Table of Contents
If your nightstand is too low, you can: Add a drawer topper to the nightstand to make it higher. Fit furniture risers to the nightstand. Use another piece of furniture, such as a flat chest, to raise the nightstand. Finally, you could pay a competent carpenter to craft new legs to raise the nightstand.
How tall should a nightstand me?
Proper Nightstand Height As a general rule of thumb, the top of your nightstand should be level with the top of your mattress, or about 2-4” taller. It’s much easier for somebody to reach above to grab something when they’re laying on the bed, as opposed to reaching below.
How do you put legs on a nightstand?
Mark where you want your wooden furniture legs and pre-drill holes. If you don’t have enough work space for the legs, you’ll need to add a small piece of wood to the underside before attaching the legs. Next hammer in your Tee nuts into your pre-drilled holes. Then screw the furniture legs into the Tee nuts.
How can I make my side table look taller?
You can add lifts, feet, or extensions to your table legs to make the table taller. Wooden extensions can be added to your wood table to add height to the legs. Alternatively, you can replace your table legs entirely to make sure you get the height that you want.
Do nightstands have to be the same height?
First, think about the scale and height of nightstands in relation to the bed. And, while many people opt for matching nightstands, that’s not absolutely necessary. That’s the traditional approach, yes—but as with all design traditions, rules are meant to be broken!Oct 4, 2020.
How far away should nightstand be from bed?
Your bedside table should be within reach of your bed. Spacing in a room is important, so it should be at least one or two inches from the side of your bed, level with your mattress, or a few inches taller. However, it can be further depending on your reach and your personal design preferences.
Can I add legs to furniture?
All you need to do to attach the legs is screw them into the hole in the center of the mounting plate. It’s pretty easy to do this by hand. It just takes a little time and a little muscle. Once the legs are attached the bottom of your furniture, you’re ready to flip that baby over.
How do you extend the height of a table leg?
Maybe the easiest solution to gain table height is the addition of a finial. This type of ready-made leg hardware attaches to the bottom of the leg to add a few inches. They come in different shapes and length. Choose one you like, tip the table upside down, drill pilot holes in the ends of the legs and screw them on.
How do you make a DIY table taller?
How to Make a Desk Taller – 5 Easy and Affordable Solutions Use Risers. Using furniture risers is the most common method to add extra height to tables and desks. Add Bun Feet. For wooden tables, you can use bun feet to raise the height of the table. Get Wooden Extension.
How do you raise the height of furniture?
Cut two two-by-four studs to that length. Stack the studs on top of each other with glue between them. If you stack two of them, you’ll raise your couch about 3 inches; use more studs to raise it higher. Cut hardwood plywood strips 3/4 inch taller than the accumulated height of the stack and nail them on four sides.
Can my nightstand be lower than my bed?
RULE: 24”-27” is the ideal height for a nightstand but just keep the height 5″ higher or lower than the top of your mattress. Ideally, your nightstand will be around the exact same height as the top of your mattress so that you can easily access it.
Should your bedside table be higher or lower than your bed?
The ideal height for a nightstand or bedside table is roughly even with the top of the mattress, i.e.; the sleeping surface (see below). Give or take a few inches, you want the top of the table to be level with the mattress, making it easy for you to reach and creating a clean sightline across the bed.
Should my nightstand match my bed?
Matching nightstands is the best option to begin with. Nightstands are smaller in proportion to the bed, or a wardrobe. As long as the bed is central and of a different style and finish it will break the pair up. Saying that, you do not have to match your nightstands.
What can I use instead of a bedside table?
7 Chic Alternatives to a Bedside Table A Bar Cart. Kelly Zugay. One Kings Lane. A Garden Stool. Style Me Pretty. Little Green Notebook. A Floating Shelf. HGTV. Decorative Bedroom. A Single Chair. Smart Furniture. Justine Taylor. A Desk or Vanity. My Domaine. Cobi Style. A Stack of Books. McGrath II. A Vintage or DIY Ladder. Remodelista.
Can nightstands go in front of windows?
A large nightstand will naturally look good in front of a window because it will fill up the entire space and give it a proportional feel. Versus a small nightstand in front of a window might look out of place. I would say 30 to 32 inches should be the maximum height for a nightstand in front of a window.
