Table of Contents
Kinetico water softener comes with an adjustable mechanism mounted on the water softener head. Take the screwdriver and turn the screw gently clockwise. Notice tab reaches to black indicator dot in Brine Position. It will reset the water softener and start the regeneration process.
How do I adjust the hardness on my water softener?
Press the UP or DOWN buttons to set your water hardness number. NOTE: If your water supply contains iron, compensate for it by adding to the water hardness number. For example, assume your water is 20 gpg hard and contains 2 ppm iron. Add 5 to the hardness number for each 1 ppm or iron.
How do I know if my Kinetico water softener is working?
You should hear at least five “clicks” while turning the screw before the indicator dot reaches the “BRINE” position. At this point you should hear water begin to run through the system.
How do I set the regeneration time on my Kinetico water softener?
Using a #2 Phillips screwdriver, push down firmly on the softener valve screw and slowly turn clockwise to start the regeneration. At this point you should hear water begin to run through the system.
Why is my Kinetico water softener using so much salt?
Why is my Kinetico water softener using so much salt ? Leakage in the valves is the most common problem in the water softener that pours excess water into the tank. When the water overflow above the brine tank system, the water enters the salt container.
What should I set my hardness level at?
What is the Ideal Water Hardness? 0–3: If your hard water test strip indicates that your water is between 0–3 grains per gallon, your water doesn’t require softening. 3–7: Water between 3–7 gpg is moderately hard, causing spotty dishes and dry skin.
What is a good water hardness setting?
An acceptable level range for water hardness is going to be 100- 300 PPM depending on what city you live in and what the water treatment plant has decided on.
What happens if your water softener is set to high?
Soft water provided by a utility does not need additional softening and may cause corrosion issues for your home. Make sure the softener is set to the hardness of your water supply. If the hardness is set too high, the softener will cost more to operate and waste water, costing you extra money.
How much salt does a Kinetico water softener use?
If sized correctly, it is not uncommon for our Kinetico customers to use only 3 to 6 bags of salt per year! Homes with more residents or more hardness will use 6 to 12, and of course homes with extreme water conditions will use more.
How often should water softener backwash?
Typically, the regeneration should occur after every 12 to 14 days or it should occur after a predetermined gallons of water that you use. You can set the number of gallons used before it regenerates through the water softener’s valve.
How long do Kinetico water softeners last?
Water softeners can last 10 to 20 years, depending on the type and quality you buy. On average, a single tank electric water softener could last you up to 12 years, while a Kinetico system can last as many as 20 years.
Does it hurt your water softener to run out of salt?
Water softening salts are essential to treat water and maintain the high performance of water softeners. When the water softener runs out of salt, it can cause long term damage and harm your water fixtures. It can even result in tank overflowing.
How long does it take a Kinetico water system to regenerate?
This will usually take around 30-60 minutes depending on the size of your softener. It will not advance to the second tank until sufficient water has been run through the unit. To regenerate the other tank, simply move the disk post to the other tank’s Brine Rinse position.
How do you adjust the backwash on a water softener?
How to Perform a Manual Backwash on a Water Softener System Press the “Select 1” or similar button until “Clean” and “Off” appears on the display. Press the “Up” or “Down” button until the text “On” appears. Press “Select 1” again until “Clean Time” and “7” appears. Seven minutes is the default extra backwash time.
How do I adjust my water softener to use less salt?
Another method for adjusting the salt dose or the amount of salt used during a water conditioner backwash/regeneration cycle [on some water softener models] involves adjusting the float level inside the brine tank. Explanation of this feature has moved to WATER SOFTENER BRINE TANK FLOAT LEVEL ADJUSTMENT.
How long does a 40 lb bag of water softener salt last?
Your salt consumption will depend on the level of water hardness (minerals in your water) and the amount of water your household consumes. The average family of four with hard water (7-10 grains per gallon hardness level) will use about one 40-lb bag of salt each month.
How do I know if my water softener is working properly?
How to tell if your water softener is working Check if your “softened” water is still easy to lather. High-quality laundry work. Clean pipes, faucets, toilet, tiles, and sinks. You still experience the unique taste of soft water. Leaks. No regeneration cycles. Low pressure. Resin beads problems.
Is 25 ppm hard water?
You can convert among water hardness measures. Water with hardness of 25 ppm = 25 mg. of hardness-causing minerals per liter of water.
Is 50 ppm hard water?
Water hardness is usually expressed as the number of parts per million (ppm) of calcium carbonate present in the water (see Table 19).77 Water Hardness and pH. Type of Water Hardness Soft water 10-50 ppm Slightly hard water 50-100 ppm Hard water 100-200 ppm Very hard water Over 200 ppm.
