Table of Contents
Can you add eyelets to curtains?
2) Fold under 2cm at the top of the curtain panel and lightly iron. Pin the eyelet tape along the top edge of the fabric and sew into place. Draw around the inside of each ring with a fabric pen, then cut out these circles to create the eyelet holes. 3) Press the eyelets into place at the front of the curtain.
Is it hard to make grommet curtains?
Grommet curtains are simple to construct, don’t require a large amount of fabric, are easy to install and operate, and look great with all types of fabrics and interiors.
How far apart do you put grommets on curtains?
Generally, grommets are spaced about 6 inches apart on center. The first and last grommet are inset the space needed for the return to the wall, and in front of the window at the leading edge.
How do eyelet curtain rings work?
Eyelet curtains, also referred to as “grommet curtains,” have holes along the top edge. The way that they are woven onto a curtain rod creates beautiful folds in the fabric, which can make just about any room appear more grand and formal.
How do I sew curtain rings?
Sew curtain rings to the backs of the panels, attaching them at the hem line at the top, using a technique called tacking. With needle and thread, make two or three stitches in the same place, one on top of the other, then secure them with a back stitch. Do not sew through to the outside layer of the curtain.
What can I use instead of grommets?
A webbing loop is a great alternative to a grommet for things like sails, tie downs, fabric covers and more. Webbing loops are very useful, and they even have some added benefits versus installing grommets.
How high do you hang 84 inch curtains?
The length of the curtain dictates the height of the rod. If you buy 84-inch-long curtains, the rod must be mounted roughly 84 inches from the floor if the curtains hang from the rod without rings. This lets the hem of the curtains brush the floor.
Do you need a tool to install grommets?
The actual grommet installation “tools” can consist of a single grommet plier, or a combination of a setter and anvil. Grommet Pliers are normally used for small grommets and eyelets. For larger grommets, as we mentioned above, you use a setter and anvil to exactly match the size of the grommet.
What is the difference between an eyelet and a grommet?
An eyelet is a small piece of metal that is used to reinforce a hole in a piece of fabric; usually made of brass. Grommets are very similar to eyelets, because they are used to reinforce a hole as well; however, grommets are typically used for more heavy duty material than eyelets.
Can you use tie backs with eyelet curtains?
Tie backs aren’t usually needed on eyelet curtains, since they naturally stay in position when drawn. You might still choose to use them however, simply because you like the way they look.
Can you use any pole for eyelet curtains?
The only real difference between an eyelet pole and a normal metal curtain pole is the curtain pole rings. So if your pole is 28mm diameter or slightly smaller then it will be fine for your eyelet curtains.
Can you hang grommet curtains with rings?
Panels with grommets require rings that can open, slip through the grommets, and snap closed. You can also slide the grommets directly over the rod. With pinch pleat drapes, opt for eyelet rings, which feature hooks to connect to pin-on drapery hooks.
What is grommet tape?
Grommet drapery tape is created for you to have evenly spaced grommet drapery panels. The grommet tape gathers in the back to create consistent spacing and improves the ease of opening and closing your grommet drapery panels. Grommet tape is available in 6 yards packages or 36 yard rolls. 3 1/2″ width.
What is heading tape on curtains?
Pencil Pleat, also known as Tape Top or 3” Tape curtains, is the standard heading for curtains and valances. Pencil pleat curtain heading usually consists of three rows of string threaded through it for three hook positions to suit all types of track and pole.
How deep should curtain tape be?
Again, the most common depths for this type of tape are 45mm and 70mm. Arguably, this type of tape gives the neatest pleats. It should always be used with a curtain width factor of 2. The 45mm tape has 3 cords and two hook positions and the 70mm tape has four cords with two hook positions.
How do you hang eyelet curtains without a pole?
How to Hang Your Curtains Without Using a Rod 1 – Hooks. There are a number of hooks you can use to hang your curtains. 2 – Drawer Pulls. 3 – Rope. 4 – Tree Branches. 5 – Sports Equipment. 6 – Nails. 7 – Copper Pipes. 8 – Upholstery Tacks.
How many rings do I need for curtains?
Calculating Curtain Ring Needs One ring goes at each pleat to hang the panels securely. For flat panels, you usually need one ring for every 4 to 8 inches of curtain rod length. Heavier drapes need more rings that are closer together, while lightweight fabrics are usually fine with rings every 7 or 8 inches.
What is the difference between pinch pleat and pencil pleat?
Pinch pleats use more fabric and are fuller than pencil pleats. The pleats are hand-sewn in and permanently fixed for more luxurious, tailored look. As pinch pleat is a fixed, sewn-in heading, it is important that you quote an accurate track/pole width when ordering pinch pleats.
Do grommets hurt?
Grommets can be made of plastic or metal. They don’t hurt, and they allow air to enter the middle ear and drain the fluid to the back of the nose and throat. Grommets are also known as tympanostomy tubes or ventilation tubes.
Can you put grommets in plastic?
Metal grommets are most common because they’re the most durable, but rubber and plastic grommets are best used when you don’t want the grommet to have sharp edges. Fortunately, whatever type you’re using, installing grommets is a cinch if you have the right tools!.
How do you put grommets in rod pocket curtains?
To apply the grommets, you place one side of the grommet underneath the panel, centered on the hole, and the other side of the grommet on the other side of the fabric centered on the hole and snap them together.
How do you keep grommet curtains evenly spaced?
Grommet panels fall into gentle pleats when in the open position, but each pleat must be adjusted every time the drape is closed. To keep them in place requires a small sleight-of-hand trick from a drapery workroom that allows you to open and close the drapes with the pleats remaining even and adjustment free.
How many grommets do I need for a shower curtain?
Standard shower curtains are 72” square with twelve grommets or buttonholes across the top to correspond to the hook placement in the accompanying vinyl liner. Measure your tub or shower to be sure this size works for you and adjust as needed to fit.
What is eyelet tape?
Eyelet heading tape with plastic clips on the rear to help create uniform curves. Suitable for medium to lightweight fabrics. Eyelet rings sold separately.