Table of Contents
Stain the Deck Boards Don’t stain yourself into a corner. Stain the deck boards using a paint pad applicator. Apply one coat of stain in long, even strokes. Use a paintbrush to stain between cracks and in any problem areas. Once you’re finished, clean the brushes and paint tray.
What is the best way to apply decking stain?
Deck stains can be applied in several different ways. Using a pump-up garden sprayer and roller are two popular methods. Regardless of how you apply your wood stain, keep a paint brush at hand. A paint brush will work the stain deep in to the pores of a board.
Is it better to brush or roll stain on a deck?
You should use a roller brush or sprayer to apply a steady coat of quality stain, such as Olympic Elite stains or Olympic MAXIMUM stains. If you see that too much wood stain has been used in an area, use a roller or brush to fix the imperfections.
Do you wipe off deck stain?
Wipe Down the Stain You need to make sure you wipe down the deck with a cloth rag within 15-30 minutes to remove any excess sealer. If you don’t do this, you can end up with a sticky deck and no one likes that. Allow the stain to dry a day or two before you moving furniture back and using the deck again.
Should you pressure wash deck before staining?
There is a common misconception that just pressure washing a deck prior to staining is all you need to do in order to prep your deck for stain. Pressure washing can help, but if you want your stain to last, using a good deck cleaner and brightener on the deck prior to pressure washing will provide you the best result.
How many coats of stain should you put on a deck?
The general rule of thumb is to apply only as much deck stain as the wood can absorb. Typically this will be 2 coats, unless your dealing with extremely dense hardwoods which may only be able to absorb 1 coat of wood stain.
When should I stain my deck for the first time?
You can stain a new deck immediately after installing your deck, but this is not the best time to do it and here’s why: the lumber is still too wet. The best time to stain a new deck is 3 to 12 months after installing it.
Do you need to sand a deck before staining?
Once dry, these wood fibers can remain raised and may cause splinters. For this reason, light but thoroughly sanding your wood deck is a necessary step before staining or sealing. This crucial step will ensure that your refinishing job gives great results.
How do I know if my deck is dry enough to stain?
Another way of checking if your wood is ready for stain is to pour a little water on the wood. If the water beads up, the lumber still too wet to be stained or painted. If the water is absorbed into the wood easily, it’s ready to be sealed or stained.
How soon can you walk on a deck after staining?
In most cases a full body stain or acrylic deck finish will be dry to touch within an hour in dry, hot weather. After two hours you could take a chance and walk on it with shoes, though I’d recommend barefoot. After about 4 hours you should be able to safely walk on your deck.
Can you stain a deck over multiple days?
Ultimately you want two set aside at least two days. If you need to power wash your deck or replace any boards it may take you an extra day or two. It is ideal to stain your deck in a season that experiences mild temperatures. The direct sunlight can cause the deck to dry too quickly which will leave water marks.
What happens if you don’t wipe off wood stain?
Wood stain is designed to penetrate into the grain of the wood, not to remain on the surface. If you happen to spread it too thickly, or you forget to wipe off excess, the material that remains on the surface will become sticky.
How many dry days do you need to stain a deck?
New wooden decks should always receive a coat of paint or stain. Generally, all new decks should dry out for at least 30 days before stain or paint is applied. Although a finish can be applied immediately after construction, more work is involved, so it’s best to let the wood fully dry before finishing.
Is it better to sand or power wash a deck?
Splintered, cracking, or just plain rough wood should be sanded first, then pressure washed to open the wood’s pores and allow penetration of the stain. Deeply grooved wood that has mold, moss and other growing things filling the cracks will need treatment with a deck and siding cleaner.
How long do I need to wait after washing my deck to stain it?
After a deck has been power washed it will have some retained moisture within the wood. It’s important to let the wood dry thoroughly so none of the water that soaked into the wood gets trapped under the stain. In perfect drying conditions, 48 hours is enough for the wood to get to where it needs to be before staining.
Do I have to wait 4 hours between coats of stain?
For a deeper color and sheen, wait one hour and apply a second coat. After 1 hour, the surface is dry to the touch. Wait overnight before subjecting the wood to normal use. For a deeper color and sheen, wait one hour and apply a second coat.
Can you use a roller when staining a deck?
Short Answer, Yes. But there are some other things to consider when using rollers or sprayers. Rollers are a great way to apply wood stain as well for the speed at which you can apply the stain. However, when using rollers can be a disadvantage when you have hard to reach areas.
How do I know if my deck needs a second coat of stain?
A good rule of thumb is to lightly touch the portion that has been stained. If it feels tacky to the touch (a little sticky and not wet) then you can apply the second coat.
