Quick Answer: How To Attach Quarter Round Without Nails

Table of Contents

Apply two thin beads of liquid floor adhesive to the sanded side of the quarter-round molding. Align the molding against the baseboard and press it against the wood. Hold the quarter round in place for about one minute to allow the materials to form a bond.

How do you install quarter round molding without nails?

How to install quarter round without a nail gun –using glue (how to install quarter round without nails) Step 1: Measure and cut the molding. Step 2: Prepare the quarter round. Step 3: Apply adhesive. Step 4: Attach the quarter-round. Step 5: Clear any mess. Step 6: Repeat.

Should you glue or nail quarter round?

A: Quarter-round should be nailed to the base boards only. It is intended to hide gaps between the base and floor. It should also permit a little movement in the flooring. Plus, it absorbs the impact of feet and furniture legs, so you may want to replace it sometime—thus, don’t glue it.

Can you attach quarter round with caulk?

Use paintable wood putty to fill in any nail holes or noticeable gaps. Caulk is an alternative to putty if you installed quarter round with a white finish. Use it sparingly to fill gaps or nail holes and wipe it with a wet fingertip or rag to make it smooth.

How do you install quarter round without a brad nailer?

Step 1: Cut molding. Step 2: Lay molding against wall, flush with the floor. Step 3: Hammer your finishing nail almost all the way into the wall. Step 4: Use the nail set to drive the nail the rest of the way in. Step 5: Finish with sealant. Step 6: Cover nail heads.

What nails do you use to install quarter round?

Attaching Quarter Round Because it’s finish trim, install quarter round with finish nails, which have smaller heads than standard nails. A finish nail gun, fitted with 1.5- or 2-inch finish nails, works well. You can also drive finish nails the old-fashioned way — with a hammer.

Can you install quarter round without baseboard?

Sure, you can use quarter round without a baseboard as long as the crack you’re covering stays behind the quarter round. It is a plain, simple, clean look.

Can you install trim without a nail gun?

Your local big-box hardware store carries molding in all different styles, and they’ll cut it down for you to the exact sizes you need. Installing it is as simple as buying a box of itty-bitty finishing nails and hammering in the molding. Seriously, you do not even need a nail gun.

Do you put quarter round on baseboards?

If you’ve been looking at baseboard finishing trim, you’ve probably discovered quarter-round, too. While quarter-round can be installed along the bottom of baseboard, trim carpenters and homeowners tend to prefer the sleeker look of shoe molding, which is taller and narrower than its curved counterpart.

Can you nail baseboard with hammer?

Nailing baseboards with a hammer is generally the same process; however you will be purchasing nails designed to be used with a hammer, and you will probably want to purchase several different sizes of nail sets to help insert the nail into the wall.

Can you use a hammer for finishing nails?

Use a nail set that is the same diameter as the finishing nail. Center it on top of the nail and hit it with the hammer. Continue hammering until the nail is about 1/8-inch below the surface of the wood.

Is shoe molding the same as quarter round?

Quarter round is another moulding style typically paired with baseboards to cover up gaps and imperfections between the base and the floor. As such, it essentially has the same purpose as shoe moulding. However, this style of moulding is always shaped like a quarter of a circle, hence the name.

Can you hand nail quarter round?

Quarter-round covers small gaps between the baseboard molding and the floor and offers some aesthetic appeal. When replacing quarter-round, many contractors use a nail gun and compressor. However, most homeowners only require simple hand tools to nail quarter-round baseboard trim.

Should quarter round touch the floor?

It should match the flooring or match the baseboards. Buy bare wood quarter round and stain it to match hardwood floors. You could also buy primed quarter round, which is flat white, and paint it with semi-gloss paint to match the baseboard.

How do you attach shoe molding without nails?

Do you paint quarter-round before installing?

Many experts say that it’s wise to paint the trim before you install it. You can easily use a paint roller or spray painter to paint trim before installing it. The advantage of this approach is that you won’t have to worry about getting any of it on the wall, floor, or surrounding area. You simply paint and go.

What can I use as a clamp?

If you find yourself in a pinch without a clamp (no pun intended), maybe you have one of these alternatives around the house: a pair of pliers with a strong rubber band or tube rubber tied around the handle.

Can I use Liquid Nails for baseboard?

These Liquid Nails products are rated for use with most interior trim and molding types.

Can I use brad nails for quarter round?

For the most part, the best tool for nailing quarter-round is a brad nailer. Brad guns shoot thinner nails from the smaller 5/8-inch to 2-inches, which are fine for attaching light moldings such as quarter rounds – you don’t want to split the molding or leave visible holes.