Table of Contents
How to Arrange Gas Logs Place the largest ceramic logs on the bottom to serve as the foundation for the fire. Leave 2 inches (5 centimeters) between logs. Make sure none of the logs is blocking the gas flow. Arrange smaller logs on top of the foundation logs.
Does log placement matter in a gas fireplace?
Gas fireplace logs, coals and other forms of media must always be arranged inside a gas fireplace in line with the requirements set by the manufacturer in the instruction manual. Arranging gas fireplace media in an incorrect order can be a safety hazard and can also affect flame performance and increase sooting.
How should logs be placed in a fireplace?
In the same way as the kindling was stacked, the logs should be stacked on a fireplace fire so that they’re: Leaning on each other; Without being too closely packed together, or; Without being spread too far apart that they’re not touching.
How often should gas logs be replaced?
A general rule of thumb when it comes to ceramic propane gas logs is this: a vented log set that has been regularly maintained can last for at least ten years, while a vent-free set with the same regular maintenance will show signs of wear between three and five years if the fireplace is used frequently.
How can I make my gas logs more realistic?
Use vermiculite instead. You can find rock wool, silica sand, vermiculite and crackling ash granules at a fireplace supply store or order online. You may need to turn the fireplace off and shift the rock wool around until it resembles a realistic pile of embers.
Why are my gas fireplace logs turning black?
Soot buildup is commonly caused by clogged burner ports and improperly positioned fire-logs. A fire-log that’s out of position can obstruct the flame path that ensures the clean-burning of gas. This contributes to soot formation on the fireplace. If this happens, you’ll need to clean off the fire-logs and doors.
How do you arrange stones on a gas fire?
The pebbles should be positioned so that the arrows always point towards the back of the fireplace opening. When located into position the stem of each arrow should be at 90° to the rear of the fireplace opening (See figure 3). 5. Hold pebble ‘1’ upright with the arrow pointing to the top.
How many logs should I put in my fireplace?
Depending on how you choose to build your fire, four to six logs should be sufficient in creating a warm, long-lasting fire in your fireplace. If your fireplace is tall, then you can stack more if there is room.
Can I use a gas fireplace without logs?
You can use a gas fireplace without logs because the heat source is the burner connected to your gas line. Don’t use wood in your gas fireplace, as they weren’t built for wood to be their fuel source. Instead, use a ceramic log in your fireplace for additional reflective heat.
Do chimneys with gas logs need to be cleaned?
While gas fireplaces don’t produce creosote, they do still need annual cleaning. A chimney sweeping in your gas fireplace will help remove items like bird’s nests, animals, and any debris that may have gotten trapped in there as well any potential soot. Furthermore, a chimney sweeping is often also an inspection.
Do gas fireplace logs go bad?
The lifespan of your gas logs will vary depending on their design, the quality of their construction, and how often you use the fireplace. With proper maintenance, a vented set of ceramic logs can last ten years or more. Unvented logs have an average lifespan of three to five years.
What do you put under gas logs?
Supplies Needed To Freshen Up Your Gas Fireplace Silica Sand (not needed for a propane fireplace) Vermiculite (optional for natural gas fireplace) Rock Wool. Platinum Embers (optional for more dimension) Lava Rock.
What does vermiculite do in a gas fireplace?
Coarse grade exfoliated vermiculite that used in gas log fireplaces. By pouring into the burner pan, vermiculite granules add sparkle and shine to the fireplace for a real wood burning effect and evenly distribute the flame.
What is the most realistic looking gas fireplace?
Peterson Real Fyre Gas Logs are the most realistic gas logs because they are meticulously hand-crafted to resemble natural wood and carefully designed and arranged to produce a flame that looks just like a real wood fire.
Where are the air intake shutters on a gas fireplace?
If your fireplace has glass doors on the front, there may be a section of air intake shutters along the bottom. These shutters need to be open whenever a fire is burning in the firebox. They also need to be clean.
Which is better vented or non vented gas logs?
Ventless fireplaces are more energy efficient than vented fireplaces because no heat escapes up the flue, so you’ll save money on gas utility bills. A vented gas fireplace uses more gas to create the same level of warmth because some of its heat escapes through the flue.
Where do you put Rockwool in a gas fireplace?
Decorative ROCK WOOL is used on VENTED gas logs or to replace the wool on DIRECT VENT GAS FIREPLACES. Rock wool is a fibrous material made from minerals. Placed on top of the sand in a natural gas log set, the fire passes through it, becomes red hot and glows without melting or burning.
Where does the glowing ember go on a gas fireplace?
Real burning embers (coals) found in the bottom of a campfire are small chunks of wood that are still smoldering. Not only are they pretty, they help to distribute the heat around the fire evenly. Artificial burning embers are designed to be placed underneath the burner in your gas fireplace.
Can you use gas fire without coals?
as long as you meet ventilation requirements, there is no need to put the coals on. this is only a DFE fire.
Can I change the coals on my gas fire?
Well surprisingly yes. On some gas fires, you can indeed change the fuel bed effect. The new Icona hole in the wall fires has a variety of different effects including fuel beds, logs, driftwood, coals and pebbles.
Can I install gas logs myself?
Gas log installation should only be done by a certified professional. Homeowners should never install their own gas logs unless they have the tools and training to do so.
What are the fake logs in a gas fireplace made of?
A: Most gas logs are made from a ceramic fiber or refractory cement mixture designed to withstand high temperatures. Sometimes steel reinforcement bars are added to the inside of the logs to increase their strength and to prevent them from bending or cracking under extreme heat.
What do you put in the bottom of a gas fireplace?
Silica sand is used in the bottom of the burn pan of VENTED NATURAL GAS log sets. The gas is dispursed though the sand spreading it around before it is ignited. This gives you more flame action in your gas logs. Replace the sand every few years to keep your flames dancing.
