Table of Contents
Mix one tablespoon of metal flakes per one quart of clear coat. Stir the metal flake and clear coat until completely mixed. Pour the metal flake mixture into a paint sprayer. Make sure that all parts and tubing of the paint sprayer are clean to avoid residue from a previous paint job ruining your project.
How do you add Flake to paint?
Just choose your base coat (black is good if you want the paint to take on the color of the flakes), and add a heaping tablespoon of our flake to any clear coat (although we recommend a base clear for mixing the flake into, like PPG’s DBC-500, or HOK’s intercoat clear). Knockdown isn’t even an issue with our flake.
How do you add metal flakes to spray paint?
To create this type of paint, mix metal flake powder into a thinned-out clear paint base. Once you’ve poured this paint mixture into your paint sprayer, apply the mixed paint to your desired surface. Apply at least 2 coats of paint until you achieve your desired color!Nov 18, 2019.
Can you add metal flake to clear coat?
Adding metal flake to a clear coat gives it depth and sparkle, making it a great choice for painting. Dry the paint after it has dried. Make sure the metal flake is coated with a clear coat. Clear coats can be used in any situation.
Can you airbrush metal flake?
Micro Flake can be sprayed through most medium tip sized Airbrushes and Full and Detail Sized Spray Guns with a 1.3 nozzle set-up or larger.
Do you need a special gun to spray metal flake?
Gravity guns and siphons work well for applying flake, but you’ll need to adjust the gun tip size to the type of flake used. The chart below provides a great overview of the size of the metal flake and the corresponding paint gun tip required.
How much metal flake do I need?
The rule of thumb is two teaspoons of ‘flake per quart of clear.
How do you mix metallic car paint?
Although ratios vary widely across several products, solvent based metallic paints are mixed in the ratio of 2:1 (2 parts paint: 1 part thinner) while water based paints are mixed with a 10 percent additive. Remember, this additive also needs to be water based.
Can you add metallic to car paint?
If you want to further customize your paint you can also add metal flake directly into the paint or into a mid coat clear to add some shimmer to your paint job. Large flake rich paint or clears may require a larger tip than plain paint or clear coat due to the amount and size of flakes passing through the paint gun.
What do you mix metal flake with?
The most concerning is the seemingly rough surface created immediately after applying flakes. Flake application requires a few more coats of paint and some sanding, but hopefully you can do this without much problem. TIP#1: Flakes should be mixed about 1-2 tablespoons per mixed quart of clear.
What psi do you spray metal flake?
Again, to get a good clear coat atomization, you want to paint at 29-30 psi. Use the light and make sure it’s laying on glossy. If you want to, you can let it cure for a couple of days. Then, wet sand it with 1000-grit and lay an additional two coats of clear.
What is holographic metal flake?
Holographic Metal Flakes Our Holographic flakes are fine cut hexagons with no sharp corners and lots of sparkle. Great way to get a linear multi-colored sparkle on your project. Lots of colors to choose from. Nice base colors with a multi-color linear reflection.
How much is a metal flake paint job?
So, the first paint without bodywork may be in the $1000 to $2000 range, then there is the flake which would easily be another $1000, then there is the clear and the leveling which takes an incredible amount of labor. An “all over” metal flake job, again with no body work, would easily be in the $5,000-7000 range.
Can you add Pearl to single stage paint?
Most of the pearl will be buried in the single stage paint to where you won’t see most of the pearl. Paint it like any other color, metallic or not. Normally any SS with pearl in it requires a clear coat for UV protection. but yes spray it like a metallic.
What is a dry flake gun?
This dry flake gun was developed to apply dry metal flake to a wet coat of clear or other mediums including water-born products! No mixing more then you need simply spray your inter-coat/clear and follow up with the Dry Flake Gun for greater control and accuracy.
How do you add glitter to car paint?
Glitter in auto paint is added by either adding some metal flake to the paint or by using a metallic paint color.
What is the difference between metallic and metal flake paint?
Metallic paints may be generically referred to as metal-flake paint, but a specific variation uses larger flakes of metal that are individually visible. Flakes with different colour effects may also be used within the same paint.
Can you put Pearl in clear coat?
When spraying clear coat, you want to make it glossy and have that wet look. If you have the hang of spraying, adding pearl to your mid clear coat followed by some plain clear as a last coat is a great way to go. I have also sprayed pearl in clear without an additional top coat of clear with amazing results.
