Table of Contents
How to Arrange Gas Logs Place the largest ceramic logs on the bottom to serve as the foundation for the fire. Leave 2 inches (5 centimeters) between logs. Make sure none of the logs is blocking the gas flow. Arrange smaller logs on top of the foundation logs.
How should logs be placed in a fireplace?
The Chimney Safety Institute of America recommends that this layer of logs be placed in a fireplace with the ends facing towards you. These logs should be packed tightly together horizontally so that the fire can be easily transferred between them when the flames reach this layer.
How do you use ceramic logs?
These logs can be placed in many different types of fireplace spaces. The pipes pump invisible gas through holes in the logs. When the gas logs are ignited, the ceramic logs will produce a steady flame. As propane or natural gas is pumped through the pipes, it burns harmlessly on the surface of the ceramic logs.
How do I arrange my gas fire coals?
‘The coals must not be crammed together, or inserted into the holes in the matrix. A well laid out, generously spaced coal layout will give the best results. When lit the flames should not be hitting the sides of the firebox, if so adjust as necessary. No coals should be directly above a flame port.
How do you put firewood in a fireplace?
Start by placing two pieces of firewood on the grate in your fireplace. Now crumple newspaper, which is your tinder, and place it between the firewood. Place the kindling on top. Add one or two more pieces of firewood on top of the other logs, and be sure to leave enough room for air to circulate around the logs.
What is the purpose of ceramic logs?
Refractory ceramic gas logs are made of a mixture of cement and ceramic, which allows them to give off more heat than other types. They tend to last longer and are more durable than other options thanks to their ability to withstand very high temperatures. They can be used in both vented and ventless fireplaces.
Can you burn ceramic logs?
Ceramic fiber logs are better at resisting flame damage and some glow when heated. But they do break down with age, and they don’t look quite as realistic. You can buy vented logs for gas fires and burn those in any fireplace that’s designed to burn wood, as long as it has a gas line.
How do you place rocks in a gas fireplace?
To place the rock wool, grab some tongs and carefully pull small pieces out of the bucket and onto your vermiculite. Your gas logs will lay on your burner pan, so make sure to have the rock wool almost hanging off the edges. This will ensure you can see more “coals” when your fire is burning.
How do I arrange my gas fireplace logs?
How to Arrange Gas Logs Place the largest ceramic logs on the bottom to serve as the foundation for the fire. Leave 2 inches (5 centimeters) between logs. Make sure none of the logs is blocking the gas flow. Arrange smaller logs on top of the foundation logs.
Can I change the coals on my gas fire?
Well surprisingly yes. On some gas fires, you can indeed change the fuel bed effect. The new Icona hole in the wall fires has a variety of different effects including fuel beds, logs, driftwood, coals and pebbles.
Do you need to replace gas fire coals?
Sometimes it’s necessary to change gas fire coals, ceramic logs or pebbles as they become discoloured or worn. Gas fire manufacturers will normally insist on their specific brand of coals to be used on their gas fires claiming it is unsafe or reduces the heat efficiency of the fire.
How do you keep a fire going all night in a fireplace?
11 Ways To Keep A Fire Going In An Open Fireplace Ensure That The Damper Is Fully Open. Warm The Chimney. Maintain The Air Supply. Build The Fire Correctly. Only Burn Wood That Is Dry Enough. Burn Room Temperature Wood. Burn Hardwood Logs. Add A Couple of Logs At A Time.
Can you put too much wood in a fireplace?
Stuffing your fireplace or woodstove with too much wood will likely lead you to damp down the fire, which may cause smoldering and inefficient burning. Some woodstove owners try to achieve overnight burns by closing the damper in their woodstove. Without enough oxygen the fire will generate too much smoke.
How do I open my fireplace?
To build a fire using the top-down method, place a layer of your largest sized logs a the base of your fireplace or grate, and then lay another row of smaller sized logs on top. Kindling can then be added on top of the logs and then your preferred fire starter such as newspaper placed at the top of the fire.
How do you start a fire in a fireplace without smoke?
How to Start a Fire with Less Smoke Use the right firewood. Open the damper. Avoid fires on windy days. Build a top down fire. Call a chimney sweep.
How do you open a fireplace flue?
You should turn the knob clockwise, as far as it can go, or push the rod all the way up to open the damper. If there is a metal chain in or besides your fireplace, it means that your chimney has a top-mounted damper. If the chain is tightly attached to a hook, the damper is closed.
Do ceramic logs need to be replaced?
A: In the average home, a well-maintained vented log set with ceramic logs will last 10 or more years. A well-maintained vent-free log set with ceramic logs can also last a long time, but, if heavily used, will begin to wear in 3-5 years.
Why are my ceramic logs turning black?
The most common causes of soot buildup in a gas fireplace are ceramic fire-logs that have been moved out of proper position and burner ports that are clogged. The other main cause of soot is clogged ports on the gas burner, which causes an incomplete or unbalanced burn and formation of soot on the logs and doors.
How do you use fake fireplace logs?
Imitation logs are quite different from actual wooden logs. While wooden logs can be stacked within the fireplace, imitation logs can only be burned one at a time. Imitation logs are quite easy to burn. Simply stick one in the fireplace and light it.
