Table of Contents
How do I access my evaporator coil?
To access the coils, remove the evaporator coil access panel. To remove the access panel, remove the metal tape that seals the panel. Next, remove the screws that secure the access panel of the evaporator coil to the air handler. You’ll notice that the evaporator coil is organized into a frame having two sides.
Where is the evaporator coil located?
Inside the home, the evaporator coil, sometimes referred to as the cooling coil, is located on the air intake side of the fan coil or the outlet side of the furnace. Its job is to remove heat from indoor air so the blower fan can return cool, refreshing air to the home.
Does a furnace have an evaporator coil?
The furnace evaporator coil plays one of the most critical roles in an HVAC system. It can sometimes be found inside your air handler but is commonly located within the furnace itself. The evaporator coils job is to help the refrigerant in the HVAC absorb heat from the surrounding air.
How do you unclog an evaporator coil?
Mix warm water and a simple detergent in a spray bottle, hand sprayer, or garden sprayer. Apply the water and detergent solution to the evaporator coils. Give the solution a few seconds to a few minutes to soak in and loosen debris. Reapply as needed.
How do you thaw an evaporator coil?
Give the Frozen Evaporator Coils Time to Thaw For your first step, turn the air conditioning system off and give the frozen evaporator coils a chance to thaw out. You can do this by shutting the unit off at the circuit breaker. Left to its own devices, it could take up to 24 hours for the coils to thaw completely.
How do I know if my evaporator coil is dirty?
Symptoms of a Dirty Coil Air Conditioning Loses Cooling Capacity. One thing that will be noticeable when the evaporator coil is dirty is that your AC won’t produce air that’s as cold as it should be. Air Conditioning Runs Longer. Coil Develops Frost During Operation. Have an HVAC Professional Clean Your Coils.
How do you test a dirty evaporator coil?
The most obvious sign of a dirty evaporator coil is an overall drop in system pressure. As long as you know what constitutes a normal pressure for your system, you should be able to tell if the current pressure is below that level. If it is, a dirty evaporator coil is probably your culprit.
How do I know if my evaporator coil is frozen?
Signs That You Have a Frozen Evaporator Coil Check for ice around the outdoor refrigerant line. Look around your air handler for condensation and moisture. Is your condensate drain pan full or overflowing? Open up your air handler and inspect evaporator coil for ice and/or condensation.
Where is the evaporator coil on a heat pump?
Located inside the blower compartment or air handler, the evaporator coil holds the chilled refrigerant that the compressor moves into it.
Where is condenser coil located?
The evaporator coil is located within the plenum of the indoor portion of the cooling system, while the condenser coil is located within the outdoor portion. The evaporator coil doesn’t produce cold; instead, it takes away heat by absorbing the latent heat within the air using the refrigerant within the coils.
What does an evaporator do with a furnace?
The evaporator coil is the component in your AC system that absorbs the heat from the air inside your home. It is often either attached to your furnace or located on the inside of your air handler. It works with a condenser coil to complete the heat exchange process that produces cool air.
Can evaporator coil get clogged?
Located deep within the indoor cabinet of your central air conditioner or heat pump, the evaporator coil may become clogged with dust, dirt, and debris over time. Mold, mildew, and algae can also grow over the coil, preventing your HVAC system from working properly.
How do you clean evaporator coils without removing them?
Step by Step Instructions Step 1: Remove the Glove Box. Step 2: Access the Evaporator Coil. Step 3: Spray the Cleaner on the Evaporator Coil Through the Access Point. Step 4: Rinse the Evaporator Coil. Step 5: Dry the Evaporator Coil. Step 6: Put Back the Blower Fan or Resistor Block or Seal the Hole You Drilled.
What causes the evaporator coil to freeze up?
One of the most common causes of a frozen evaporator coil is lack of system airflow. If there isn’t enough air blowing over your evaporator coil, the coil won’t have enough heat to absorb. This will cause the condensation on the coil to freeze over.
What causes the a coil to freeze up?
AC coils freeze for a variety of reasons—the most common, though, is lack of airflow. Dirty air filters or problems with your duct work can cause weak airflow, which hinders your equipment and its ability to keep coils warm and running properly. Temperatures drop and the AC coils freeze.
What causes furnace coils to freeze?
Low system airflow is one cause of coil icing, and a clogged filter definitely reduces airflow. When system airflow drops below specs, refrigerant circulating through the coil can’t extract sufficient heat energy. As the coil continues to condense water, ice inevitably forms on freezing coil surfaces.
