it outside if you can because your kitchen can quickly fill with steam. Light your stove or turn it on and let your sap boil away.
Is maple syrup healthy?
Yes, pure maple syrup is not only high in antioxidants, but every spoonful offers nutrients like riboflavin, zinc, magnesium, calcium and potassium. According to Helen Thomas of the New York State Maple Association, maple syrup has a higher concentration of minerals and antioxidants, yet fewer calories than honey.
How do you tap a maple tree for syrup?
How to Tap Trees for Syrup Drill a hole. Using a power drill and a sharp bit that corresponds with your chosen spout (see Step 2), bore a 2″-deep hole in a tree with a diameter of at least 10″. Tap the tree. Boil the sap. Bottle the syrup.
