Table of Contents
The subfloor under the tile should be at least 1 1/8″ thick, with a minimum of 5/8″ thick exterior grade plywood topped by 1/2″ cement backer board.
What kind of plywood do you use under tile?
Tip: Make sure the subfloor will not deteriorate when it gets wet. Particleboard is not an acceptable subfloor material for tiling projects. Oriented strand board (OSB) and exterior-grade plywood will work if first covered with a latex-modified mortar and a tiling backer board.
Can you lay tile directly on plywood?
Tile can be laid on plywood. But do not install tile directly on the plywood subfloor itself. Use an intervening layer of a sheet of thinner plywood.
Is 3/4 subfloor enough for tile?
Tile installed over wood floor systems MUST have a minimum of 1-1/4 inches of solid material beneath it. This means you can have a 3/4 inch wood subfloor covered by 1/2 inch plywood, cement board, or approved gypsum fiber underlayment.
How thick should the plywood be for a bathroom floor?
Make Sure Your Subfloor is Structurally Stable The installation guide for 1/4 inch HardieBacker recommends having wood subfloors made of 5/8 inch exterior grade plywood or OSB (oriented strand board) that is 23/32 inches thick.
Do you need to seal plywood before tiling?
24 Answers from MyBuilder Tilers Plywood requires the application of a latex based bonding solution to the plywood to seal it and then the use of a flexible cement based adhesive, not pre-mixed tub adhesive.
Can I use cement board instead of plywood?
Cement backerboard is more stable than plywood in high humidity and other wet environments. It won’t swell and buckle the way that plywood does, so it’s safe to use in mudrooms and bathrooms where things like spills and puddles are normal, as well as in areas with high levels of moisture in the air.
Can you attach tile to wood?
Glue, called mastic, is the least expensive method for installing tiles. Mastic adheres the tile directly to a wooden sub-floor, to a wooden back-splash or onto a piece of plywood. Level the surface using a wood filler.
What kind of subfloor goes under tile?
Exterior-Grade Plywood Exterior plywood is an acceptable underlayment for tile and is preferred to interior-grade plywoods because the bonding adhesives used are waterproof. If water seeps through the tile installation to the underlayment, it will not cause the wood to swell, as happens with interior-grade plywood.
Is my subfloor strong enough for tile?
How Thick Does the Subfloor Need To Be for Tile? Tile is heavy, and the larger the floor you’re tiling and the thicker the tile, the heavier it’s going to be. That’s why, on average, your subfloor should be at least 1 ⅛” (2.86 cm) thick with a layer of concrete or ¾”-⅝” (1.91 to 1.59 cm) plywood or OSB underneath.
What subfloor should be under tile?
The subfloor under the tile should be at least 1 1/8″ thick, with a minimum of 5/8″ thick exterior grade plywood topped by 1/2″ cement backer board.
What is the best material for a bathroom subfloor?
Plywood as a Subfloor Material Traditionally, exterior grade plywood has been the subfloor material of choice for many bathroom flooring projects. Plywood is made by gluing alternating layers of wood veneer. CDX plywood (¾”) in particular is used often because it has a high level of resistance to moisture and humidity.
How do you waterproof a bathroom subfloor plywood?
Apply a bead of the silicone caulk around the entire perimeter of the subfloor. Place the angled part of the nozzle flat against the crevice between the subfloor and the bottom of the wall and squeeze the trigger slowly. Move the caulk gun evenly along the crevice to apply a bead of caulk.
Can you use 1 2 Hardibacker floors?
We recommend 1/4 in HardieBacker® board for floor applications, unless 1/2 in thickness is needed for transition.
What should I use to seal plywood before tiling?
This expansion gap should be filled with a silicone sealant to prevent it from being filled with tile adhesive when fixing your tiles. Before fixing your plywood overlay, ensure the reverse and edges of the boards have been sealed using BAL Bond SBR neat, as this reduces water permeability.
Can you tile on 6mm plywood?
6mm No More Ply is a pre-primed tile backer board which provides a flat, stable surface ready for floor tiling. The 6mm depth of the boards means there is minimum disruption to the height of the floor, so as to not cause too much of a height difference between adjoining rooms.
Which is stronger cement board or plywood?
If you compare the two configurations using identical thinset mortars, tiles installed over cement backerboard have greater shear-bond strength than those that are installed over plywood.
What is the best backer board for a shower?
Cement board is a good, reliable backer board that works well on both floors and walls. Keep in mind that most tile setters err on the side of caution and brush a waterproofing membrane on top of cement board when it is in wet areas like showers or tub surrounds.
Can you use cement board in a shower?
There are several acceptable applications of cement board in the shower. All applications pair up the tile board with some kind of waterproofing material, whether a liquid membrane, plastic sheeting, an uncoupling membrane like Schluter Kerdi, or a board that is already faced with waterproofing.
Do you have to put cement board under tile?
Whenever you’re laying tile on a wood subfloor, you need to first install cement backerboard to prevent leaks and water damage that could harm your flooring and the structure of your home. Unlike wood or drywall sub-surfaces, cement backerboard will not rot, warp or grow mold and mildew when exposed to water.
Do I have to use cement board under Wall Tile?
A backer board is not required for all wall tile. For instance, a tile backsplash in your kitchen can be installed over standard drywall. This is because the wall tile in your kitchen is exposed to minimal moisture compared to shower walls.6 days ago.
