Table of Contents
How to Install a Mantel Remove the old mantel. Add support by drilling holes for lag shields, then install lag bolts into the brick. Measure carefully and drill corresponding holes for the wood mantel. Push the wooden mantel carefully into place using wood glue for extra support.
How do you support a fireplace mantel?
Slide Over Bolts Method Locate the studs behind the brick, stone, or faux veneer. Drive 1/2in lag screws through each of the studs. Have a helper support the mantel while you mark the location of the support rods on the back of the beam. Apply construction adhesive into the holes. Slide into place, admire, and enjoy!.
How do I modernize my brick fireplace?
How do you modernize a red brick fireplace? Whitewash or paint the brick. Stucco over the brick. Add tile to the surround or whole fireplace. Add a new mantle to the existing fireplace.
What is a floating mantel?
Our mantels are hollow on the inside, providing an easy alternative to solid wood mantels. Live grain end caps maintain the look of a solid piece of wood. Each mantel is hand crafted from reclaimed longleaf pine, providing a unique look and character that cannot be duplicated.
What kind of screws do I need for brick?
Self-tapping brick anchors, concrete block or concrete screws are used for fastening items to brick. Concrete screws are most commonly called Tapcon® masonry screws. The heavy-duty masonry screw has the versatility for use in brick, mortar joints, CMU, block or solid concrete.
How are fireplace mantels attached?
As with many other forms of mantle or shelf, a fireplace mantel can be commonly attached to the wall with screws or lag bolts. Bolts are screwed into the wall above the fireplace before a mantel is slotted straight onto it. A rubber mallet can also be used to help ease the mantel out of position if it’s stuck.
How far above fireplace should mantle be?
As a general rule, it’s important to mount the mantle an average of 12 inches over the fireplace opening, which is a general rule from the National Fire Protection Agency (NFPA) to ensure it’s up to code. The mantle can also be 4 1/2 feet above the floor.
Is a red brick fireplace outdated?
Red brick fireplaces used to be a staple in the 1970’s. Its warm tones complemented the flames, but not much else. If you want to update a red brick fireplace that has seen children and grandchildren grow up, try whitewashing it. Whitewashing brick turns it a pale-grey color that gives it a new, modern feel.
How can I cover an old brick fireplace?
One way to update your fireplace is by covering it with tile. “Because tile requires a smooth surface, though, and brick is anything but, you will need to use a cement backer board,” advises J.B. Sassano, president of Mr.
How do you make old brick look modern?
Here are a few ways to update old brick to get a new look. Stain. If the color of the brick is your issue, staining is an option. Paint. Painting brick has become incredibly popular these days, especially for brick fireplaces. Whitewash. German Schmear. Final Thoughts.
Can you drill into stone fireplace?
All in all, drilling to masonry is completely achievable for a do it yourself-er. I definitely think drilling into brick/stone is easier than concrete but you can do it!Sep 28, 2021.
How do you bond wood to brick?
The best way to attach wood to brick without drilling is to use a brick wall hook. These hooks are designed for brick walls, even slightly curved ones. They are removable, adhesive-free, and strong (holds up to 25 lbs). You can install them in seconds and most importantly: no holes to drill.
What is the best adhesive for brick?
There are only a couple of glues that are rated strong enough to use with brick: Gorilla Glue and Rhino Glue.
How do you attach framing to brick?
Drill pilot holes through the frame where it will be in contact with the brick with a ¼ inch bit. Position the frame against the wall where it will rest. Remove the frame from the brick and set it aside. Reposition the frame against the brick, aligning the holes in the frame with the holes in the brick.
Should I drill through brick or mortar?
Mortar is easier to drill through because it’s a softer substance than brick and is also easier to patch or repair. Drilling into the mortar with a screw expansion plug or another fastener will cause the anchor’s force to push against the intact bricks instead of expanding the material.
Can you screw into brick without plugs?
Concrete / Masonry Frame Anchors High quality Concrete Anchor External Screws that cuts its own thread directly into pre-drilled 6mm pilot hole, no anchor or plug is needed. Masonry screws are an excellent way to fasten any material to masonry.
Do you need wall anchors for brick?
Drilling into Brick or Concrete To screw into brick there are only two things you need. Anchor screws ( Walldog, Tapcon, concrete screw, or screw anchor) and a masonry drill bit. A masonry drill bit is a regular old drill bit with a special tip on the end.
Do fireplaces need a mantel?
Do You Need A Fireplace Mantel? A fireplace does not need to be furnished with a mantel, but a mantel can enhance the look of a fireplace either as part of fireplace surround or as a standalone mantel shelf.
How thick are mantels?
A depth of 7 inches is ideal for most mantels, as it allows plenty of room to accommodate decorative objects. Keep in mind that the top and the sides of the mantel should be the same depth.
How wide are fireplace mantels?
For a quick reference, a 36-inch fireplace will probably have a mantel width of 48 inches. A 42-inch fireplace will probably have a mantel width of 54 inches. The mantel should not be so wide that it reaches anything else, like a wall, window or door.
How much weight can a fireplace mantel hold?
Combustible objects placed on or around the mantel must meet your fireplace manufacturer’s requirements for clearances to combustibles. DO NOT OVERLOAD MANTEL: THE MAXIMUM LOAD FOR ALL 60 INCH MANTELS is 150lbs. MAXIMUM LOAD FOR ALL 72 INCH MANTELs is 180lbs.
Can you put wood over a brick fireplace?
Masonry veneers are designed to follow a very straightforward installation process. Typically, installing wood facing over masonry is a two-part process: First mount batts (thin wood boards) to the masonry with concrete screws and then install the wood facing over these with regular screws or nails.
