Table of Contents
Mix 2 quarts bleach in 10 gallons of water; pour into well. Connect a garden hose to a nearby faucet and wash down the inside of the well. Open each faucet and let the water run until a strong chlorine odor is detected, then turn it off and go to the next one. Don’t forget outdoor faucets and hydrants.
How much bleach do you use to shock a well?
4) Work out how much bleach will be needed: For every 50 gallons of water in the well use one quart of laundry bleach – (4 quarts in a gallon). Do not use excessive amounts of bleach – more is not more effective.
How long does it take for water to clear after shocking a well?
It will usually take 4 to 8 hours to flush the well after a standard well chlorination. The water may become discolored during flushing because the chlorine may have loosened the hard water deposits in the plumbing. Caution: The chlorine must be completely flushed from plumbing system.
Is it safe to put bleach in well water?
You can disinfect your well with household chlorine bleach such as Clorox, Purex or a generic brand. The chlorine in the bleach kills bacteria. Note that it may take more than one chlorination for your well to return a satisfactory test.
What happens if you put too much bleach in well?
According to AskingLot, if you put too much bleach in your well, it can destroy the good bacteria found in the well, which can be a significant problem! The company also says that you should dilute the bleach with water so the pipes do not get ruined.
How long after bleaching well can I shower?
Do not shower for at least 24 hours after shocking your well. Waiting for one or two days more, if possible, is much better. Chlorine levels in the well water will go down only after freshwater dilutes and replaces chlorinated water. This process can take 1-2 days.
How do you shock a water well with bleach?
Overview. Use ordinary liquid laundry bleach to shock chlorinate the water system. Determine how much bleach to use, then pour the bleach down the well and circulate it through the whole water distribution system. Wait 6-12 hours for the chlorine to work, then flush the chlorinated water from your well and pipes.
Can I put a chlorine tablet in my well?
the well has been flooded or exposed to bacterial contamination in another manner, such as a crack in the well cap. Chlorine granules, tablets and liquid chlorine in the form of household bleach can all be used to disinfect your well.
How do you decontaminate a well?
Rinse the inside of the well casing with a garden hose or bucket for 5-10 minutes. Open all faucets inside the home and run the water until you notice a strong odor of chlorine (bleach) at each faucet. Turn off all faucets and allow the solution to remain in the well and plumbing for a minimum of 12 hours.
Why does my well water turn brown when I add bleach?
The brown is the iron in the water that has oxidized as a result of the chlorination. Normally, the iron in water is in ion form and does not display itself until it combines with oxygen and forms common rust which turns the water reddish-brown.
Should I shock my well?
Wells should be shock chlorinated when a well water sample result shows that there is bacteria in the water. Any time a well is opened for repair it must be disinfected. Newly-built wells should also be shock chlorinated following construction.
How often should I bleach my well?
Homeowners with private wells should have their well water tested every 3 to 5 years for some contaminants, including bacteria. If these tests turn up positive for bacteria, chlorinating the well may be a way to resolve the problem.
How much does it cost to shock a well?
To disinfect your well and eliminate the bacteria, you should chlorinate the well. You can hire a company that services wells to do the chlorinating. The cost ranges from $80 – $200.
How long does it take to chlorinate a well?
Keep an eye on the chlorine level and it will gradually decrease as fresh water makes its way into the well and dilutes the chlorinated water. Keep up this process until all of the chlorine is absent from your well. This process can take 2-3 days.
How do I get rid of algae in my well water?
Use bleach to kill the algae. If you have a problem with algae, you can use bleach to kill it all. The ratio should be one-quarter teaspoon for each gallon in your tank. Bleach is great for killing algae (and other organisms that may lurk in your tanks) and for keeping it from coming back.
How can I naturally purify my well water?
Liquid chlorine in the form of household bleach and food grade white vinegar can be used to disinfect your well. When chlorine is added to water the pH level will rise. Food grade white vinegar is used to lower the water’s pH level so the chlorine will work effectively.
How much chlorine is needed to clean a well?
CALCULATE AND POUR: Pour 3 pints of chlorine bleach per 100 gallons of water plus an additional 3 pints into your well as described above. MIX: Attach a clean garden hose to the outdoor faucet nearest the well and place the end of the hose inside the well.
