Table of Contents
When a substantial area is covered, Thistle Hardwall is worked and ruled as in hand plastering. It is easier to attain the required thickness of plaster in one application by machine, but the total thickness should not normally exceed 25mm (subject to background suitability).
Can you plaster straight onto Hardwall?
You can plaster directly over hardwall the day after. As Wine~o said, pva either day before or prior to skimming. Try not to over saturate the hardwall as it will blister. Blue Grit will give a much longer workable time.
What’s the difference between Hardwall and bonding?
bonding is a undercoat plaster for low suction background like concrete. hardwall has high impact resistance and is quicker drying.
Can you Hardwall over Hardwall?
Hardwall is gypsum based so is not ideal to use on a solid wall in an older property. It will adhere fine, as it’s designed to go over brick and blockworkyou don’t pva, just wet the wall, but you would be better with either sand and cement or a renovating plaster due to the possibility of damp coming through.
Why is my bonding plaster cracking?
1-Reasons of plaster cracking or De-bonding Evaporation if the wall is not protected from sun and wind which can cause map cracking or dry shrinkage cracks. Suction into the walls if the blocks are absorbent and they have not been dampened which might cause drying shrinkage cracks. Bad or badly applied rush coat.
Should you PVA before dot and dab?
I would dilute pva with water, about 4-1 and roller it on as its quicker, when dry it will be hard and wont be sandy at all. Ideal for dot and dab.
Where should Hardwall plaster be used?
Hardwall Plaster: Hardwall is similar to Browning except that it offers a higher impact resistance and quicker drying surface. It is the most often used undercoat plaster these days, and can be applied to most masonry surfaces.
How thick should bonding plaster be?
How thick should a bonding coat be? Floating coats should be applied at a thickness of 8mm, up to a total plaster thickness of 25mm, and wire- scratched between each coat. The final floating coat should be ruled to an even surface and lightly scratched to form a key for Thistle Multi-Finish.
How soon can you plaster over bonding?
Bonding about 2-3 hours, but some do leave it to following day before skimming depends on size of area. The 3-4 days is a guide, the colour of the plaster will tell you when it’s dry enough to paint. Need to leave decent time between paint coats, for each to throughly dry before applying the next one.
Do I need to PVA a brick wall before plastering?
We seal all the walls with PVA (not needed on plasterboard), to make sure we can get a decent finish. It helps bond the plaster to the walls and also gives us time. Bricks have a high suction rate whereas plasterboard has a very low rate of suction (which is why PVA isn’t needed on boards).
Should I PVA before Hardwall?
You should put PVA on, but you cannot tile onto hardwall. It will need to be gone over with multifinish and then allowed to dry. A tiling sealer (not PVA) should then be applied prior to fixing tiles.
Can you put bonding on bonding?
Dental composite , or dental bonding can be added to a previous one, with ease, however there is particular protocols necessary, and the experience of the bonding dentist.
Can I use bonding plaster to fill holes?
Bonding coat can fill large holes/chunks. It’s all in the mix – your looking for a whipped cream consistency. I find it makes it very easy to apply. Slap it on and leave it rough, don’t try to finish it when it’s just been applied.
How long does Hardwall take to go off?
Bonding about 2-3 hours, but some do leave it to following day before skimming depends on size of area. The 3-4 days is a guide, the colour of the plaster will tell you when it’s dry enough to paint.
How much does it cost to plaster a 4 bedroom house UK?
Always ensure the final price you are quoted includes everything needed to do the job. 4 bedroom detached house – from £4,500 and 7-14 days for the finish.
How much does a 25kg bag of plaster cover?
One 25kg bag of magnetic plaster will cover five square-metres if applied at 3mm thickness.
How long do you leave bonding coat before skimming?
Bonding about 2-3 hours, but some do leave it to following day before skimming depends on size of area. The 3-4 days is a guide, the colour of the plaster will tell you when it’s dry enough to paint.
How much does a bag of Hardwall coverage?
Thistle HardWall
| Order Code | Nominal bag weight (kg) | Approx coverage (m²) |
|---|---|---|
| 06110/3 | 25 | 3.0 |
Is skimming cheaper than plastering?
Cost of re-skimming a room If your walls are already in good condition, you may only need to re-skim your room. This typically involves adding a 5-8 mm layer of finishing plaster over the top of existing plaster walls. So, it’s a lot cheaper than plastering a room from scratch.
Do you need to PVA before bonding?
2 Answers from MyBuilder Plasterers If the bonding cost has been gone over with a scarifier before it dried (like a hand held rake) to put little troughs in it for the finishing coat to adhere to then PVA is not required.
What’s the difference between plastering and skimming?
Skimming is the name given to a plastering technique where a wall is plastered with a layer of thin coat. It is usually applied to an existing plaster to smooth the surface. Another difference between skim and plaster is that plaster surfaces are always rough whereas a skimmed surface is smooth.
Which plaster is best for walls?
Cement plaster is the best bet when it comes to plastering exterior walls because it is moisture-resistant and will protect the wall against climate changes as well as environmental pollution. Moreover the durability factor in cement plaster makes it the ideal choice for internal plastering too.
Does Hardwall go off?
Kitchy said: Mate hardwall goes off quick in the best of times is it really worth it in using 2 bags!Mar 3, 2016
Is it OK to skim over old plaster?
The quick answer is yes, you can plaster over painted surfaces. If the paint is good quality and not in need of any maintenance, skimming over it with plaster is perfectly fine! When plastering over a painted wall that is in good condition, the first step you must take is to clean the surface thoroughly.
