Table of Contents
Step by Step Procedure Step 1 – Rip off a piece of masking tape and tape it to the bottom of your power strip. Step 2 – Take your pencil and mark the masking tape. Step 3 – Take your drill and screws. Step 4 – Remove the masking tape. Step 5 – Mount your power strip on the wall.
How do you mount a power strip to a wall without screws?
Attach Beta steel tape to the power strip Place the power strip on a hard surface with its back facing you. Remove the liner from the first Beta Steel Tape and place it on the power strip so that the left of the Beta Steel Tape touches the “L” mark on the left edge of the power strip.
Is it safe to mount a surge protector on the wall?
To ensure neatness and to avoid cable disconnections, Belkin Surge Protectors are designed in a way that mounting is possible. Belkin Surge Protectors can be mounted to walls and baseboards. Use the two mounting holes on the back of the Surge Protectors to secure it to your wall or baseboard.
What screws to use for mounting power strips?
#8 wood screws seem to work with most key hole slots but if they are too big, use #6 screws. You may need to play around the depth of the screws a bit to make sure they all fit into the key hole slots but are snug doing so. Place it over the screws and slide it in place and you’re done!.
Can you hang a power strip with Command Strips?
I’ve been mounting my power strips to the wall with 3M Command Strips. The power strips in my bedroom are the ones that make me the most nuts, they do look sloppy, but also, they slide under furniture and I can never reach them, and they always trap a nest of dust and dog hair.
Do magnets affect power strips?
If it’s a good quality powerstrip all of the internal components should be brass so the magnets won’t affect them and that low magnetic force won’t interfere with electricity.
Can you hang a power strip on the wall?
A power strip should be plugged into the wall outlets directly, so make sure its cord length is long enough to reach the nearest wall outlet. The mounting height depends on where you are using the power strip.
How can I hide my surge protector?
The easiest way to hide a power strip is to obscure it behind furniture. Set the power strip behind the TV stand, desk, or sofa that it’s next to. Simply slide your furniture out a few inches to give the power strip some space for air flow and keep it from resting directly against any furniture.
How do you attach a power strip to the wall?
Step by Step Procedure Step 1 – Rip off a piece of masking tape and tape it to the bottom of your power strip. Step 2 – Take your pencil and mark the masking tape. Step 3 – Take your drill and screws. Step 4 – Remove the masking tape. Step 5 – Mount your power strip on the wall.
What are number 6 screws?
American Screw Sizes THREAD DIAMETER Size Nearest Fraction Inch #5 1/8 0.12 #6 9/64 0.13 #8 5/32 0.16.
Can I connect a power strip to a surge protector?
A surge protector can be used for any reason that a power strip can be used for. Not only will a surge protector keep these expensive devices alive, but they’ll also allow you to plug in many devices in a small area.
Are some surge protectors better than others?
A higher joule rating is the best indicator of greater protection. Choose a surge protector with a joule rating at the very least in the 200 to 400 range. Sensitive or costly equipment, such as computers, displays and audio/video equipment, warrants a joule rating of at least 1000.
How do you put a surge protector under a desk?
You can attach the surge protector under any desktop and face it in the direction that suits your office needs. If you opt to use the included brackets, you can mount the surge protector to the underside of the desktop, giving you the option to face the outlets towards or away from you.
How do you stick extension cord to desk?
2. Mount extension leads to the back of the desk. Before you start plugging any wires or cables back in, fix your extension lead to the back of your desk with VELCRO® Brand Heavy Duty Tape. This will keep your extension lead out of sight and you’ll be able to peel it off easily whenever you need to.
What should you never plug into a power strip?
10 Things Never to Plug into a Power Strip Refrigerators and Freezers. 1/11. Microwaves. 2/11. Coffee Makers. 3/11. Toasters. 4/11. Slow Cookers and Hot Plates. 5/11. Hair-Care Appliances. 6/11. Portable Heaters and Air Conditioners. 7/11. Sump Pumps. 8/11.
Why do power strips go bad?
Extension cords and power strips: While extension cords and power strips don’t come with an expiration date per sae, they do have a limited lifetime use. These items are only designed to handle so much juice over the years and will eventually short out or lose effectiveness.
What can you not do with a power strip?
9 Things You Should Never Do With Power Strips Never Plug a Power Strip Into Another Power Strip. Never Use Indoor Power Strips Outdoors. Never Overload a Power Strip. Never Put a Power Strip Under a Rug. Never Plug Beauty Tools Into a Power Strip. Never Use a Damaged Power Strip. Never Get a Power Strip Wet.
Does a TV need a surge protector?
You don’t need a surge protector for your desk lamp or your standing fan, but you do want a surge protector for expensive devices that have intricate microprocessors, like computers, televisions, stereo systems, and media centers. In short, anything electronic and expensive benefits from a surge protector.
Do wall outlets have surge protection?
They’re usually small and thin, sometimes fitting directly into the outlet itself. They usually have a circuit breaker (on/off switch) of some sort, but most don’t offer any real “protection” from electrical issues.
How do you hide the surge protector from behind a TV stand?
Use Cord Clips to Hide Your Wires Behind a TV Stand All you need to do is place these cord clips around the back of your furniture and snake your wires around to your surge protector or other devices. This will also help you keep your cords organized and stop them from getting tangled up.
